Xerox Phaser 6360DX User Manual

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-42 3.Fan the paper to release sheets that are stuck together.
4.Insert the paper into the tray. 
Note:Do not load the paper above the fill line indicated on the tray. Overloading the tray 
may cause jams. In the following illustration, 2 indicates the maximum fill line for 
transparencies, labels, glossy paper, and thin card stock.
6360-022
MAX
MAX
1 
2 
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-43 5.If necessary, press the paper guides inward to fit the paper.
Note:When the paper guides are adjusted correctly, there may be a small space between 
the paper and the guides.
6.Insert the tray into the tray slot, and push the tray completely into the printer.
7.On the control panel, select the glossy paper type:
a.Select 
Change setup, and then press the OK button.
b.Select 
Glossy Paper, and then press the OK button. 
8.In the printer...

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-44
Printing Custom Size Paper
In addition to the wide variety of standard paper sizes that you can use for printing, you can 
also print on custom size paper within the following dimensions.
Note:You can only print custom size paper from Tray 1 (MPT).
Printing Custom Size Paper from Tray 1 (MPT)
1.Open Tray 1 (MPT) by pulling out on the handle.
2.Pull out the tray extension, and open the paper guides.
Tray 1 (MPT)
Short edge 89 – 216 mm (3.5...

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-45 3.Insert the paper into Tray 1 (MPT), and adjust the paper guides to fit the paper. 
■The paper can be loaded with either the long or short edge entering first, as shown in 
the illustrations. 
■The maximum width is 216 mm (8.5 in.).
■For single-sided printing, if you are using preprinted or prepunched paper, place the 
side to be printed facedown with the top of the paper entering the printer first.
■For automatic 2-sided printing, if you...

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-46 7.If you selected 
New Custom Size:
a.For Short Edge, use the Up Arrow and Down Arrow buttons to specify the short 
edge, and then press the OK button.
b.For Long Edge, use the Up Arrow and Down Arrow buttons to specify the long 
edge, and then press the OK button.
c.If the control panel prompts you for the Paper Orientation, use the Up Arrow and 
Down Arrow buttons to select the direction you are feeding the paper into the tray.
Note:When...

Creating Custom Paper Types
Phaser® 6360 Color Laser Printer
3-47
Creating Custom Paper Types
You can define custom paper types using CentreWare IS. Access these custom types in the 
printer driver, control panel, and CentreWare IS. Use this feature to create your own custom 
paper type with specific settings that you can reuse for routine print jobs, such as, monthly 
reports. 
To create custom paper types:
1.Launch your web browser.
2.Enter the printer’s IP address in the browser’s Address field...

Phaser® 6360 Color Laser Printer
4-1 This chapter includes:
■Controlling the Quality of Your Prints on page 4-2
■Solving Print-Quality Problems on page 4-6
Print Quality
Downloaded From ManualsPrinter.com Manuals 

Controlling the Quality of Your Prints
Phaser® 6360 Color Laser Printer
4-2
Controlling the Quality of Your Prints
This chapter includes:
■Selecting a Print-Quality Mode on page 4-3
■Adjusting Color on page 4-4
The print-quality mode and color
 correction directly control the quality of your prints. The 
print-quality mode and paper type directly control the print speed. You can change these 
settings in the printer driver or on the control panel.
Note:Driver settings override the control panel settings....

Controlling the Quality of Your Prints
Phaser® 6360 Color Laser Printer
4-3
Selecting a Print-Quality Mode
There are three print-quality modes:
To select the print-quality mode in a supported driver:
Note:If your driver does not display the options listed in the table above, go to the website at 
www.xerox.com/drivers
 to download the latest driver.
Print-Quality Mode Type of Print Job
AutomaticAutomatically selects the optimal print-quality mode for the paper type 
selected. For example, Enhanced...

Controlling the Quality of Your Prints
Phaser® 6360 Color Laser Printer
4-4
Adjusting Color
The color correction options provide simulations of different color devices. Automatic is the 
default correction for general image processing. See the following table to determine what 
option you want to use.
Color Correction  Description
AutomaticApplies the best color correction to each graphic 
element: text, artwork, and photographs.
Office Color sRGB DisplayApproximates the colors on a CRT computer display....