Xerox 1632 2240 3535 Color Carrera Manual

6/02
6-77 DC1632/2240
dC351
General Procedures and Information Prelaunch Training/Review
dC351 NVM Background ProcessingPurposeConsists of 5 subroutines: 
ïMachine Settings - This routine saves the current machine settings  or restores the pre-
viously-saved machine settings. 
ï Manufacturing NVM - This routine automatically loads a region-specific set of values into
NVM.
ïDust Off Reset - This routine sets all HFSI counters  to zero.
NOTE: The following subroutines are intended for...

6/02
6-78DC1632/2240
dC355, dC371
Prelaunch Training/Review General Procedures and Information
dC355 Hard Disk Diagnostic ProgramPurposeNOTE: For details on dC355 Hard Disk Diagnostic Program, see Adjustments: ADJ 9.8. 
dC371 Configuration PagePurposeAllows easy viewing and set-up of machine configuration.Procedure1. Enter the Diagnostic Mode. Refer to Entering Diagnostic Mode using the PWS.
2. Select Adjustments on the Service Entry Screen.
3. Select NVM Init, S/R (the default screen).
4. Select...

6/02
6-79 DC1632/2240
dC612
General Procedures and Information Prelaunch Training/Review
dC612 Color Test Pattern PrintPurposePrints the test patterns in the machine, to help identify Image Quality problems.Procedure1. Enter the Diagnostic Mode. Refer to Entering Diagnostic Mode using the PWS.
2. Select Diagnostics in the Service Entry Screen.
3. Select Test Pattern (dc612).
a. To print a Test Pattern, select Image Process System:
i. Select the Pattern Number from the menu.
ii. Select the Paper Tray....

6/02
6-80DC1632/2240
dC612
Prelaunch Training/Review General Procedures and Information11 Binary/Auto Gradation 
Correction PG (For 
Printer) LUT: C-TRA 
OFF IOT ON(For gradation correction) Gradation pattern for gradation correction for 
printing  LUT: C-TRA OFF IOT ONTo output during Auto Gradation Correction. For checking 
CTRACS feature. The same pattern as this output pattern is even 
output in the CTRACS feature (Reads the output pattern by IIT 
and sets up the color reproducibility) inside the...

6/02
6-81 DC1632/2240
dC612
General Procedures and Information Prelaunch Training/Review22 Binary/Highlight PG 
LUT: C-TRA OFF IOT 
OFF(Highlight gradation check) Gradation pattern for highlight adjustment  LUT: 
C-TRA OFF  IOT OFFIn the gradation reproducibility of Primary color/Secondary color/
Tertiary color, the highlight parts easily varied can be checked in 
details. For checking TRC.IPS
23 Binary/Highlight PG 
LUT: C-TRA OFF IOT 
ON(Highlight gradation check) Gradation pattern for highlight...

6/02
6-82DC1632/2240
dC612
Prelaunch Training/Review General Procedures and Information37 VIPER Fixed Pattern 
Output/BW Binary(For separating troubles) Connection between IPS-Controller CHK Entire 
2dot width Horizontal Ladder Pattern.For development.
Determine the defect locations when IPS defect and ASIC poor 
installation etc. has occurred.IPS
38 VIPER Fixed Pattern 
Output/4C Binary(For separating troubles) Entire 2dot width Horizontal Ladder Pattern. For development.
Determine the defect locations...

6/02
6-83 DC1632/2240
dC685, dC921
General Procedures and Information Prelaunch Training/Review
dC685 Color RegistrationPurposeNOTE: For details on dC685 Color Registration, see Adjustments Section 4: ADJ 9.6. 
dC921 TC/ATC Sensor SetupPurposeNOTE: For details on dC921 TC/ATC Sensor Setup, see Adjustments Section 4: ADJ 9.2.   

6/02
6-84DC1632/2240
dC922, dC924 
Prelaunch Training/Review General Procedures and Information
dC922 TRC ControlPurposeNOTE: For details on dC922 TRC Control, see Adjustments Section 4: ADH 9.3 dC922 TRC
Control Adjustment.
dC924  TRC AdjustPurposeTo manually fine adjust the low/medium/high densities (TRC) for each color.
NOTE: For details on TRC Adjust, see Adjustments Section 4: ADJ 9.5. 

6/02
6-85 DC1632/2240
dC929, dC934
General Procedures and Information Prelaunch Training/Review
dC929 Max SetupPurposeNOTE: For the execution sequence of the Max Setup Functions, see Adjustments Section 4:
ADJ 9.1.
dC934 ADC/AGC SetupPurposeAutomatically adjusts the ADC Sensor Gain. 
NOTE: For details on dC934 ADC/AGC Setup, see Adjustment Section 4: ADJ 9.4.  

6/02
6-86DC1632/2240
dC945, dC956  
Prelaunch Training/Review General Procedures and Information
dC945 IIT CalibrationPurposeFunctional details:
ï Computes and sets the White Reference Correction Coefficient.
ï Corrects the IIT Sensitivity Dispersion.
NOTE: For details on dC945 IIT Calibration, see Adjustments Section 4: ADJ 9.7. 
dC956  Belt Edge Learn Mode PurposeNOTE: For details on dC956 Belt Edge Learn Mode, see Adjustments Section 4: ADJ 9.6.