Xerox DocuPrint 4590 EPS User Manual

Xerox 4590 EPS/4110 EPS User Guide
7-9
7. Specifications
NOTE:The booklet output tray is used for the booklet finisher.
Folder module (Z and C fold) - optional 
Dimensions occupiedWith body + D2 Finisher 
• 90.3” (width) × 30.7” (depth)
• 2,294 mm (width) × 781 mm (depth)
(with Tray 5 (Bypass) completely extended)
With body + Booklet D2 Finisher
• 51.1” (width) × 44.9” (depth) - with Tray 5 
(Bypass) completely extended
• 2,299 mm (width) × 1,140 mm (depth) - with 
Tray 5 (Bypass) completely extended...

Xerox 4590 EPS/4110 EPS User Guide
7-10
7. Specifications
Printable area
The section describes the printable area available.
Standard printing area
The standard area that can be printed leaves a margin of 0.16 
inches (0.161 in./4.1 mm) on all four edges of the paper (for 
SRA3, 12.6 in./320 mm wide, a margin of 0.45 in./11.5 mm left and 
right).
NOTE:The actual printing area may vary depending on the printer 
(plotter) control language.
Extended printing area
If you choose to extend the printing area in...

Xerox 4590 EPS/4110 EPS User Guide
7-11
7. Specifications
List of options
The following are the principal options available. To purchase any 
options, contact the Customer Support Center.
NOTE:The products are liable to change. For the latest 
information, contact the Customer Support Center. Product name Description
High Capacity Feeder 
(HCF)Provides additional paper capacity in trays 6 and 7. A wing 
table to put documents on comes with this product.
Oversized High Capacity 
Feeder (OHCF)1 tray...

Xerox 4590 EPS/4110 EPS User Guide
7-12
7. Specifications
Cautions and limitations
This section describes notes and restrictions on the use of the 
machine.
When the print results differ from the settings
Insufficient memory for the print page buffer may cause the effects 
listed below to occur, giving results not expected from the settings. 
In this case, more memory is recommended.
• Single-sided printing when duplex was specified
• Jobs are canceled (if a page cannot be rendered in the print 
page...

Xerox 4590 EPS/4110 EPS User Guide
7-13
7. Specifications
Simple procedures
This section lists those procedures that are the subject of 
frequently asked questions, particularly in relation to the system 
settings.
Press the buttons in the sequence indicated by arrows.
Note: Many of these settings require the System Administrator to 
perform the procedure. 
Common function settings
Changing the UserID for the System Administrator
Log In/OutJ UserID input J System Settings J System 
Administrator Settings...

Xerox 4590 EPS/4110 EPS User Guide
7-14
7. Specifications
For details, refer to “Print report list” in this guide.
Setting a Report/List to Automatically Print (or Not)
Log In/OutJ UserID input J System Settings J
System Settings J Common Settings J Reports J 
Select report
For details, refer to Reports in the System Administration Guide.
Checking That a Job Has Completed
From the Job Status screen: Job status J Completed Jobs
For details, refer to Checking Completed Jobs in the System 
Administration...

Xerox 4590 EPS/4110 EPS User Guide
8- 1
8. Safety and Notices
Safety notices
This Xerox product and the recommended supplies are designed 
and tested to meet strict safety requirements. These include 
safety agency approval and compliance to established 
environmental standards. Please read the following instructions 
carefully before operating the product, and refer to them as 
needed to ensure the continued safe operation of your product.
KEY POINT:The safety testing and performance of this product...

Xerox 4590 EPS/4110 EPS User Guide
8-2
8. Safety and Notices
WARNING:This product must be connected to a protective earth 
circuit.
• Do not place the machine where people may step or trip on the 
power cord. Do not place objects on the power cord.
• Do not override or disable electrical or mechanical interlocks.
• Do not obstruct the ventilation openings. These openings 
prevent overheating of the machine.
WARNING: Never push objects of any kind into slots or openings 
on this equipment. Making a...

Xerox 4590 EPS/4110 EPS User Guide
8-3
8. Safety and Notices
Laser safety
North America
This product complies with safety standards and is certified as a 
Class 1 Laser product under the Center for Devices and 
Radiological Health (CDRH) of the United States Food and Drug 
Administration (FDA) implemented regulations for laser 
products. This product complies with FDA 21 CFR 1940.10 and 
1040.11 except for deviations pursuant to Laser Notice No. 50, 
dated July 26, 2001. These regulations apply to laser...

Xerox 4590 EPS/4110 EPS User Guide
8-4
8. Safety and Notices
Europe and other markets
This product complies with IEC60825, Laser Safety Products.
The equipment complies with laser product performance 
standards set by governmental, national, and international 
agencies as a Class 1 Laser Product. It does not emit hazardous 
radiation as the beam is totally enclosed during all phases of 
customer operation and maintenance.
CAUTION:Use of controls or adjustments or performance of 
procedures other than...