Xerox Phaser 6360DX User Manual

Printer Configurations
Phaser® 6360 Color Laser Printer
1-5
Options
You can order additional trays, memory, and a hard drive if these items are not standard on 
your printer. Print the Configuration page to see which options are already installed. To print 
the Configuration page, see Information Pages on page 1-7.
Additional Trays
■550-Sheet Feeder
■1100-Sheet High-Capacity Feeder
Phaser 6360 printers can have feeders in the following combinations:
■One 550-Sheet Feeder (Tray 3)
■One 1100-Sheet...

Control Panel
Phaser® 6360 Color Laser Printer
1-6
Control Panel
This section includes:
■Control Panel Features on page 1-6
■Control Panel Layout on page 1-6
■Menu Map on page 1-7
■Information Pages on page 1-7
■Sample Pages on page 1-7
Control Panel Features
The control panel:
■Displays the printer’s operating status (for example, Printing, Ready to Print), printer 
errors, and warnings.
■Prompts you to load paper, order and replace supplies, and clear jams.
■Enables you to access tools and information...

Control Panel
Phaser® 6360 Color Laser Printer
1-7
Menu Map
The Menu Map helps you navigate the control panel menus. To print the Menu Map:
1.On the control panel, select 
Information, and then press the OK button.
2.Select 
Menu Map, and then press the OK button to print.
Note:Print the Menu Map to see other information pages available for printing.
Information Pages
Your printer comes with a set of information pages to help you obtain the best results from 
your printer. Access these pages from the...

Control Panel
Phaser® 6360 Color Laser Printer
1-8
Color Sampler Pages
The color sampler pages are designed to help you select colors to use in your print jobs. Each 
sampler page lists either the percentages of cyan, magenta, yellow, and black that are used, or 
the amounts (from 0 to 255) of red, green, and blue that are used.
Note:Before you print the sampler pages, select the appropriate PostScript Setup settings for 
the default print-quality mode and color correction from the Printer Setup menu on...

More Information
Phaser® 6360 Color Laser Printer
1-9
More Information
This section includes:
■Resources on page 1-9
■Xerox Support Centre on page 1-10
Obtain information regarding your printer and its capabilities from the following sources.
Resources
Information Source
Installation Guide* Packaged with printer
Quick Use Guide* Packaged with printer
User Guide (PDF)* Software and Documentation CD-ROM 
Advanced Features Guide (PDF)www.xerox.com/office/6360support
Quick Start...

More Information
Phaser® 6360 Color Laser Printer
1-10
Xerox Support Centre
The Xerox Support Centre is a utility that is installed during printer driver installation. It is 
available for printers with Windows 2000 and later or Mac OS X, version 10.2 and higher.
The Xerox Support Centre appears on the desktop for Windows printers or is placed in the 
Mac OS X dock. It provides a central location for accessing the following information:
■User manuals and video tutorials
■Solutions to troubleshooting...

Phaser® 6360 Color Laser Printer
2-1 This chapter includes:
■Overview of Network Setup and Configuration on page 2-2
■Choosing a Connection Method on page 2-3
■Configuring the Network Address on page 2-5
■Installing the Printer Drivers on page 2-9
This chapter provides basic information about setting up and connecting to your printer. 
See also: 
Advanced Features Guide at www.xerox.com/office/6360support
Network Basics
Downloaded From ManualsPrinter.com Manuals 

Overview of Network Setup and Configuration
Phaser® 6360 Color Laser Printer
2-2
Overview of Network Setup and Configuration
To set up and configure the network:
1.Connect the printer to the network using the recommended hardware and cables.
2.Turn on the printer and the computer.
3.Print the Configuration page and keep if for referencing network settings.
4.Configure the printer’s TCP/IP address, which is required to identify the printer on the 
network. 
■Windows operating systems: Run the Installer on...

Choosing a Connection Method
Phaser® 6360 Color Laser Printer
2-3
Choosing a Connection Method
Connect the printer via Ethernet or USB. A USB is a direct connection and is not used for 
networking. An Ethernet connection is used for networking. Hardware and cabling 
requirements vary for the different connection methods. Cabling and hardware are generally 
not included with your printer and must be purchased separately. This section includes:
■Connecting via Ethernet (Recommended) on page 2-3
■Connecting...

Choosing a Connection Method
Phaser® 6360 Color Laser Printer
2-4
Connecting via USB
If you are connecting to one computer, a USB connection offers fast data speeds. However, a 
USB connection is not as fast as an Ethernet connection. To use USB, PC users must have 
Windows 2000/XP/Server 2003 or newer. Macintosh users must use Mac OS X, version 10.2 
and higher. 
USB Connection
A USB connection requires a standard A/B USB cable. This cable is not included with your 
printer and must be purchased...