Vivitek Qumi Q6 User Manual

35
9. In EZCast Pro menu, tap Setting.
10. In the Setting menu, use your smart device or the remote to select Internet. 
11. Tap  or press on the remote to continue.  

36
12. Press the ▲ or ▼ on the remote or smart device to select a listed SSID and press 
.
 
13. Once the SSID is selected, a password prompt displays. Enter the correlating 
password if required. Tap or click OK to enter. Tap or click Cancel to stop the 
process. Click Forget to remove the selected WiFi profile.
Note: 
After setting up the wireless connection, you may need to reconnect Qumi\
 and your 
device.
Router Setup Mode
In this configuration, both the Qumi and device are connected to a local...

37
3. Turn on the WiFi function on your device.
4. In the network settings, select the SSID for your WiFi setup.
5. When prompted, enter the password to the selected SSID.
6. Both the Qumi and your smart device are now connected to the same network 
router, see the following image.
7. On the device, tap the EZCast Pro application to open.
Note: 
The device must be networked to the Qumi prior to opening the EZCast Pro\
 application.
8. Tap EZCast Pro to display the EZCast Pro menu. If the no other menu...

38
EZCast Pro Overview
The EZCast Pro application provides remote function control for the Qumi\
. EZCast Pro 
and EZCast Off Line versions are available.
Note: 
The screen shot is only for reference. 
Listed function names are for reference only and may differ from actual sample use.
                     
                                      iOS                               \
                          Android
IconFunctionDescription
Photo
Select to display available image files (camera roll or...

39
IconFunctionDescription
Document
Select to display specific documents. Easy commenting is 
available. Modified documents are stored in the camera roll 
as images.
Support Microsoft® Office, PDF and Apple’s iWorks. Sync 
the documents files to your device before using.
WebSelect to display the built-in browser application. 
CloudS
Cloud Storage
Select to open a cloud provider in order to select and 
download an available file.
Note:  
Cloud provider application must be installed and appropriate...

40
IconFunctionDescription
EZMirror
Tap to switch to EZMirror mode. Once enabled, this mode 
displays the contents of your smart device directly onto the 
projected screen. 
Once you turn it on, there is a 60 second countdown to 
allow your mobile phone to connect with the Qumi. Select 
your Miracast function in your device setting page.
Note: 
EZMirror is only available for Android devices.
Mirror
Click to switch to Mirror mode. Once enabled, this mode 
displays the contents of your desktop directly...

41
DLNA DMR
Digital home entertainment is now easy to stream around the house without hassles 
through the EZCast Pro function on your projector.
DLNA is a standard that enables devices to share photos, video, and music with each 
other and your DLNA compliant projector. Through any DLNA streaming App you can 
easily push multimedia content to the EZCast Pro interface anywhere within your home 
network. 
By selecting a DLNA streaming app you can create a bridge between your various devices 
--Windows or...

42
5. The Change homegroup settings window displays. Under Share menu with devices 
drop-down menu, click Stream my pictures, music, and videos to all devices on my home 
network to enable the option. 
6. Once enabled, select Choose media streaming options...
7. The Choose media streaming options for computer and devices window displays. Find the  
Show devices on: option and click the drop-down menu to select Local Network. A list of 
available devices displays.
8. Select the DLNA compatible projector...

43
Chapter 4  On-Screen Display (OSD) Settings
OSD Menu Controls
The Qumi has an On-Screen Display (OSD) settings menu that allows you to make 
adjustments and changes to settings, such as display settings and audio settings. There 
are 3 menus within the OSD menu:
• Image – Various aspects of the image quality can be adjusted in this menu.
• Setting 1 – Default language and other settings can be adjusted in this menu.
• Setting 2 – Auto source and other settings can be adjusted in this menu.
If the...

44
Setting the OSD Language
The language that is displayed in the OSD can be changed. To change the language in 
the OSD, perform the following steps: 
1. Enter the OSD menu. Press the ◄ or ► button to select the Setting 1 and press .
2. Press the ▲ or ▼ button to move to the Advanced 1 menu.
3. Press  to enter the Advanced 1 sub menu.
4. Press the ▲ or ▼ button until the cursor highlights the Language setting and  
press .
5. Press the ◄ or ► button until the language you want is shown in the cursor.
6....