Xerox Documate 3115 Scanner Docking Station User Guide

Xerox® DocuMate® 3115
User’s Guide61
•Fa x  a n d  Pr i n t  is for sending your scanned documents directly to your printer or fax software. 
•
STI event forwarding is for using another application’s interface for scanning. The OneTouch Event 
Forwarding dialog box opens so you can select which application to use to continue scanning.
Enable scanning to multiple destinations—select this option to allow for multiple destinations to be 
selected, in the destination list, on the OneTouch configuration tab....

Xerox® DocuMate® 3115
User’s Guide 62
•{DD}—inserts the numeric day of the month with a zero added to single-digit days (04).
•
{DDD}—inserts the abbreviated 3-letter day (Mon).
•
{DDDD}—inserts the full name of the day (Monday).
•
{M}—inserts the numeric month without a zero added to single-digit months (8).
•
{MM}—inserts the numeric month with a zero added to single-digit months (08).
•
{MMM}—inserts the abbreviated 3-letter month (Aug).
•
{MMMM}—inserts the full name of the month (August).
•...

Xerox® DocuMate® 3115
User’s Guide63
Scan Configurations
The scan configurations are where you select the scanning resolution, brightness, mode (color, black & 
white, or grayscale), and a number of other settings. To see a selected scan configuration’s settings, 
click its icon. Click the icon again to close the detailed information. 
NOTE: Use Configure Before Scan if you want to set the options manually before scanning. See 
Configure Before Scan on page 76.
Create a new configuration:
• Click the New...

Xerox® DocuMate® 3115
User’s Guide 64
In the Scan Configuration Properties window, the Scan Settings, Page Settings, Advanced Settings, and 
Redaction Settings tabs are always available. When the Visioneer Acuity module is installed, the Acuity 
Settings
 tab will also be available for all destinations. 
Based on the selected destination, additional settings tabs may also be available. If you see one of 
these additional settings tabs please refer to the appropriate section, as listed below, for...

Xerox® DocuMate® 3115
User’s Guide65 Brightness
—sometimes an image is scanned with the brightness and contrast set too light or too dark. 
For example, a note written with a light pencil may need to be scanned darker to improve legibility. 
Increasing or decreasing the brightness makes the scanned image lighter or darker.
Contrast—the difference between the lighter and darker portions of the image. Increasing the contrast 
emphasizes the difference between the lighter and darker portions, decreasing the...

Xerox® DocuMate® 3115
User’s Guide 66
•Reduce Moiré patterns—moiré patterns are wavy, rippled lines that sometimes appear on the 
scanned images of photographs or illustrations, particularly newspaper and magazine 
illustrations. Selecting 
Reduce moiré patterns will limit or eliminate moiré patterns in the scanned 
image. This option is only available when scanning in Color or Grayscale at lower resolutions, and 
when the scanner supports this feature. 
If you are scanning using an Automatic Document...

Xerox® DocuMate® 3115
User’s Guide67
Advanced Settings Tab
Use the Advanced Settings tab to set color correction options for Color or Grayscale scanning. Drag the sliders 
to the left and right to change the color settings. As you do, the image changes to show the effects of 
the new settings.
•
Color saturation—the strength or purity of a color. This option is only available when the selected 
scan mode is Color.
•
Color hue—the color your eyes see as reflected from the image. This option is only...

Xerox® DocuMate® 3115
User’s Guide 68
Please refer to the technical note, at the end of this section, for information about how this setting 
works with other options in the OneTouch Scan Configuration you are modifying. 
Enable redaction—select this option to enable redaction when scanning. You might use this option if 
you want to remove a logo or image that appears on each page that you are scanning. You can choose 
what color to fill in the redacted area in the scanned image, and set multiple areas....

Xerox® DocuMate® 3115
User’s Guide69
Click one time on the default value, 0.00 in each field, to enable the control box for you to input the 
start position and redaction area size. The units of measurement is displayed on the lower-right corner 
next to the Paper size field.
•
From left—input the upper-left corner start position measured from the left-side of the page.
•
From top—input the upper-left corner start position measured from the top of the page. 
•
Width—input the width of the area to be...

Xerox® DocuMate® 3115
User’s Guide 70 Preview
—this color field shows the actual color that will fill the redaction area in the final scanned 
image. When scanning in color, the Preview field will match the Color field. When scanning in 
Grayscale, the preview field will show the gray version of the color you selected, and that color will be in 
the final scanned image. When scanning in Black&White, the preview field will display black or white 
depending on the darkness of the color you selected, and...