Xerox 1632 2240 3535 Color Carrera Manual

6/02
2-371 DC1632/2240
116-324, 116-325
Status Indicator RAPs Prelaunch Training/Review
116-324  Exception ErrorCPU exceptional error.ProcedureSwitch power off then on. The problem continues.
YN
Return to Service Call Procedures.
Replace the ESS PWB (PL 13.1).
116-325 Communication Error+24 VDC enabled Communications failure.Procedure+24 VDC power is failed.   Status Code 102-319 is displayed after 116-325 is displayed.
YN
Preliminary information not available.
+24V LVPS is failed.  Perform following:
ï...

6/02
2-372DC1632/2240
116-326, 116-327
Prelaunch Training/Review Status Indicator RAPs
116-326  ESS ROM DIMM #1 FlashA failure was detected in the ESS ROM DIMM #1 Flash.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Pull out and insert the ESS ROM DIMM #1.
If the problem continues, replace the ESS ROM DIMM #1.
116-327  ESS ROM DIMM #2 FlashA failure was detected in the ESS ROM DIMM #2 Flash.ProcedureSwitch power off then on. The problem continues.
YN...

6/02
2-373 DC1632/2240
116-328, 116-329
Status Indicator RAPs Prelaunch Training/Review
116-328  L2 CacheA L2 Cache failure was detected.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Replace the ESS PWB (PL 13.1).
116-329  Serial I/F SoftThe system call error related to the serial I/F was detected.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Again, switch the power off then on. 

6/02
2-374DC1632/2240
116-330, 116-332
Prelaunch Training/Review Status Indicator RAPs
116-330  HD File SystemThe system detected that the an error has occurred or the HD was not formatted during HD
check at power on.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Run the HD Diag (DC355).
If the problem continues, replace the HD (PL 13.1).
If the problem continues, replace the ESS PWB (PL 13.1).
116-332  Invalid Log InfoA failure related to log was...

6/02
2-375 DC1632/2240
116-333, 116-335
Status Indicator RAPs Prelaunch Training/Review
116-333  LocalTalk SoftDue to an error during the software processing, the subsequent processes cannot be per-
formed.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the ESS software.
If the problem continues, replace the ESS PWB (PL 13.1).
116-335  MFIO HDHD failure to be detected by MFIOProcedureSwitch power off then on. The problem...

6/02
2-376DC1632/2240
116-336, 116-337
Prelaunch Training/Review Status Indicator RAPs
116-336  Redirector HDHD failure to be detected by RedirectorProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Set up the HD.
If the problem continues, replace the HD (PL 13.1).
If the problem continues, replace the ESS PWB (PL 13.1).
116-337  Template HD Write Error
An error has occurred when the Job Template was stored in the local HD.ProcedureSwitch power off then on....

6/02
2-377 DC1632/2240
116-340, 116-341
Status Indicator RAPs Prelaunch Training/Review
116-340  Short of MemoryWhen the system detected that the memory was insufficient.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Add memory
Pull out PostScript option.
116-341  ROM DIMMs Mismatchseveral invalid ROM DIMM versions that are installed The combination of the installed ROM
DIMMs is invalid for use at the same time. When installing multiple ROM DIMMs, it is...

6/02
2-378DC1632/2240
116-342, 116-344
Prelaunch Training/Review Status Indicator RAPs
116-342  JT MonitorFatal errors to be detected by the JT monitorProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Replace the ESS PWB (PL 13.1).
116-344  MF IOFatal errors to be detected by MFIOProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Replace the ESS PWB (PL 13.1). 

6/02
2-379 DC1632/2240
116-345, 116-346
Status Indicator RAPs Prelaunch Training/Review
116-345  Token Ring Board Token Ring Control IC Access errorProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Again, switch power off then on. Return to service call procedures.
116-346  FormatterFatal errors to be detected by the Formatter were detected.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Replace the ESS PWB (PL...

6/02
2-380DC1632/2240
116-348, 116-349
Prelaunch Training/Review Status Indicator RAPs
116-348  RedirecterFatal errors to be detected by RedirecterProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Replace the ESS PWB (PL 13.1).
116-349  SIF on Calling Pflite FunctionAn error has occurred when calling the Pflite function with SIF.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Replace the ESS PWB (PL 13.1).