Xerox 1632 2240 3535 Color Carrera Manual

6/02
2-321 DC1632/2240
102-336, 102-337
Status Indicator RAPs Prelaunch Training/Review
102-336  Interface DM - ACD Drv. I/FInterface failure.  Incorrect parameter was detected at the Drv. I/F between the DM and ACD.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Check the D-RAM and ROM. 
If the problem continues, perform re-installation of the software.  
If the problem continues, replace the Control Panel (PL 18.2)
102-337  Frame Data Error with Invalid...

6/02
2-322DC1632/2240
102-338, 102-339
Prelaunch Training/Review Status Indicator RAPs
102-338  Frame Data Error Offset Address Out of ScopeInvalid frame data was detected.  The Offset Address out of range was extracted from the
Frame ID.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Check the D-RAM and ROM. Replace the Control Panel (PL 18.2)
If the problem continues, perform re-installation of the software.
102-339  Display Request Code InvalidText Code...

6/02
2-323 DC1632/2240
102-340, 102-341
Status Indicator RAPs Prelaunch Training/Review
102-340  Interface GUAM - DM I/FInterface failure.  Incorrect parameter was detected at the I/F between the GUAM and DM.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Check the D-RAM and ROM. Replace the Control Panel (PL 18.2)
If the problem continues, perform re-installation of the software.
102-341  Event Queue FullEvent queue fullProcedureSwitch power off then on....

6/02
2-324DC1632/2240
102-342, 102-343
Prelaunch Training/Review Status Indicator RAPs
102-342  Event Queue EmptyEvent queue emptyProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel  (PL 18.2)
102-343  Invalid ClassInvalid classProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the...

6/02
2-325 DC1632/2240
102-344, 102-345
Status Indicator RAPs Prelaunch Training/Review
102-344  Invalid TypeInvalid typeProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel  (PL 18.2)
102-345  Timer Queue FullTimer queue fullProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the...

6/02
2-326DC1632/2240
102-346, 102-347
Prelaunch Training/Review Status Indicator RAPs
102-346  Invalid Timer NumberInvalid timer numberProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
102-347  Undefined TrapUndefined trapProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software....

6/02
2-327 DC1632/2240
102-348, 102-349
Status Indicator RAPs Prelaunch Training/Review
102-348  Command Access ExceptionExceptional command accessProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel  (PL 18.2)
102-349  Invalid CommandIllegal commandProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of...

6/02
2-328DC1632/2240
102-350, 102-351
Prelaunch Training/Review Status Indicator RAPs
102-350  Privilege CommandPrivilege commandProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel  (PL 18.2)
102-351  No FPU Exception Exceptional FPU non-existenceProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of...

6/02
2-329 DC1632/2240
102-352, 102-353
Status Indicator RAPs Prelaunch Training/Review
102-352  Address MisalignAddress mis-alignmentProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel  (PL 18.2)
102-353  Data Access ExceptionExceptional data accessProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of...

6/02
2-330DC1632/2240
102-354, 102-355
Prelaunch Training/Review Status Indicator RAPs
102-354  Tag OverflowTag overflowProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel  (PL 18.2)
102-355  No Co Processor Exception Exceptional Co Processor non-existenceProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Perform...