Xerox Phaser 6010N User Manual

Troubleshooting
Phaser 6000/6010 Color Printer
User Guide61
Adjusting Altitude
Print quality varies with barometric pressure. Since the barometric pressure decreases as the altitude 
increases, the altitude can affect the print quality of the printer. To optimize print quality for your 
location, select the altitude setting on your printer to match the altitude of your location.
To adjust altitude:
1. On your computer, click Start > All Programs > Xerox Office Printing > Phaser 6000/6010 > 
Printer...

Troubleshooting
Phaser 6000/6010 Color Printer
User Guide 62
Downloaded From ManualsPrinter.com Manuals 

4
Phaser 6000/6010 Color Printer
User Guide63
Printer Specifications
This chapter includes:
•Physical Specifications on page 64
•Clearance Requirements on page 65
•Environmental Specifications on page 66
•Electrical Specifications on page 67
•Performance Specifications on page 68 
Downloaded From ManualsPrinter.com Manuals 

Printer Specifications
Phaser 6000/6010 Color Printer
User Guide 64
Physical Specifications
Weights and Dimensions
Width: 394 mm (15.5 in.)
Depth (with paper tray open): 429.5 mm (16.9 in.)
Height (with output tray open): 294 mm (11.7 in.)
Weight:
• Phaser 6010 Color Printer: 10.7 Kg (23.6 lb.)
• Phaser 6000 Color Printer: 10.6 Kg (23.4 lb.)
Downloaded From ManualsPrinter.com Manuals 

Printer Specifications
Phaser 6000/6010 Color Printer
User Guide65
Clearance Requirements
Total Space Requirements
Width = 80.1 cm (31.5 in.)
Depth = 92.5 cm (36.4 in.)
Height = 39.4 cm (15.5 in.)
Clearance Requirements
p60xx_015
10 cm
(3.9 in.)
30 cm
(12.1 in.)29.5 cm
(11.6 in.)
33 cm
(13 in.)
Downloaded From ManualsPrinter.com Manuals 

Printer Specifications
Phaser 6000/6010 Color Printer
User Guide 66
Environmental Specifications
Temperature
10°–32°C (50°–90°F)
Relative Humidity
Note: Under extreme environment conditions, such as 10°C and 85%RH, defects can occur due to 
condensation approximately 30 minutes after the printer is turned on.
15–85% RH at 28°C (82°F)
Elevation
For optimum performance, use the printer at elevations below 3,100 m (10,170 ft.).
Downloaded From ManualsPrinter.com Manuals 

Printer Specifications
Phaser 6000/6010 Color Printer
User Guide67
Electrical Specifications
Power Source
• 110–127 V, 50/60 Hz, 10 A or less
• 220–240 V, 50/60 Hz, 5 A or less
Power Consumption
• Power Saver mode 2: 7 W or less 
• Power Saver mode 1: 14W or less
• Standby mode: 35 W or less (fuser on)
• Continuous color printing: 265 W or less
• Continuous monochrome printing: 265W or less
This printer does not consume electric power when the power switch is turned off even if the printer is 
connected...

Printer Specifications
Phaser 6000/6010 Color Printer
User Guide 68
Performance Specifications
ItemSpecification
Warm-up time Power on: 25 seconds or less.
Recovery from Energy Saver mode: 25 seconds or less.
(assume temperature of 22°C/71.6°F)
Phaser 6000 printer continuous print speed Color: 10 ppm
Black and White: 12 ppm
Note:Print speed can decrease due to paper type, paper size, 
printing conditions, or image quality adjustment.
Phaser 6010 printer continuous print speed Color: 12 ppm
Black and...

A
Phaser 6000/6010 Color Printer
User Guide69
Regulatory Information
This chapter includes:
•Electromagnetic Interference on page 70
•Other Regulations on page 72
•Material Safety Data Sheets on page 73
Downloaded From ManualsPrinter.com Manuals 

Regulatory Information
Phaser 6000/6010 Color Printer
User Guide 70
Electromagnetic Interference
Xerox® has tested this product to electromagnetic emission and immunity standards. These standards 
are designed to mitigate interference caused or received by this product in a typical office 
environment.
United States FCC Regulations
This equipment was tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide...