Vivitek Qumi Q6 User Manual

55
Advanced 2
To adjust the advanced settings, press  to enter the Advanced 2 sub menu.
ItemDescription
Test PatternPress the ◄ or ► button to select different test pattern.
H Image ShiftPress the ◄ or ► button to shift the horizontal position.
V Image ShiftPress the ◄ or ► button to shift the vertical position.  

56
Settings 2 Menu
To access the Settings 2 menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Settings 2 menu.
3. Press the ▲ or ▼ button to move the cursor up and down in the Settings 2 menu 
and press .
4. Press the ◄ or ► button to change values for each applicable setting.
ItemDescription
Auto SourcePress the ◄ or ► button to enable or disable automatic source 
detection.
No Signal Power Off 
(min)
Press the ◄ or ► button to...

57
Reset All
To reset all of the menu items to the factory default values (except Language and Security 
Lock), perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Settings 2 menu.
3. Press the ▲ or ▼ button to select the Reset All menu and press .  

58
Status
To see the status of the Qumi, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Settings 2 menu.
3. Press the ▲ or ▼ button to select the Status menu and press .
ItemDescription
Active SourceDisplays the activated source.
Video InformationDisplays resolution/video information for RGB source and color 
standard for Video source.
LED Hours (Eco, 
Normal)
LED use information is displayed (in hours). Eco and Normal 
counters are separated.
Software...

59
Advanced 1
To access the Advanced 1 menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Settings 2 menu.
3. Press the ▲ or ▼ button to select the Advanced 1 menu and press .
4. Press the ▲ or ▼ button to move the cursor up or down in the Advanced 1 menu.
5. Press the ◄ or ► button to change values for each applicable setting.
ItemDescription
Menu PositionPress the ◄ or ► button to select different OSD location.
Translucent...

60
Advanced 2
To access the Advanced 2 menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Settings 2 menu.
3. Press the ▲ or ▼ button to select the Advanced 2 menu and press  or ►.
4. Press the ▲ or ▼ button to move the cursor up or down in the Advanced 2 menu.
5. Press the ◄ or ► button to change values for each applicable setting.
ItemDescription
Sleep TimerPress the ◄ or ► button to adjust the time for automatically lamp 
off (in...

61
Source Filter
To adjust the source filter, press  or ► to enter the Source Filter sub menu.
ItemDescription
HDMI 1 / MHLPress the ◄ or ► button to enable or disable HDMI 1 / MHL 
source in auto search loop.
HDMI 2Press the ◄ or ► button to enable or disable HDMI 2 source in 
auto search loop.
USBPress the ◄ or ► button to enable or disable USB source in auto 
search loop.  

62
Chapter 5  Taking Care of Your Qumi
Cleaning the Qumi
Cleaning the Qumi to remove dust and grime will help provide trouble-free operation.
Warning: 
1. The Qumi should be turned off and unplugged before cleaning. Failure to\
 do so may 
result in injury or damage to the system. 
2. Use only a dampened cloth when cleaning. Do not allow water to enter th\
e ventilation 
openings on the Qumi.  
3. If a small amount of water gets into the interior of the Qumi while cle\
aning, unplug the 
Qumi and set in...

63
Troubleshooting
Common Problems and Solutions
These guidelines provide tips to deal with problems you may encounter while using the 
Qumi. If the problem remains unresolved, contact your dealer for assistance.
The problem sometimes can be as simple as a wire that is not completely connected.
Review the following possible issues before proceeding to the problem-specific solutions.
• Use another electrical device to confirm that the electrical outlet is properly working.
• Make sure that the Qumi is...

64
Image Problems
Problem: No image appears on the screen
1. Verify that the settings on your personal computer are properly configured.
2. Turn off all of the equipment and power up the equipment again in the correct o\
rder.
Problem: The image is blurred
1. Adjust the Focus on the Qumi.
2. Make sure the Qumi-to-screen distance is within the specified range.
3. Clean the Qumi lens with optical lens cleaning cloth if it is dirty.
Problem: The image is wider at the top or bottom (trapezoid effect)
1....