Vodavi Starplus Dhs/dhs-e User Guide

24 Features
restricted CO line calls can be made from telephones 
that are normally restricted.
Operation
At the telephone without extended dialing privileges:
1. Press [FEAT ]
2. Dial [5] + [5]
3. Dial your station number.
Basic and Enhanced Telephones
1. Perform the Operation Steps 1-3.
2. Dial your password.
3. You may now dial according to your COS.
Executive Telephones
1. Perform the Operation Steps 1-3.
2.  An Executive Telephone will display:
3. Press [save]
4. Dial your password.
5. Press [save]....

Features 25
Automatic Busy Redial
Description
Automatic Busy Redial (ABR) may be used to redial the 
last number. The system will automatically dials the 
number and then monitors the line for a busy signal. If 
a busy signal is detected, the system ends the call and 
attempts to dial the number again. The redial cycle 
will continue until the maximum number of attempts 
designated in programming is reached.
 Operation
1. Press [FEAT ]
2. Dial [7] + [8]. An Executive Telephone will display:
 
Automatic...

26 Features
Operation 
Basic and Enhanced Telephones
1. Press [FEAT ]
2. Dial [9] + [5]
3. Dial the following codes to select the item you 
want the telephone to access automatically: [0] - 
intercom, [1] - any outgoing line, [2] + [x] - any 
specific line, where x is that line dial [0] (0-9 for 
line 10, [✳] for line 11, [#] for line 12).
Executive Telephones
1. Press [FEAT ]
2. Dial [9] + [5]. The display will show:
3. Press the [chg] button to select between ICM, 
OUTG LN (any outgoing line), CO LN...

Features 27
Background Music
Description
When your telephone is idle and the feature is 
enabled and activated, you can hear background 
music (BGM) through the loudspeaker.
Operation
To enable/disable:
1. Press [FEAT ]
2. Dial [5] + [2] 
Call Back
Description
This feature allows you to queue a station which is 
busy, in Do Not Disturb (DND), or idle. When you send 
a Call Back to a busy station, the Call Back process will 
begin when the busy station hangs up.
Operation
Call the station that you want to...

28 Features
4. Station you are calling is busy.
Basic and Enhanced Telephones
To send a Call Back: 
1. Press [FEAT ]
2. Dial [9] + [1]
To answer a Call Back: 
1. When the Call Back process begins, your 
telephone will ring a special Call Back ring for 30 
seconds. Lift the handset or press [SPKR].
Executive Telephones
To send a Call Back: 
1. Press [cbck]. The display will show either:
or
To answer a Call Back: 
1. When the Call Back process begins your, 
telephone will ring a special Call Back ring for...

Features 29
Press [reply] to continue the Call Back. The display 
will show:
3. If you press [del] in Step 2, the Call Back will be 
canceled and the display will show:
To cancel a Call Back:
1. Press [FEAT ]
2. Dial [✳] + [9] + [1]
Conditions
†The station you are calling must be busy or in the 
Tone Ringing mode. Call Back will be denied when 
there is already a Call Back request at the called 
station. 
Call Forward
Display 
Description
When any type of station call forwarding is invoked, 
the LCD...

30 Features
Station
Description
There are many Call Forward choices: 
†Forward calls when your telephone is idle. 
†Forward calls when your telephone is busy.
†Use the Follow Me feature to receive calls at a 
temporary location and activate the feature 
remotely from another station. 
†Forward your calls when there is no answer.
†Combine busy and no answer call conditions for 
forwarding calls.
†Forward Intercom calls, incoming CO and 
transferred CO calls. 
Use the following programming code...

Features 31
†Call Forward cannot be activated at a telephone 
in Do Not Disturb (DND).
†Only one type of Call Forward can be active at a 
station at any time.
†Call Forward cannot be programmed for more 
than three stations in a series.
Caller Identification
Name/Number Caller ID 
Description
The calling party numbers should be displayed if 
available on incoming caller ID calls, in addition, the 
user may toggle between the number and the name 
while the call is ringing by pressing the  Soft 
Button....

32 Features
2. Press the  Soft Button while the call is 
ringing, and the following display shows:
OR
1. After call is answered, press the  Soft Button 
to toggle between the incoming call number and 
name.
Answered Call Table 
Description
Caller Identification information for up to 200 
answered calls is stored in a system-wide Answered/
Unanswered Call Table. While reviewing the answered 
calls, you will have the option to dial a number, obtain 
more information for a particular call, or delete a...

Features 33
To dial the name/number displayed (long distance 
call):
1. Press [dial].
2. Press [longd]. The number 1 will be dialed 
followed by the telephone number.
To dial the name/number displayed (local call):
1. Press [dial]. 
2. Press [local]. The area code will not be dialed.
Unanswered Call Table
Description
Caller Identification information for 200 unanswered 
calls is stored in a system-wide Unanswered/
Answered Call Table. While reviewing the unanswered 
calls, you will have the option to...