Xerox Phaser 6130 User Manual

							Main Components and Their Functions
Phaser® 6130 Printer
2-2
Main Components and Their Functions
This section includes:
 ■Front View on page 2-2
■Rear View on page 2-3
■Internal View on page 2-4
■Printer Configuration on page 2-5
Front View
1.Control panel
2.Front cover
3.Button for opening the front cover
4.Manual feed slot
5.Paper tray
6.Toner cartridges
7.Output tray
1
7
6
2
3
45
6130-073
Downloaded From ManualsPrinter.com Manuals 
						

							Main Components and Their Functions
Phaser® 6130 Printer
2-3
Rear View
1.Multi protocol network card (MPC)
2.Optional memory slot
3.Network connector4.USB port
5.Power cord connector
6.Powe r  sw i tc h
2
345
6
1
6130-075
Downloaded From ManualsPrinter.com Manuals 
						

							Main Components and Their Functions
Phaser® 6130 Printer
2-4
Internal View
1.Fuser
2.Imaging unit
3.Button for opening the front cover
4.Transfer unit
1
2
3
4
6130-074
Downloaded From ManualsPrinter.com Manuals 
						

							Main Components and Their Functions
Phaser® 6130 Printer
2-5
Printer Configuration
* All configurations have one memory slot supporting 256 MB/512 MB/1024 MB DDR2 
DIMMs, to a maximum of 1152 MB. Standard memories are soldered on board.
Options
You can order additional memory and a multi-protocol card if these items are not standard on 
your printer.
Memory
The printer features one slot that accepts 256, 512 or 1024 MB of DDR2 DIMMs.
Multi-Protocol Network Card
The multi-protocol network card provides additional protocols and security features including 
IPP, SMB, NetWare, WINS, DDNS, SSL/HTTPS, and IPv6.
FeaturesPrinter Configuration
6130
Memory Configuration* 128 MB
Print Speed (Color/Mono) 12/16 sheets/min
Resolutions (dpi)
Standard 600 x 600 x 1 bit
Enhanced 600 x 600 x 4 bit
Ethernet Interface 10/100 Base-Tx
Manual feed slot (1 Sheet) Standard
Paper Tray (250 Sheet) Standard
Downloaded From ManualsPrinter.com Manuals 
						

							Control Panel
Phaser® 6130 Printer
2-6
Control Panel
This section includes:
 ■Control Panel Layout on page 2-6
■Display on page 2-6
■Menu Map on page 2-7
■Information Pages on page 2-7
Control Panel Layout
Display
There are two types of screens:
■Print screen (for displaying printer status)
■Menu screen (for configuring settings)
1.Graphic display indicates status messages, 
menus, and toner levels.
2.Menu button
Scrolls to the menu operation. Switches the 
display between the menus and print screen.
3.OK button
Sets the menu values. Also prints reports and 
lists.
4.Wake Up button
This light is on in power saver mode. Push the 
button to exit power saver mode.
5.Cancel Job button
Cancels the current print job.6.Up Arrow button
Scrolls upward through the menus.
Down Arrow button
Scrolls downward through the menus.
Back Arrow button
Scrolls backwards through the menus, or 
displays the Walk-Up Features menu.
Forward Arrow button
Scrolls forward through the menus.
7.Error
The red light indicates an error condition.
8.Ready
The green light indicates that the printer is 
ready to receive data from the computer. If the 
light is blinking, the printer is busy receiving 
data.
6130-076
123
5678
4
Downloaded From ManualsPrinter.com Manuals 
						

							Control Panel
Phaser® 6130 Printer
2-7
Information Pages
Your printer comes with a set of information pages to help you obtain the best results from 
your printer. Access these pages from the control panel. Print the Menu Map to see where 
these information pages are located in the control panel menu structure.
Menu Map
The Menu Map helps you navigate the control panel menus. To print the Menu Map:
1.On the control panel, press the 
Menu button, select Information Pages, and then press the 
OK button.
2.Select 
Menu Map, and then press the OK button to print.
Note: Print the Menu Map to see other information pages available for printing.
Configuration Page
To print the Configuration page to view current information about your printer, do the 
following:
1.On the control panel, press the 
Menu button, select Information Pages, and then press the 
OK button.
2.Select 
Configuration, and then press the OK button to print.
 
Downloaded From ManualsPrinter.com Manuals 
						

							Power Saver Mode
Phaser® 6130 Printer
2-8
Power Saver Mode
The printer is equipped with a Power Saver mode to reduce power consumption when it is left 
idle.
When no print data is received for 30 minutes (default), the printer will enter Power Saver 
mode.
The time ranges that can be specified for the printer to enter Power Saver mode are 5 to 
60 minutes. Consumption of power during the Power Saver mode is 5 W or less and the time 
required to exit from Power Saver mode to a print-ready status is about 15 seconds.
See also: 
Changing the Power Saver Time on page 5-3
Exiting the Power Saver Mode
The printer automatically cancels Power Saver mode once it receives data from the computer.
To cancel the Power Saver mode manually, press the Wa k e  U p  button.
Downloaded From ManualsPrinter.com Manuals 
						

							Checking Status of Print Data
Phaser® 6130 Printer
2-9
Checking Status of Print Data
Checking in Windows
Printer information and status are displayed on the Status window. Double-click the 
PrintingScout printer icon on the task bar at the bottom right of the screen. From the displayed 
window, check the column Status.
You can change the display contents with the button on the left of the Printer Status window.
Status Setting button: Displays the Status Setting screen and allows you to check the printer 
name, printer connection port, and printer status.
For more information about PrintingScout, see the help:
1.From the Start menu, select Programs.
2.Select Xerox Office Printing.
3.Select PrintingScout.
4.Select PrintingScout Help.
Checking in CentreWare Internet Services
You can check the status of the print job sent to the printer at the Jobs tab of CentreWare 
Internet Services.
Downloaded From ManualsPrinter.com Manuals 
						

							Displaying Optional Accessory Configuration and Paper Tray Settings
Phaser® 6130 Printer
2-10
Displaying Optional Accessory Configuration and 
Paper Tray Settings
Print the Configuration page to view the current information about your printer:
1.On the control panel, press the 
Menu button, select Information Pages, and then press the 
OK button.
2.Select 
Configuration, and then press the OK button to print.
Downloaded From ManualsPrinter.com Manuals 
						

							More Information
Phaser® 6130 Printer
2-11
More Information
Obtain information regarding your printer and its capabilities from the following sources.
Resources
Information Source
Installation Guide* Packaged with printer
Quick Use Guide* Packaged with printer
User Guide (PDF)* Software and Documentation CD-ROM 
Quick Start Tutorials (English only)www.xerox.com/office/6130support
Video Tutorialswww.xerox.com/office/6130support
Recommended Media ListRecommended Media List (United States)
Recommended Media List (Europe)
Online Support Assistantwww.xerox.com/office/6130support
Technical Supportwww.xerox.com/office/6130support
Information pages Control panel menu
* Also available on the Support website.
Downloaded From ManualsPrinter.com Manuals