Vodavi Starplus 308ex Electronic Key System Installation Manual

STARPLUS 308EX 
- ISSUE 2 JULY 1, 1987 
c.‘> 
.a 
- 
Jl CONNECTOR 
43 YLGN 
18 GN YL 
----------_ 
YL’BN 
46 MOH 
-- 
(INPUT) 
MOH 
-- 
EPVT 
-- 
(OUTPUT) 
EPVR 
-- 
EPCTL 
-- 
(CONTACT) 
EPCTL 
-- 
ALMT 
-- 
ALMR 
-- 
LBC 1T 
-- 
(CONTACT) 
LBC 1R 
-- 
iI= 
INPUT 
I MAKE CONTROL 
?--J EXTERNAL 
ALARM DEVICE 
LOUD BELL 
CONTROL 1 
/VOLTRGE!- CUSTOMER PROVlDtD CC 
EXTEFGUL CONNECTIONS 
FIGURE 4.3  

STARPLUS 308EX 
ISSUE 2 JULY 1,1987 
500 CUSTOMER DATA BASE PROGRAMfvllNG 
500.1 INTRODUCTiON 
The 308EX Key Telephone system can be 
programmed to meet each customer’s individual 
-- 
! : 1 needs. All programming is done at station number 10 
using the Enhanced Key Telephone as the 
programming instrument. A Basic key telephone 
cannot be used for programming. 
Upon entering the program mode, the key telephone 
no longer operates as a telephone but as a 
programming instrument with all of the buttons...

I 
SVARPLUS 308EX ISSUE 2 JULY 1,1987 
B*Tz.wa&-v 
. 
regardless of attendant assignment, class of service 
or intercom directory number. 
To enter the program mode, the programmer 
must first verify that the keyset is properly connected 
to stztion 10. -- 
- 
Press ON,‘OFF button (LED lights and intercom 
dial tone is heard). 
On the dial pad press the 
l (asterisk) twice. 
On the dial pad enter 5-6-2-3 (LOAD). 
Confirmation tone is heard. Dial tone is removed. 
The HOLD button and the ON,‘OFF button...

STARPLUS 308EX ISSUE2 JULVl,l$$I5? 
Qc.cm- -7 
I i 
-- Fteld Descnptron 
- 
Station Configuration 
Class of Servrce 
DND 
System Speed Dtal Access 
Alarm Door Srgnal 
Preferred Ltne AnsvJer 
Call Forwarding 
Direct DSS CO Select 
Headset 
Paging Access 
Flexrbfe DSS 
CO lhne access 
Page group 
Prckup Group 
CO Line Configuration 
LJne Group 
brie Type 
Srgnallrng 
Toll Overrrde 
Pnva?e Lrne 
CO tine Rrngrng-Day 
CO Lrne Rrngrng-Nrght 
Fiash Timer 
CO Ring Defect 
Dral Pulse 
System Configuration 
CO...

ISSUE 2 JULY 1, 1987 
500.6 STATION CLASS OF SEl?vlCE 
(Data Field 01) 
Press DSS button of station to be assigned COS. 
Press CO line button of class desired (LED is lit): 
Class 1 =CO linet-- 
Class 2 =CO line 2 - 
Class 3=CO line 3 
Class 4=CO line 4 
Class 5=CO line 5 
Class 6=CO line 6 
Press HOLD button. 
500.7 STATION DATA (Da!a Field 03) 
bress DSS button for station to be programmed. 
;To change a feature, press appropriate CO line 
jbutton so LED lights up or extinguishes. 
) CO 1 =do not...

STARPLUS 308EX ISSUE 2 JULY 1,1987 
-=a 
STATION DATA (Data Field 03) 
Press DSS 
button for station to be programmed. 
To change a feature press appropriate CO line 
--I 
button so LED lights up or extinguishes. 
CO 1 - headset 
CO 
2 - page access 
Press HOLD button. 
500.8 DSS ASSIGNMENTS (Data Field 04) 
Press DSS button of station to be moved. 
Press DSS button of location it’s being moved to. 
(A beep tone will be heard.) 
Make all entries for all stations being moved. 
Then press HOLD button. 
If...

STARPLUS 308EX ISSUE 2 JULY I,1987 
500.10 PAGING GROUPS (Data Field 06) 
Press DSS button of station to be programmed. 
Press CO lines to indicate paging groups: 
-CO 1 -group l-- 
CO 2-group 2 - 
Press HOLD button. 
Next DSS button will light for programming. 
PlCKUP GROUPS 
(Data Field 07) 
Press DSS button of station to be programmed. 
P?e?ss CO lines to indicate pickup groups: 
CO 1 -group 1 
CO 2 - group 2 
Press HOLD button. 
Next DSS button will light automatically for 
programming of next...

STARPLUS 308EX 
ISSUE 2 JULY 1, I!%$7 
500.12 CO LINE PROGRAMMlNG 
(Data Field 12) I 
r 
.- 
STA LED’s willBe-lit indicating current programming. 
To change a featwe, press appropriate STA button CO Line Type 
so the LED lights or extinguishes. If a line is to be a CO line, the LED should be lit. 
STA 10 - CO line type If the line is to be a PBX line, it should be 
STA 1 1 - signalling extinguished. When a line is marked PBX, a 2 digjt 
STA 12 - toll restriction override dialing code may be used (Data...

SfARPLUS 308EX iSSUE 2 JULY I,1987 
--ua%Q - 
a 
1 Station Rssignmsnl_ 
-,Program 
Baay !3ewice 
Activity 
I 
Dath-I Assignment 
Pro-zpm 
-L 
” .ight Service 
,Marked Might 
hinging) Activity 
-.-+-A 
- 
1 
i 
TABLE 5-2 
ACCESS AND RlNGlKi - DAY 
_dccess & Ring Access & No Access & :: No Access & 
- No Ring Ring No Wing 
Outdialing Outdialing No Outdialing No Outdialing 
Incoming LEDs Incoming LEDs Incoming LEDs No Incoming LED 
Flash Flash Flash Flash 
incoming Ring No Incoming Ring Incoming Ring No...

500.14 CO LINE RINGIidG - MGHT 
(Data Field 14) 
Press CO linetobe programmed. 
DSS buttons which are lit indicate which statlons will 
ring on that line. To change assignments, press DSS 
buttons so they either light up (stations will ring) or 
extinguish (stations will not ring). 
Press HOLD. 
500.15 FLASH TIMER (Dak Field 15) 
Press CO line button for which the timer will work. 
Enter 2 digit timer value on the dial pad (01-99 
which corresponds to 0.1 to 9.9 seconds). 
Press HOLD button. 
‘.y 
L J...