Xerox Phaser 6360DX User Manual

Loading Paper
Phaser® 6360 Color Laser Printer
3-12
■For prepunched paper, place the paper with the holes toward the right side of the 
tray. 
Caution:Do not load paper or media above the fill line indicated on the tray. Overloading 
the tray may cause jams.
5.To use the current tray setup, press the OK button on the control panel. If you load a new 
type or size of paper in the tray, do the following:
a.Select 
Change setup, and then press the OK button.
b.Select the paper type, and then press the OK...

Loading Paper
Phaser® 6360 Color Laser Printer
3-13
Setting Tray 1 (MPT) Mode
Tray 1 (MPT) Mode defines the printer’s media handling behavior to better fit the kind of 
printing you want to do. Three distinct modes determine how paper type and size are set for 
Tray 1 (MPT), and which tray is used if you do not select a specific tray:
Automatic (Factory Default): Tray 1 (MPT) is the highest priority tray. It allows incoming 
print jobs to set paper type and size. It prints from Tray 1 (MPT) if paper is...

Loading Paper
Phaser® 6360 Color Laser Printer
3-14
Macintosh
To select manual feed using Macintosh OS X, version 10.2 or higher:
1.In the Print dialog box, select Paper Feed from the drop-down list.
2.Select Manual Feed in the All pages from drop-down list.
3.Submit your print job.
4.When prompted by the control panel, remove the paper from Tray 1 (MPT). 
5.Load the appropriate paper for your job into the tray.
See also: 
Loading Paper in Tray 1 (MPT) on page 3-9
Loading Paper in Trays 2–5
Use Trays 2–5...

Loading Paper
Phaser® 6360 Color Laser Printer
3-15 To load paper into Trays 2–5:
1.Pull out the tray.
2.If necessary, open the paper guides:
■Squeeze the green tab on the length guide, and then slide it back. The guide clicks into 
place.
■Slide the green side guides outward.
6360-020
6360-021
Downloaded From ManualsPrinter.com Manuals 

Loading Paper
Phaser® 6360 Color Laser Printer
3-16 3.Fan the paper to release sheets that are stuck together.
4.Insert paper into the tray. If you are using preprinted or prepunched paper, follow these 
guidelines:
■For single-sided printing, place the side to be printed faceup with the top of the page 
toward the front of the tray.
■For 2-sided printing, place the first side to be printed with the odd-numbered pages 
facedown and the top of the page toward the back of the tray. For more information 
on...

Loading Paper
Phaser® 6360 Color Laser Printer
3-17
■For prepunched paper, place the paper with the holes toward the right side of the 
tray.
Caution:Do not load paper above the fill line indicated on the tray. Overloading the tray 
may cause jams. In the following illustration, 1 indicates the maximum fill line for paper 
and 2 indicates the maximum fill line for transparencies, labels, glossy paper, and thin card 
stock.
6360-049
6360-022
MAX
MAX
1 
2 
Downloaded From ManualsPrinter.com Manuals 

Loading Paper
Phaser® 6360 Color Laser Printer
3-18 5.If necessary, press the paper guides inward to fit the paper.
Note:When the paper guides are adjusted correctly, there may be a small space between 
the paper and the guides.
6.Insert the tray into the tray slot, and push the tray completely into the printer.
7.To use the current tray setup, press the OK button on the control panel. If you load a new 
type of paper in the tray:
a.Select 
Change setup, and then press the OK button.
b.Select the paper...

Selecting Printing Options
Phaser® 6360 Color Laser Printer
3-19
Selecting Printing Options
This section includes:
■Selecting Printing Preferences (Windows) on page 3-19
■Selecting Options for an Individual Job (Windows) on page 3-20
■Selecting Options for an Individual Job (Macintosh) on page 3-21
See also: 
Advanced Features Guide at www.xerox.com/office/6360support
Selecting Printing Preferences (Windows)
Printer preferences control all of your print jobs, unless you override them specifically for a...

Selecting Printing Options
Phaser® 6360 Color Laser Printer
3-20
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before 
sending the job to the printer. For example, if you want to use Photo print-quality mode for a 
particular graphic, select this setting in the driver before printing that job.
1.With the desired document or graphic open in your application, access the Print dialog 
box.
2.Select the Phaser...

Selecting Printing Options
Phaser® 6360 Color Laser Printer
3-21
Selecting Options for an Individual Job (Macintosh)
To select print settings for a particular job, change the driver settings before sending the job to 
the printer.
1.With the document open in your application, click File, and then click Print.
2.Select the desired printing options from the menus and drop-down lists that are displayed.
Note:In Macintosh OS X, click Save Preset on the Print menu screen to save the current 
printer settings....