Xerox 1632 2240 3535 Color Carrera Manual

6/02
6-87 DC1632/2240
GP 1, GP 4 Intermittent Problem RAP
General Procedures and Information Prelaunch Training/Review
GP 1 Network Printing SimulationDescriptionThis procedure details a method of troubleshooting network printing problems.Procedure[name?? - NextGen PWS Tool release???] includes an LPR Spooler application [Xerox TCP/IP
Port Monitor - name???]. Install/Launch this application [instructions??]
Creating a printer on the PWS
1. Click the Windows Start button
2. Select Settings, then Printers...

6/02
6-88DC1632/2240
GP 4 Intermittent Problem RAP, GP 10 Replacing Bill-
Prelaunch Training/Review General Procedures and Informationï wires chafing against components of the machine, especially against moving com-
ponents
ï misaligned, misadjusted, or incorrectly installed components
ï slow or slipping clutches; slow or binding solenoids
ï damaged components
ï excessive heat, or symptoms of excessive heat, such as the discoloration of a com-
ponent
ï loose cables or wires
9. Perform the adjustments for...

6/02
6-89 DC1632/2240
GP 12  Printing ReportsGeneral Procedures and Information Prelaunch Training/Review
GP 12  Printing ReportsDescriptionThis procedure describes how to print a Configuration Report. Printing Configuration Reports
can help you troubleshoot and configure the Printer.Procedure1. Press the Machine Status button on the  Control Panel. 
2. Select the Billing Meter/Print Report tab on the display.
3. Press the Print Report/List button.
4. Select the Copy Mode Settings button.
5. Select the...

6/02
6-90DC1632/2240
GP 12  Printing Reports
Prelaunch Training/Review General Procedures and Information 

6/02
6-91 DC1632/2240
Space Requirements
General Procedures and Information Prelaunch Training/Review
Space RequirementsSpace requirements are shown in Figure 1 (without Finisher) and Figure 2 (with Finisher).
Figure 1 Space Requirement w/out FinisherFigure 2 Space Requirement w/Finisher
50 mm
2 in.
 50 mm
      2 in.100 mm
      3.9 in.1770 mm
  69.5 in 
in.
425 mm
 16.7 in.
677 mm
  26.7 in. 1705 mm
   67.1 in.401mm
15.8 in.
400 mm
 15.7 in.
2217 mm
  87.3 in.
848 mm
 33.4 in. 100 mm
3.9 in.
50 mm...

6/02
6-92DC1632/2240
Paper Specifications, Product Specs.
Prelaunch Training/Review General Procedures and Information
Paper Specifications Product Specs.
Table 1 Paper Specifications
Specification Paper Trays 1 - 4 Tray 5 (MSI)
Paper Sizes Trays 1 & 2
ï Min: A5 SEF (148 x 210 mm)
ï Max: A3/11 x 17 in.
Trays 3 & 4
ï A4, 8.5 x 11 in., and B5
ï LEF onlyPaper
ï Min: 100 x 140 mm (post-
card)
ï Max: 305 x 483 mm/12 x 19 
in.
Envelopes
ï Min: 98 x 190 mm (Monarch 
7 3/4 size)
Paper Weights Optimum: 24 lb/90...

6/02
6-93 DC1632/2240
Power Requirements, Environmental Data and Re-
General Procedures and Information Prelaunch Training/Review
Power Requirementsï Single phase (two wires plus ground)
ï 110 - 127 VAC/60 Hz (99 - 135 VAC, 55 to 62 Hz)
ï 220 - 240 VAC/50 Hz (198 to 255 VAC, 48.5 to 51.5 Hz)Power Consumption (5 minute average)ï Machine Running: TBD watts (maximum)
ï Standby: TBD watts
ï Power Saver: TBD watts
ï Low Power: TBD watts
Environmental Data and RequirementsAmbient Temperature and Humidity...

6/02
6-94DC1632/2240
Power Requirements, Environmental Data and Re-
Prelaunch Training/Review General Procedures and Information 

6/02
6-95 DC1632/2240
Common Tools, Product Tools and Test Patterns
General Procedures and Information Prelaunch Training/Review
Common Tools Product Tools and Test Patterns
Table 1 Common Tools
Description Part Number
Screw Driver (-) 3 x 50 600T40205 
Screw Driver (+) 6 x 100 600T1989
Screw Driver (+) NO.1 499T356
Stubby Driver (+) (-) 600T40210
Screw Driver (=) 100MM 499T355
Spanner and Wrench 5.5 x 5.5 600T40501
Spanner and Wrench 7x 7 600T40502
Hex Key Set 600T02002
Box Driver 5.5MM 600T1988
Side...

6/02
6-96DC1632/2240
Cleaning Materials, Machine Consumables
Prelaunch Training/Review General Procedures and Information
Cleaning Materials Machine Consumables
Table 1 Cleaning Materials
DescriptionNASG Part 
NumberESG Part 
Number
Cleaning fluid 
(8oz., Formula A)43P48 8R90034
Film remover (8 oz.) 43P45 8R90176
Lens/mirror cleaner 43P81 8R90178
Lint-free (white) cleaning 
cloth19P3025 19P3025
Lint-free Optics cleaning cloth 499T90417 499T90417
Cleaning towels 35P3191 600S4372
Drop cloth 35P1737...