Xerox ColorQube 9303 User Manual

Copy Options
ColorQube™ 9301/9302/9303
Copy11
Copy Options
The Copy tab includes basic copying 
selections such as Output Color, Reduce / 
Enlarge, Paper Supply, 2-Sided Copying 
and Copy Output. Each option is described 
in detail below. 
Output Color
The Output Color options include 
selections to automatically detect and 
match the color of your original or produce 
monotone, full color or a single color output from your original. Use More... to access all the options. 
The options are:
•Auto Detect...

Copy Options
ColorQube™ 9301/9302/9303
Copy 12
•Use the - / + buttons on the 
Copy screen to select the required 
reduction or enlargement percentage.
• Alternatively, select the ratio button 
 and use the numeric keypad to 
type in the ratio required.
• Set the ratio window to 100% if you 
want your output image to be the 
same size as your original.
Proportional %
Selections made on this screen will reduce 
or enlarge the image by the same ratio in 
both directions so that the image gets 
bigger or...

Copy Options
ColorQube™ 9301/9302/9303
Copy13
Auto Independent X-Y% automatically fits the image of your original onto the paper you have 
selected. The reduction or enlargement will not be proportional, the device will distort the image 
so that it will fit onto the paper. You must specify a paper tray before using this option.
Auto Center
This option can be selected with either the Proportional or Independent options to position the image 
in the center of the paper selected.
Paper Supply
On the Paper...

Copy Options
ColorQube™ 9301/9302/9303
Copy 14
•2>2 Sided use this option if you want to make two sided copies from two-sided originals. You can 
also select the Rotate Side 2 button to have the second page rotated 180o.
•2>1 Sided this option will make one-sided copies from two-sided originals.
Note If using the document glass to scan originals, the device displays a message when ready to 
scan side 2.
Copy Output
The most commonly used Copy Output options are selected directly from the Copy tab. The...

Copy Options
ColorQube™ 9301/9302/9303
Copy15
• 3 Staples = 8x10” SEF, 8.5x11” SEF, 8.5x5.5” LEF, A4 SEF, A5 LEF, 8.5x14” SEF, B5 SEF.
Note SEF is Short Edge Feed and LEF is Long Edge Feed.
•Use the Original Orientation option to select the orientation of the originals being scanned. Select 
Portrait or Landscape.
•Use the Paper Supply option to select the output media required.
To achieve some of the staple options, the copy paper will need to be loaded in a specific orientation - 
either Long Edge Feed...

Copy Options
ColorQube™ 9301/9302/9303
Copy 16
•Single Fold  the page will be 
folded in half and you can select the 
following options:
•Individually is used to fold each 
page individually.
•Together as a Set is used to fold 
all the pages together to create 
single booklet. 
•Booklet Staple is selected to fold 
and staple the output. This is 
only available with the To g e t h e r  
as a Set option.
•Advanced Settings are used to select additional layout options:
•Originals options allow you to select...

Copy Options
ColorQube™ 9301/9302/9303
Copy17
Finishing Devices
Your device is equipped with one of the following finishing devices:.
Note Thick stacks of paper can be removed from your finisher 
more easily by using the pause function. Press the button as 
shown to lower the stacker tray to a more convenient height. 
Then press the button again to return the stacker tray to normal 
height. Alternatively, it automatically resets after 30 seconds.
High Volume Finisher: The High Volume Finisher 
has a...

Copy Options
ColorQube™ 9301/9302/9303
Copy 18
Convenience Stapler
This optional device is used to manually staple documents. 
Documents can be stapled straight or at an angle. The Convenience 
Stapler can staple between 2 sheets of 64 gsm (18 lb), and 50 sheets 
of 80 gsm (20 lb). The Staple Cartridge holds 5,000 staples.
• To use the Convenience Stapler hold your documents face up and 
slide the corner to be stapled into the stapler.
During stapling the indicator light on the top of the stapler is...

Image Quality
ColorQube™ 9301/9302/9303
Copy19
Image Quality
This section describes how to enhance the 
quality of your output and the options 
available. Options enable you to set the 
the type of original, adjust the lightness, 
darkness, contrast and sharpness of the 
image, and also to customize the settings 
for color output.
Original Type
Use this option to define the type of 
original being copied. Making the correct selection enhances the quality of your output. The options 
are:
Content Type...

Image Quality
ColorQube™ 9301/9302/9303
Copy 20
Image Options
Image Options is used to change the 
appearance of the copy output. The 
options are:
•Lighten / Darken provides manual 
control to adjust the lightness or 
darkness of the scanned images. 
Move the indicator down to darken 
the image or up to lighten the image.
•Sharpness provides manual control to 
adjust the sharpness of the scanned 
images. Move the indicator up to 
sharpen the image. Move the indicator down to soften the scanned image....