Xerox Phaser 6130 User Manual
Have a look at the manual Xerox Phaser 6130 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Setting Paper Types and Sizes Phaser® 6130 Printer 4-7 Setting Paper Types and Sizes Setting the Paper Tray When loading paper in the paper tray, set the paper size and type on the control panel when printing. Note: When you set select None from the Paper Type dropdown in the PostScript driver, printing will default to the control panel settings. Printing will be performed only when the settings for the paper size and type configured on the print driver match the settings on the control panel. When the settings on the print driver and control panel do not match, follow the instructions displayed on the control panel. See also: Description of Menu Items on page 5-4 Setting Paper Types Caution: Paper type settings must match those of the actual paper loaded in the trays. Otherwise, print-quality problems can occur. 1.Press the Menu button to display the Menu screen. 2.Select Tray Settings, and then press the OK button. 3.Select the tray, and then press the OK button. 4.Select Paper Type, and then press the OK button. 5.Select the correct paper type for the loaded paper, and then press the OK button. 6.Press the Menu button. Setting Paper Sizes 1.Press the Menu button to display the Menu screen. 2.Select Tray Settings, and then press the OK button. 3.Select the tray, and then press the OK button. 4.Select Paper Size, and then press the OK button. 5.Press the Menu button. Downloaded From ManualsPrinter.com Manuals
Loading Paper Phaser® 6130 Printer 4-8 Loading Paper This section includes: ■Loading Paper in the Paper Tray on page 4-8 ■Loading Paper in the Manual Feed Slot on page 4-12 Loading Paper in the Paper Tray Use the paper tray for a wide range of media including: ■Plain paper ■Card stock ■Labels ■Glossy paper ■Specialty media including business cards, postcards, trifold brochures, and weatherproof paper ■Pre-printed paper (paper already printed on one side) ■Custom size paper See also: About Paper on page 4-5 Paper Tray video tutorial at www.xerox.com/office/6130support Loading Paper in the Paper Tray In addition to plain paper, the paper tray can use various other sizes and types of print media, such as envelopes. Make sure of the following points when loading paper in the paper tray. You can load up to 250 sheets or a stack of paper (65 – 220 g/m2, 17 – 40 lb. Bond, 40 -80 lb. Cover) less than 15 mm high. Sizes can start from 3 x 5”. ■Paper tray accepts print media within the following dimensions: ■Width: 76.2 – 216.0 mm (3 – 8.5 in.) ■Length: 127.0 – 355.6 mm (5 – 14 in.) Downloaded From ManualsPrinter.com Manuals
Loading Paper Phaser® 6130 Printer 4-9 Make sure of the following points to avoid any troubles during printing. ■Do not load different types of paper at the same time. ■Use high quality paper for laser printers to print at high quality. See About Paper on page 4-5. ■Do not remove or add paper to the tray when printing, or if there is any paper still in the tray. Doing so may cause a paper jam. ■Do not put any objects other than paper on the tray. Also, do not push or force down the paper tray. ■Always load paper short-edge feed. To load paper in the paper tray: 1.Gently pull open the paper tray. 2.Open the output tray to hold the printed sheets. 6130-001 6130-021 Downloaded From ManualsPrinter.com Manuals
Loading Paper Phaser® 6130 Printer 4-10 3.Slide the width guides to the edge of the tray. The width guides should be fully extended. 4.Insert all media faceup and top edge first into the paper tray. Note: Do not force the paper. 6130-059 6130-052 Downloaded From ManualsPrinter.com Manuals
Loading Paper Phaser® 6130 Printer 4-11 5.Slide the width guides until they rest lightly against the edge of the paper stack. Note: Be careful not to bend the paper. When Size Mismatch is set to Use Printer Settings in the PostScript driver, you need to set the paper type and size settings for the tray on the control panel in advance. See also: Setting Paper Types and Sizes on page 4-7 6130-052 Downloaded From ManualsPrinter.com Manuals
Loading Paper Phaser® 6130 Printer 4-12 Loading Paper in the Manual Feed Slot Use the Manual Feed Slot for a wide range of media including: ■Plain paper ■Thin card stock ■Glossy paper ■Labels ■Envelopes See also: Printing on Specialty Media on page 4-20 Loading Paper in the Manual Feed Slot This section describes how to feed paper in the manual feed slot. Make sure of the following points to avoid any troubles during printing. ■Use several sheets of the media when adjusting the paper width guides. ■Slowly and evenly insert the media into the printer holding the media on both sides. ■If the media looks skewed after the printer pulls it in, gently remove the media and reseat it. Then press the OK button or wait for the automatic calibration to start. 1.Slide the width guides of the manual feed slot to fit the appropriate media. 6130-020 Downloaded From ManualsPrinter.com Manuals
Loading Paper Phaser® 6130 Printer 4-13 2.Open the output tray to hold the printed sheets. 3.Place the print media into the slot with the print side facedown and the top of the sheet entering the printer first. 6130-021 6130-051 Downloaded From ManualsPrinter.com Manuals
Selecting Printing Options Phaser® 6130 Printer 4-14 Selecting Printing Options This section includes: ■Selecting Printing Preferences (Windows) on page 4-14 ■Selecting Options for an Individual Job (Windows) on page 4-15 ■Selecting Options for an Individual Job (Macintosh) on page 4-17 Selecting Printing Preferences (Windows) Printer preferences control all of your print jobs, unless you override them specifically for a job. To select printer preferences: 1.Select one of the following options: ■Windows 2000, Windows Server 2003, and Windows Vista: Click Start, select Settings, and then click Printers. ■Windows XP: Click Start, Settings, and then select Printers and Faxes. 2.In the Printers folder, right-click the icon for your printer. 3.From the pop-up menu, select Printing Preferences or Properties. 4.Select the Advanced tab, and then click the Printing Defaults button. 5.Make selections on the driver tabs, and then click the OK button to save your selections. Note: For more information about Windows printer driver options, click the Help button on the printer driver tab to view the online help. Downloaded From ManualsPrinter.com Manuals
Selecting Printing Options Phaser® 6130 Printer 4-15 Selecting Options for an Individual Job (Windows) If you want to use special printing options for a particular job, change the driver settings before sending the job to the printer. For example, if you want to use Enhanced print-quality mode for a particular graphic, select this setting in the driver before printing that job. 1.With the desired document or graphic open in your application, access the Print dialog box. 2.Select the Phaser 6130 printer and click its Properties button to open the printer driver. 3.Make selections from the driver tabs. See the following table for specific printing options. Note: In the PCL driver for Windows 2000, Windows XP, Windows Server 2003, and Windows Vista, you can save current printing options with a distinctive name and apply them to other print jobs. Select Saved Settings at the bottom of the tab. Click the Help button for more information. 4.Click the OK button to save your selections. 5.Print the job. Downloaded From ManualsPrinter.com Manuals
Selecting Printing Options Phaser® 6130 Printer 4-16 See the following table for specific PCL printing options: Note: If your driver does not display the options listed in the table above, see Enabling Options on page 7-11 for more information. PCL Printing Options for Windows Operating Systems Operating System Driver Tab Printing Options Windows Vista, Windows 2000, Windows XP, or Windows Server 2003Paper/Output tab ■Job Type ■Document size, paper type, and tray selection ■Feed orientation ■Saved Settings ■Printer Status Image Options tab ■Output Color ■Image Quality ■Image adjustment, image type, image correction ■Image Settings ■Color Balance ■Profile Settings Layout tab ■Pages per sheet (N-up) ■Image Orientation ■Booklet/Poster/Mixed Document/Rotation layout ■Output Size ■Margin Shift Watermarks/Overlays tab ■Water mar ks ■Overlays Advanced tab ■Skip Blank Pages ■Draft Mode ■Banner Sheet ■Tray Mapping ■Graphics Settings ■Font Settings Downloaded From ManualsPrinter.com Manuals