Vivitek Projector Qumi Q2 User Manual

							25
Advanced Feature
To access the Advanced menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Image menu.
3. Press the ▼ or ▲ button to move to the Advanced menu and then press .
4. Press the ▼ or ▲ button to move the cursor up or down in the Advanced menu.
ITEMDESCRIPTION
Color Space Press the ◄ or ► button to adjust the color space.
Color Temperature Press the ◄ or ► button to adjust the color temperature.  
						

							26
Computer Menu
To access the Computer menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Computer menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Computer menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
Horizontal PositionPress the ◄ or ► button to adjust the display position to left or 
right. 
Vertical PositionPress the ◄ or ► button to adjust the display position to up or 
down. 
FrequencyPress the ◄ or ► button to adjust the A/D sampling clock.
TrackingPress the ◄ or ► button to adjust the A/D sampling dot.
Auto ImagePress  to automatically adjustment for phase, tracking, size 
and position.
Note: 
Items in the Computer menu can only be modified when the Qumi is connected to 
a PC through a VGA cable. Settings that are not enabled or that cannot be modified 
are gray in color.  
						

							27
Video/Audio Menu
To access the Video/Audio menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Video/Audio menu.
3. Press the ▲ or ▼ button to move the cursor up and down in the Video/Audio menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
Video AGCPress the ◄ or ► button to enable or disable the Automatic Gain 
Control for video source.
Video SaturationPress the ◄ or ► button to adjust the video saturation.
Video TintPress the ◄ or ► button to adjust the video tint/hue.
Video OverscanPress the ◄ or ► button to enable or disable video over scan.
Closed CaptioningPress the ◄ or ► button to enable or disable Closed Captioning.
AudioPress  to enter the Audio menu. See Audio on page 28.
ResetPress  to reset all settings to default values.
Note: 
Video AGC, Video Saturation, Video Tint and Closed Caption settings are 
adjustable only when the source is from composite video. The Video Overscan 
settings are adjustable only when the source is from composite, componen\
t and 
HDMI video.  
						

							28
Audio
To adjust the audio settings, press  to enter the Audio sub menu.
ITEMDESCRIPTION
VolumePress the ◄ or ► button to adjust the audio volume. 
MutePress the ◄ or ► button to turn on or off the speaker.
Audio InputPress the ◄ or ► button to select audio input.   
						

							29
Installation I Menu 
To access the Installation I menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Installation I menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Installation I menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
LanguagePress the ◄ or ► button to select a different localization menu.
Blank ScreenPress the ◄ or ► button to select different color to blank the 
screen.
ProjectionPress the ◄ or ► button to choose from four projection methods: 
Front, Rear, Ceiling-Front, Ceiling-Rear.
Aspect RatioPress the ◄ or ► button to adjust the video aspect ratio.
KeystonePress the ◄ or ► button to adjust the display keystone.
Digital ZoomPress the ◄ or ► button to adjust the Digital Zoom menu.
AdvancedPress  to enter the Advanced menu. See Advanced on page 
30.
ResetPress  to reset all settings to default values  
(expect Language and Security Lock).  
						

							30
Advanced
To adjust the advanced settings, press  to enter the Advanced sub menu.
ITEMDESCRIPTION
Security LockPress the ◄ or ► button to enable or disable security lock 
function.
Keypad LockPress the ◄ or ► button to enable or disable keypad lock 
function.
Presentation TimerPress  to enter the Presentation menu.
Presentation Timer
To adjust the presentation timer settings, press  to enter the Presentation Timer sub 
menu.
ITEMDESCRIPTION
TimerPress the ◄ or ► button to enable or disable presentation timer 
function.
Timer PeriodPress the ◄ or ► button to adjust the display timer period.
Timer ResetPress  to reset presentation timer counter.  
						

							31
Installation II Menu 
To access the Installation II menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Installation II menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
ITEMDESCRIPTION
Auto SourcePress the ◄ or ► button to enable or disable automatic source 
detection.
LED ModePress the ◄ or ► button to select the LED mode for higher 
brightness or lower brightness to save LED life.
AdvancedPress  to enter the Advanced menu. See Advanced Feature 
on page 32.
Factory ResetPress  to reset all items to factory preset values.
StatusPress  to enter the Status menu. See page 35 for more 
information on Status.  
						

							32
Advanced Feature
To access the  Advanced menu and adjust the settings, perform the following steps:
1.   
Enter the OSD menu.
2.   
Press the ◄ or ► button to select the  Installation II menu.
3.   
Press the ▲ or ▼ button to select the  Advanced menu and then press 
.
4.   
Press the ▲ or ▼ button to move the cursor up or down in the Advanced menu.
5.   
Press the ◄ or ► button to change values for each applicable setting.
ITEM DESCRIPTION
OSD Menu SettingPress  to enter the OSD setting menu. See page 33 for 
more information on OSD Menu Setting.
Peripheral  T est Press 
 to enter the Peripheral
 T est menu. See page 33  for 
more information on Peripheral  T est.
3D Press 
 to enter the 3D menu. See 3D on page 34.
Note: 
3D functionality works when the input source supports 120Hz. 
						

							33
OSD Menu Setting
ITEMDESCRIPTION
Menu PositionPress the ◄ or ► button to select different OSD location.
Translucent MenuPress the ◄ or ► button to select OSD background translucent 
level.
Menu DisplayPress the ◄ or ► button to select OSD timeout delay.
Peripheral Test
ITEMDESCRIPTION
Remote Control  
TestPress  to test the IR remote controller for diagnostic.
Color TestPress  to select different colors on screen.
Button TestPress  to test the button on keypad.  
						

							34
3D
ITEMDESCRIPTION
3DPress the ◄ or ► to select Off, DLP-Link or IR.
3D Sync InvertPress the ◄ or ► to turn 3D Sync Invert On or Off.
Factory Reset
To reset all of the menu items to the factory default values (except Lan\
guage and Security 
Lock), perform the following steps:
1. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
2. Select the Factory Reset sub menu.
3. Press .