Xerox 1632 2240 3535 Color Carrera Manual

6/02
xix DC1632/2240Introduction Prelaunch Training/Review DANGER: Afin dÈviter des blessures ou des chocs Èlectriques, ne pas effectuer des
activitÈs de maintenance ou de rÈglage avec lÈquipement sur Marche ou avec le cordon
dalimentation branchÈ.
ADJ 5.4  Document Transport  Height
WARNING
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
DANGER: Afin dÈviter des blessures ou des chocs Èlectriques, ne...

6/02
xxDC1632/2240 Prelaunch Training/Review Introduction 

6/02
1-1 DC1632/2240Service Call Procedures Prelaunch Training/Review
1 Service Call Procedures
Service Call Procedures.................................................................................................. 1-3
Initial Actions ................................................................................................................... 1-4
Call Flow ......................................................................................................................... 1-5
Detailed...

6/02
1-2DC1632/2240 Prelaunch Training/Review Service Call Procedures 

6/02
1-3 DC1632/2240
Service Call Procedures
Service Call Procedures Prelaunch Training/Review
Service Call ProceduresService StrategyThe service strategy for the DocuColor 1632/2240 Copier/Printer is to perform any High Fre-
quency Service Item (HFSI) actions before attempting to repair any problems. Some problems
will be corrected by this strategy without the need to diagnose them. The Repair Analysis Pro-
cedures (RAPs) will be used for any remaining problems.
Problems that occur in the Basic Printer...

6/02
1-4DC1632/2240
Initial Actions
Prelaunch Training/Review Service Call Procedures
Initial ActionsPurpose The purpose of the Initial Action section of the Service Call Procedures is to determine the rea-
son for the service call and to identify and organize the actions which must be performed. Procedure1. Gather the information about the service call and the condition of the copier/printer.
a. Question the operator(s). Ask about the location of most recent paper jams. Ask
about the image quality and...

6/02
1-5 DC1632/2240
Call Flow
Service Call Procedures Prelaunch Training/Review
Call FlowThis procedure should be performed at every service call. Initial ActionsAsk the operator about the problem. If the problem appears to be related to operator error, or
an attempt to perform a job outside of the machine specifications, assist the customer in learn-
ing the correct procedure. ProcedureDoes the UI display correctly?
YN
The machine is completely dead (no cooling fans running, no indicator lamps on)
YN...

6/02
1-6DC1632/2240
Detailed Maintenance Activities
Prelaunch Training/Review Service Call Procedures
Detailed Maintenance Activities (HFSI)Procedure1. Clean the ADC Sensor  on every call. 
2. Enter Diagnostics and select dC135. 3. Perform the Service Actions in Table 1 for any High Frequency Service Item (HFSI)
counters that are over threshold or approaching the threshold. Using the customers out-
put volume numbers (high, medium, or low volume), evaluate which HFSI actions should
be accomplished now to...

6/02
1-7 DC1632/2240
Cleaning Procedures, Final Actions
Service Call Procedures Prelaunch Training/Review
Cleaning ProceduresPurposeThe purpose is to provide cleaning procedures to be performed at every call.Procedure
CAUTION
Do not use any solvents unless directed to do so by the Service Manual.
General Cleaning
Use a dry lint free cloth or a lint free cloth moistened with water for all cleaning unless directed
otherwise by the Service Manual. Wipe with a dry lint free cloth if a moistened cloth is...

6/02
1-8DC1632/2240
Cleaning Procedures, Final Actions
Prelaunch Training/Review Service Call Procedures