Xerox 6279 User Manual

7
Appendix
This chapter contains Xerox 6279 Wide Format diagrams, descriptions, and specifications
about the following:
•Space, Electrical and Environmental Requirements
•Specifications
•Options
•Client Tools
•Cautions and Limitations
Space, Electrical, and Environmental
Requirements
The diagram below illustrates the minimum clearances required for normal operation,
consumables replacement, and maintenance of your Xerox 6279 Wide Format Solution
with FreeFlow Access Print Server. Your Xerox...

The tables below provide space requirements and machine dimensions.
Table 18: Space Requirements
84” (2135mm) clearance from floor to nearest overhead
obstruction within the floor space requirement
Height
140” (3550mm) recommended, 109” (2770mm) minimumWidth
132” (3347mm)Depth
Table 19: Machine Dimensions
55.1” (1400mm) - with UIHeight
61” (1550mm) - with UIWidth
33.3” (847mm) - with ControllerDepth
Table 20: Machine Weight
Ship WeightWeight
659 lb (299 kg)537 lb (244 kg)IOT
15 lb (6.8 kg)13.5 lb (6.1...

Ship WeightWeight
183 lb (83 kg)141.1 lb (63 kg)2 Tray Option
The tables below detail the temperature and humidity requirements, and heat emission
and audible noise details.
Table 21: Environmental Requirements
50 - 89 degrees Farenheit (10 - 32 degrees Celsius)Temperature Range
15 - 85% Relative HumidityHumidity
Table 22: Heat Emission and Audible Noise
UIPrinter Base
None7319 BTU/hr Running
1768 BTU/hr Standby
Heat Emission
None7.5 B (A) Running
6 B (A) Standby
Audible Noise
Specifications
The...

3 minutes (when the room temperature is 72 degrees Farenheit/22
degrees Celsius)
Warm up time
30 seconds (Roll1, E/A0 size)First print out time
External diameter of roll paper (remaining roll paper)
100mm or more: 5mm or less
Less than 100mm: 8mm or less
Cut paper (on Bypass Sheet Feeder): 5mm or less (applied to the
image with coverage specified by ROM pattern)
The width of border erase is 3mm or less on both side edges, lead
edge and trail edge (ignoring variation in paper width and length)
Image loss...

Table 26: Media Types and Weight
NACO WeightEO WeightTypeMedia Source
18-20 lb
90-112 gsm
4 mil
18 lb
60-110 gsm
90-112 gsm
75- 100 µm
Bond
Tracing Paper
Film
T-Bond
Roll
18-20 lb60-110 gsmBondTray
18-20 lb
90-112 gsm
4 mil
18 lb
60-110 gsm
90-112 gsm
75-100 µm
Bond
Tracing Paper
Film
T-Bond
Manual Feed-in Shelf
The table below lists the print speeds for various media, at 7D and 9D/minute.
7-5Xerox® 6279® Wide Format Solution
Printer User Guide
Appendix
Downloaded From ManualsPrinter.com Manuals 

Table 27: Print Speeds
SEL ppmLEL ppmSizeSpeed
NA
9.6
6.9
4.7
3.0
NA
10.0
7.3
4.9
3.1
NA
10.2
7.0
5.0
3.0
15.2
12.6
9.6
6.9
NA
15.5
13.3
10.0
7.3
NA
15.6
12.9
10.2
7.0
NA
US Media Size
Arch A
Arch B
Arch C
Arch D
Arch E
ANSI A
ANSI B
ANSI C
ANSI D
ANSI E
EO Media Size
ISO Sizes
A4
A3
A2
A1
A0
7D/minute
NA
11.4
9.0
6.2
4.8
NA
12.0
9.6
6.6
5.2
NA
12.2
9.2
6.7
4.9
19.4
15.8
11.4
9.0
NA
19.8
16.9
12.0
9.6
NA
20.0
16.0
12.2
9.2
NA
US Media Size
Arch A
Arch B
Arch C
Arch D
Arch E
ANSI A
ANSI B
ANSI C
ANSI D...

Table 29: FreeFlow Accxes Print Server
Memory 2 GB (max 3 GB with optional 1 GB)
Hard Disk Drive 80 GB or better
Internal Integrated Print
Server
USB 2.0 scanner interface
Serial RS232 (service only)
Ports
TCP/IP 10/100/1000; LPRNetwork protocols
HPGL/2 (HP 750C emulation), HP-RTL (HP 750C emulation),
TIFF 6.0 (including LZW), CALS 1&2, CalComp 906/907/951/PCI,
FileNET, NIRS, CGM, VCGL, VRF, Versatec Data Standards, Xerox
Emulation 150. C4, JPEG
Standard Data Formats
Adobe PostScript 3, PDF (1.7). DWF....

Table 30: Power
Frequency (applied to IOT)
50Hz ± 5% or 60Hz ± 5% (compatible with both 50Hz and 60Hz)
Rated Voltage
IOT: AC 208-240V, -10% to +10% of the rated voltage
Power Cord Receptacles
The IOT will have an IEC-320-20C (Inlet)
Power Source
One 208-240V 20A circuit with 1 receptacle is required.
One dual 115V, 15A outlet for Accxes Controller and UI Power is
required.
One each additional 115V, 15A outlet will be needed to enable an
optional Wide Format Scanner or an optional Stacker.
Power
Voltage...

The following tables provide magnification lists (shown in percentages) for prints and
copies.
Table 33: Magnification (%)
A0JIS B1A1JIS B2A2JIS B3A3A4Original Size
xx282.8245200173.2141.4100A4
xx200173.2141.4122.510070.7A3
xx163.3141.4122.510081.661.3JIS B3
200173.2141.4122.510086.670.750A2
141.4122.510086.670.761.35035.3A1
10086.670.761.35043.335.325A0
Table 34: Magnification (%)
ABCDEOriginal Size
2532.45064.7100ANSI E
32.45064.7100129.4ANSI D
5064.7100129.5200ANSI C
64.7100129.4200258.8ANSI B...

Options
The Xerox 6279 Wide Format base printer (product code LXE), at a speed of 7D/minute,
comes equipped with 2 rolls. In addition, the following options are available.
Table 37: Options
Product CodeProduct Name
RTXIOT Output Catch Tray
LXHPrinter 9D Speed Key
LXTScanner (IIT) Upgrade
RTAIIT Document Output Tray
LXDScan Memory 512 MB Upgrade
LXPColor Scan Enablement
LXN6279 Scan Speed
LXRScan to Net
LXKSecond Drawer 2 Roll
LXM2 Cut Sheet Tray (18” - 24” max )
See Specifications for standard and...