Xerox Phaser 6280DN User Manual

Control Panel Menus
Phaser® 6280 Printer
92
Changing Menu Settings
Changing the Power Saver Time
In this example, you set the transitional time to the Power Saver Mode.
1. To display the menu screen, press the Menu button at the print screen.
2. Press the Up Arrow or Down Arrow button until 
Admin Menu is displayed, and then 
press the For wa rd  A r row or OK button.
3. Press the Up Arrow or Down Arrow button until 
System Setup is displayed, and then 
press the For wa rd  A r row or OK button.
4. Press...

Description of Menu Items
Phaser® 6280 Printer
93
Description of Menu Items
This section includes:
•Tra y  S e t t i n g s on page 93
•Information Pages on page 95
•Billing Meters on page 96
•Admin Menu on page 96
Tray  S e t t i n g s
There are three submenus under the Tray Settings menu: Tray 1 (MPT), Tray 2, and Tray 3. 
You can set paper size and paper type for each tray under these menus. (Display Pop-up 
and MPT Mode can only be set for Tray 1 (MPT).)
Tray 3 is displayed only when the optional...

Description of Menu Items
Phaser® 6280 Printer
94
Settings Exclusive to Tray 1 (MPT)
When the size or type of paper that is loaded is different from the setting, the print quality 
may fall or paper may jam. Specify the correct paper type and size.
When installing the optional sheet feeders if Paper Tray is set to Auto on the print driver, 
the feeding tray is automatically specified according to the setting on the control panel. 
Also, when the paper size and type setting for each tray is the same,...

Description of Menu Items
Phaser® 6280 Printer
95
Information Pages
Prints various types of reports and lists.
• The information pages are printed on A4 size paper. Load A4 size paper into the tray. 
• For the procedure for printing information pages, refer to Printing Information Pages 
on page 95.
Printing Information Pages
Information pages are printed from the control panel.
1. Press the Menu button to display the Menu screen.
2. Press the Up Arrow or Down Arrow button until 
Information Pgs is...

Description of Menu Items
Phaser® 6280 Printer
96
Billing Meters
Displays the number of processed print jobs on the control panel. The meter is divided 
according to the color modes.
See also: 
Checking Page Counts on page 149
Admin Menu
This menu contains these submenus:
•Network Setup
•USB Setup
•System Setup
• Maintenance Mode
•PCL Setup
• PostScript Setup
•Control Panel
Item Description
Color Impressions Displays the total number of pages printed in color.
Black Impressions Displays the total number...

Description of Menu Items
Phaser® 6280 Printer
97
Network Setup
Specifies printer settings affecting jobs sent to the printer through a network port.
• The settings in the Network Setup menu cannot be set when entering this menu during 
printing.
• You need to restart the printer to activate the new settings. After making the settings, 
turn off the printer and then turn it on again.
Item Description
Ethernet Specifies the communication speed and the modes of Ethernet.
 Auto (default)
Automatically...

Description of Menu Items
Phaser® 6280 Printer
98
USB Setup
Use USB Setup for setting the USB port’s status.
System Setup
System Setup menu is used to make the printer operation settings, such as for alarm and 
power saver mode.
Item Description
Port Status  Select either Enable or Disable.
Adobe Protocol Specifies the PostScript communication protocol: Standard, 
BCP, TBCP, Binary, or Auto.
Item Description
PowerSaver Timer Specify the transitional time to Power Saver between 5 and 60 minutes in...

Description of Menu Items
Phaser® 6280 Printer
99
Auto Log Print Specifies whether to automatically print information about the printed data that has 
been processed in the printer (Job History Report).
Off (default)
Select this if you do not want to print the Job History Report automatically 
even if the number of print jobs exceeds 22.
On
Automatically prints a report when the number of print jobs reaches 22.
 You cannot set this during printing.
 You can print the Job History Report from the...

Description of Menu Items
Phaser® 6280 Printer
100
RAM Disk Allocates memory to the RAM Disk file system for the secure print, collating jobs, and 
Sample print features.
Enable 
Allocates memory for using the secure print and proof print features.
Disable (default)
Does not allocate memory for using the secure print and proof print features.
This item is displayed when at least 256 MB of memory are added.
Size Mismatch Specifies the action to take when the driver paper size settings do not match the...

Description of Menu Items
Phaser® 6280 Printer
101
Maintenance Mode
Use this menu to initialize the NVM, or to adjust the configurations for each type of paper.
Item Description
FW Version Displays the current firmware version.
Auto Regi Adjust Adjust the color registration automatically. Selecting On adjusts the color registration 
automatically. The default is On.
Adjust ColorRegi Correct the color registration manually. For details, refer to Color Registration on 
page 111.
Auto Adjust 
Correct the...