Xerox Synergix 510dp User Manual

							TECHNICAL DATA
XEROX WIDE FORM AT 510dp OPERATOR MANUAL51
Media specifications
Table 8.  Media Specifications
Media type Recommended media types:
Bond – 20 to 24 lb (80 to 90 gsm) xerographic roll paper or cut sheets
Vellum/tracing – 20 lb (80 gsm)
Film - 4-millimeter thickness, double matte, heat stable
Media supply 3 rolls/500 feet (152 meters) each
Standard manual bypass for cut sheets
Media size Roll feed:
Width - 11 to 36 inches ( 279 to 914 mm)
Core diameter – 3 to 6.7 inches (76 to 170 mm)
Manual cut sheet feed:
Width - 11 to 36 inches (279 to 914 mm)
Minimum length – 8-1/2 inches (216 mm)
Print size Minimum:
Manual cut sheet feed (portrait) - 8-1/2 x 11 inches (216 x 279 mm)
Roll feed (landscape) – 11 x 8-1/2 inches (279 x 216 mm)
Maximum:
Manual cut sheet feed – 36 x 48 inches (914 x 1219 mm)
Roll feed - 36 inches x 80 feet (914 mm x 24 meters)
Downloaded From ManualsPrinter.com Manuals 
						

							TECHNICAL DATA
52XEROX WIDE FORM AT 510dp OPERATOR MANUAL
Space requirements
The illustration below shows the space requirements for normal
operation of the printer after installation.
The height clearance from the floor to the nearest overhead
obstruction within the floor space requirement is 78 inches (1981
mm).
NOTE:  Once installed, this machine is not considered movable.  If
moved, re-leveling of the machine will be required.
36 (914 mm)36 (914 mm)
Top view
129
(3277 mm)
83
(2108 mm)
36 (914 mm)
24 (610 mm)
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals