Xerox 1632 2240 3535 Color Carrera Manual
Here you can view all the pages of manual Xerox 1632 2240 3535 Color Carrera Manual. The Xerox manuals for All in One Printer are available online for free. You can easily download all the documents as PDF.
Page 41
6/02 2-11 DC1632/2240 1-302 Status Indicator RAPs Prelaunch Training/Review 1-302 RAPFront Cover or is openInitial ActionsCheck the operation of the Actuator and the switch.ProcedureOpen the Front Cover. Cheat the Front Cover Interlock Switch. 001-302 is cleared. YN +24VDC is measured between the I/F PWB j531-1 (+) and GND (-). YN +24VDC is measured between the Front Cover Interlock Switch j171-B1 (+) and GND (-). YN 24VDC is measured between the Front Cover Interlock Switch j171-A1 (+) and GND (-). YN...
Page 42
![Page 42
6/02
2-12DC1632/2240
1-303
Prelaunch Training/Review Status Indicator RAPs
1-303 RAPHCF Left Door is open.ProcedureEnter dC330 [001-304] and press Start. Actuate Tray Module LH Cover Interlock Switch with a
screwdriver. Display changes state.
YN
Check voltage between Tray Module PWB j554-3(+) and GND(-). +24 VDC is mea-
sured.
YN
Check the wires from the Tray Module PWB j554-3 to Tray Module L/H Cover Inter-
lock Switch FS813 for damage. If the wires are good, replace Tray Module L/H
Cover Interlock...](http://img.usermanuals.tech/thumb/82/49005/w300_xerox-1632-2240-3535-color-carrera-service-manual-41.png "Page 42
6/02
2-12DC1632/2240
1-303
Prelaunch Training/Review Status Indicator RAPs
1-303 RAPHCF Left Door is open.ProcedureEnter dC330 [001-304] and press Start. Actuate Tray Module LH Cover Interlock Switch with a
screwdriver. Display changes state.
YN
Check voltage between Tray Module PWB j554-3(+) and GND(-). +24 VDC is mea-
sured.
YN
Check the wires from the Tray Module PWB j554-3 to Tray Module L/H Cover Inter-
lock Switch FS813 for damage. If the wires are good, replace Tray Module L/H
Cover Interlock...")
6/02 2-12DC1632/2240 1-303 Prelaunch Training/Review Status Indicator RAPs 1-303 RAPHCF Left Door is open.ProcedureEnter dC330 [001-304] and press Start. Actuate Tray Module LH Cover Interlock Switch with a screwdriver. Display changes state. YN Check voltage between Tray Module PWB j554-3(+) and GND(-). +24 VDC is mea- sured. YN Check the wires from the Tray Module PWB j554-3 to Tray Module L/H Cover Inter- lock Switch FS813 for damage. If the wires are good, replace Tray Module L/H Cover Interlock...
Page 43
![Page 43
6/02
2-13 DC1632/2240
1-306
Status Indicator RAPs Prelaunch Training/Review
1-306 RAPDuplex Door is open.ProcedureEnter dC330 [008-300] and press Start. Open Duplex Transport. Actuate Duplex Cover Inter-
lock Switch with a screwdriver. Display changes state.
YN
Deactuate Duplex Cover Interlock Switch. Check voltage on the Drawer Connector
between j626-A6 (+) and GND(-). +5 VDC is measured.
YN
Check voltage between MCU PWB j406-A9 and GND(-). +5 VDC is measured.
YN
Replace MCU PWB (PL13.1).
Repair the...](http://img.usermanuals.tech/thumb/82/49005/w300_xerox-1632-2240-3535-color-carrera-service-manual-42.png "Page 43
6/02
2-13 DC1632/2240
1-306
Status Indicator RAPs Prelaunch Training/Review
1-306 RAPDuplex Door is open.ProcedureEnter dC330 [008-300] and press Start. Open Duplex Transport. Actuate Duplex Cover Inter-
lock Switch with a screwdriver. Display changes state.
YN
Deactuate Duplex Cover Interlock Switch. Check voltage on the Drawer Connector
between j626-A6 (+) and GND(-). +5 VDC is measured.
YN
Check voltage between MCU PWB j406-A9 and GND(-). +5 VDC is measured.
YN
Replace MCU PWB (PL13.1).
Repair the...")
6/02 2-13 DC1632/2240 1-306 Status Indicator RAPs Prelaunch Training/Review 1-306 RAPDuplex Door is open.ProcedureEnter dC330 [008-300] and press Start. Open Duplex Transport. Actuate Duplex Cover Inter- lock Switch with a screwdriver. Display changes state. YN Deactuate Duplex Cover Interlock Switch. Check voltage on the Drawer Connector between j626-A6 (+) and GND(-). +5 VDC is measured. YN Check voltage between MCU PWB j406-A9 and GND(-). +5 VDC is measured. YN Replace MCU PWB (PL13.1). Repair the...
Page 44
6/02 2-14DC1632/2240 1-306 Prelaunch Training/Review Status Indicator RAPs
Page 45
6/02 2-15 DC1632/2240 3-317 , 3-318 Status Indicator RAPs Prelaunch Training/Review 3-317 IIT Software FailureConfiguration mismatchProcedureChange the position of the document sensor. The problem is corrected. YN Rewrite the NVM values. Return to Service Call Procedures. 3-318 IIT Software FailureProcedureSwitch the power off then on. The problem is corrected. YN Reinstall the software. If the problem continues, check the ESS PWB connectors. If the check is OK, replace the ESS PWB (PL 13.1). Return to...
Page 46
6/02 2-16DC1632/2240 3-319 , 3-320 Prelaunch Training/Review Status Indicator RAPs 3-319 IIT Video Driver FailureProcedureSwitch the power off then on. The problem is corrected. YN Reinstall the software. If the problem continues, check the ESS PWB connectors. If the check is OK, replace the ESS PWB (PL 13.1). Return to Service Call Procedures. 3-320 IIT-ESS Communication Failure 1Controller received check code error.ProcedureSwitch the power off then on. The problem is corrected. YN Reinstall the...
Page 47
6/02 2-17 DC1632/2240 3-321, 3-322 Status Indicator RAPs Prelaunch Training/Review 3-321 IIT-ESS Communication Failure 2Controller received check code error.ProcedureSwitch the power off then on. The problem is corrected. YN Reinstall the software. If the problem continues, check the IIT/IPS PWB connectors. If the check is OK, replace the IIT/IPS PWB (PL 18.3). Return to Service Call Procedures. 3-322 IIT-ESS Communication Failure 3Controller received check code error.ProcedureSwitch the power off then...
Page 48
6/02 2-18DC1632/2240 3-323, 3-324 Prelaunch Training/Review Status Indicator RAPs 3-323 IIT-ESS Communication Failure 4Controller received check code error.ProcedureSwitch the power off then on. The problem is corrected. YN Reinstall the software. If the problem continues, check the IIT/IPS PWB connectors. If the check is OK, replace the IIT/IPS PWB (PL 18.3). Return to Service Call Procedures. 3-324 IIT-ESS Communication Failure 5Controller received check code error.ProcedureSwitch the power off then...
Page 49
6/02 2-19 DC1632/2240 3-325, 3-326 Status Indicator RAPs Prelaunch Training/Review 3-325 IIT-ESS Communication Failure 6Controller received check code error.ProcedureSwitch the power off then on. The problem is corrected. YN Reinstall the software. If the problem continues, check the IIT/IPS PWB connectors. If the check is OK, replace the IIT/IPS PWB (PL 18.3). Return to Service Call Procedures. 3-326 IIT-ESS Communication Failure 7Controller received check code error.ProcedureSwitch the power off then...
Page 50
6/02 2-20DC1632/2240 3-327, 3-328 Prelaunch Training/Review Status Indicator RAPs 3-327 IIT-ESS Communication Failure 8Controller received check code error.ProcedureSwitch the power off then on. The problem is corrected. YN Reinstall the software. If the problem continues, check the IIT/IPS PWB connectors. If the check is OK, replace the IIT/IPS PWB (PL 18.3). Return to Service Call Procedures. 3-328 IIT-ESS Communication Failure 9Controller received check code error.ProcedureSwitch the power off then...