Vodavi Starplus Sts Key System Installation Manual

Configuration Tables2-3
Chapter 2 - System Specifications
Configuration Tables
The following tables and charts describe system capacities and display the configuration 
flexibility of the system.
System Capacity
Table 2-1: Function Capacity
Item Description
Account Codes
Number of digits per Account Code
Number of Account CodesUp to 12 digits
Unlimited-unverified / 256-verified
Attendants
Digital DSS/BLF ConsolesUp to 3 stations can be designated as attendant(s).
Each DSS/BLF unit requires 1 station port...

2-4Visual Specifications
Chapter 2 - System Specification s
Visual Specifications
CO Line Buttons
UCD Groups
Groups
Members
RAN Announcements
Calls In QueueSoftware supports 8 Groups
16
Eight RAN announcements per system
All CO Lines (28) may be in queue for a UCD Group
Voice Ma il Groups
Groups
Members (ports)
Integration Method
VM Message Wait
VM Disconnect SignalSoftware supports 8 Groups
Software supports up to 24 stations in each Group
In-Band Signaling (DTMF)
[420] to turn on, [421] to turn off...

Visual Specifications2-5
Chapter 2 - System Specifications
DSS/BLF Buttons
Feature/Function Buttons
Table 2-3: Visual Signals - DSS/BLF Buttons
Feature / Function Flash Rate
Off-Hook (busy) ON steady
Incoming Intercom Ring 120 ipm flutter
Call Announce (H or P mode) Steady
Message Waiting Call Back 120 ipm flutter
Station in Do Not Disturb 480 ipm double flash
Camp On (by station) 120 ipm flash
Auto Call Back 120 ipm Flash
Station Unavailable 60 ipm flash
Table 2-4: Visual Signals - Feature / Function...

2-6Tone Specifications
Chapter 2 - System Specification s
Tone Specifications
Audible Signals
The Terminals provide ringing and confidence signals to the user and to calling parties 
according to Ta b l e 2- 5   and Ta b le  2 - 6 .
Table 2-5: Signals To Called Station (Digital Station)
Feature (Indication) Sound In Hz Occurrence (Cadence)
Incoming CO Line (*User Selectable) .8 sec on/2.4 sec off repeated
Intercom Tone Ringing (*User Selectable) .4 sec on/.4 sec off/
.4 sec on/2 sec off repeated
Intercom...

Miscellaneous Specifications2-7
Chapter 2 - System Specifications
Miscellaneous Specifications
Table 2-6: Signals To Calling Station
Feature (Indication)Sound In Hz
Sta                    SLTOccurrence (Cadence)
Intercom Ring Back Tone 1215/1471 440/480 .5 sec on/2.5 sec off; 
repeated
Intercom Call Announce 935 935 .2 sec on/.25 sec off; 
three (3) times
Busy Tone 701 480/620 .5 sec on/.5 sec off; 
repeated
Error Tone 701 480/620 .25 sec on/.25 sec off; 
repeated
Intercom dial Tone 420 440/1350...

2-8Miscellaneous Specifications
Chapter 2 - System Specification s
Table 2-8: Electrical Specifications
Item Specification
Contact Rating (multipurpose contacts) 1 amp, 24 VDC
External Page Port
Output Impedance
Output Power600Ω @ 0 dbm
5 milliwatt max
Music 
Source600Ω input at 2k ohm maximum from 
music source
Power Supply
AC Voltage Input
AC Power
AC Input Fuse
DC Output Voltage105 -129 Volt AC @47-63Hz
300 watts
+5a 250v
+ 30v
Table 2-9: Environmental Specifications
Item Degrees (ºF)
Operating...

System Part Numbers2-9
Chapter 2 - System Specifications
System Part Numbers
The following table may be used to order the STS system parts that are currently available.
Table 2-11: STS Par t Numbers
Description Part Number
STS Basic Key Service Unit (BKSU) 3500-00
STS Expansion Key Service Unit (EKSU) 3502-01
Caller ID Unit (CIDU) 3531-04
Digital Key Telephone Unit (DKTU) - 24 Button 3515-71
Digital Telephone Interface Board (DTIB) (8 port) 3532-00
DSS - 48 Button 3510-71
DTMF Receiver Unit (DTRU4) (4...

2-10System Part Numbers
Chapter 2 - System Specification s 

3
Installation
This chapter provides the basic system installation and wiring instructions for the STS, as well 
as how to install the optional cards and interface units.