Vivitek Projector Qumi Q2 User Manual

							5
Chapter 2  Getting Started
What You Need
Many types of external devices and peripherals can be connected to the Q\
umi. External 
or portable music players can be connected to play music. DVD, VCD and V\
HS players 
can be connected to play movies. Camcorders and digital cameras can also\
 be used to 
play videos and display photos. Computers, as well as peripherals such a\
s MicroSD 
cards and USB flash drives, can be connected to the Qumi to display docu\
ments and 
other types of content.
These devices can be connected to the Qumi by using an appropriate cable\
. Make sure
that the connecting device has an appropriate output connecto r. 
W arning:  
As a safety precaution, disconnect all power to the Qumi and co nnecting devices before making 
connections.
Connect  AC power adapter
Connect audio
Connect video or 
Apple® devices
Insert USB device Insert microSD card
Connect HDMI 
peripherals Connect personal 
c
o m puters  or A ppl e® de vice s 
						

							6
Setting Up Qumi
Connecting Apple  Devices
Connect an  Apple device to the Qumi by using the following:
Apple Digital AV Adapter (Optional)
 
NOTE: 
Connectors for Apple products sold separately.
Connecting HDMI Video Devices
Connect HDMI-compatible video devices to the Qumi using the mini to standard HDMI cable.  
Connecting Portable Devices
Connect portable video devices to the Qumi using the mini to mini HDMI cable.
Mini HDMI to Standard HDMI Cable
Apple Digital AV Adapter(Sold Separatelly)
Universal I/O to VGA Cable
Apple VGA Adapter(Sold Separately)
Apple VGA Adapter (Optional) 
						

							7
Inserting a microSD Card or USB Drive
Connect a USB drive or microSD card to the Qumi by inserting the storage\
 device(s) into 
the appropriate port.
Connecting PC/Notebooks
Connect a PC/notebook to the Qumi by using the Universal I/O to VGA cabl\
e.
Note: 
The PC/notebook must have a VGA output port to use the universal I/O to VGA 
cable to connect to the Qumi.
PC/Notebook
Connecting  Non-HDMI Video Devices
Connect non-HDMI video devices to the Qumi by using the Qumi AV cable.
Note: 
Qumi AV cable sold separately. 
						

							8
Connecting Audio
Connect earphones or mini speakers to the Qumi by inserting into the Audio Out port.
Starting and Shutting down the Qumi
1�
 
Connect the AC power adapter to 
the Qumi. Connect the other end 
of the AC power adapter to a wall 
outlet.
Note: 
Adapter models may vary 
between regions.
2�
 
Then slide the  POWER switch 
to turn on the Qumi.
 
The Qumi splash screen displays 
and connected devices are 
detected.
 
See Setting an Access Password 
(Security Lock) on page 10 if 
security lock is enabled.  
						

							9
3.
 
If more than one input device is 
connected, press the SOURCE 
button on the remote control and 
use the ▲ or ▼ buttons to select 
the applicable device or press ▲ 
and ▼ or ◄ and ► at the same 
time on the keypad on the Qumi.
• VGA:  Analog RGB
•  Component: DVD input  YCbCr / 
YPbPr , or HDTV input  YPbPr
•  Composite  Video:  Traditional 
composite video
•  HDMI: HDMI / DVI
•  USB: microSD card / USB disc
4.
 
Slide the 
 POWER switch to 
turn of f the Qumi. 
Adjusting the Image
If the projected image is not in focus, the image 
can be adjusted by moving the focus ring up or 
down until  the image is focused. 
						

							10
Setting an Access Password (Security Lock)
To prevent unauthorized use of the Qumi, you can create a password. When the access 
password function is enabled, the password must be entered after the Qumi has been 
turned on. 
Creating a password can be done by performing the following steps:
1�
 
Press the MENU button on the 
remote control or press MENU and 
 on the keypad simultaneously 
to open the On-Screen Display 
(OSD) menu.
2�
 
Move the cursor to the Installation 
I tab and scroll down to select 
Advanced.
3�
 
Press the ▲ or ▼ button to select 
Security Lock.
4�
 
Press the ◄ or ► button to 
enable or disable the security lock 
function.
A password dialog box 
automatically appears.
5�
 
You can use the ▲▼◄► buttons 
located either on top of the Qumi 
or on the remote control to enter 
the password.  Any combination 
of the navigation buttons can be 
used (five must be chosen).
Press the navigation buttons in 
any order to set the password. 
Then press the MENU button to 
exit the dialog box.  
						

							11
6.
 
appears when you power on the 
Qumi when the Security Lock is 
enabled. 
Enter the password that was 
created in step 5. 
Important: 
Keep the password in a safe place.  Without the password, you will not be able to 
use the Qumi. If you lose the password, contact your reseller for information on 
resetting the password.
Using a T ripod
The Qumi can be used with a tripod by connecting 
the tripod to the bottom of the Qumi. Many typical 
tripods can be connected.
• Type: Mini tripod
•  Thread size: 1/4 - 20 
						

							12
Setting Up the Remote
The remote control comes with one (1) 3V lithium 
battery (CR2025). The battery is pre-installed in the 
remote control.
T o begin using the remote control, remove the plastic 
tab (A) from the battery compartment.
Replacing the Remote Control Batteries
1.
 
Remove the battery 
compartment cover 
by sliding the cover 
towards the arrow  (A). 
Then pull out the cover 
towards the arrow  (B).
2.
 
Remove the old battery 
and insert the new 
battery with the positive 
side facing up.
3.
 
Install the cover.
Caution: 
1. Only use a 3V lithium battery (CR2025).  
2. Dispose of used batteries according to local ordinance regulations.  
3. Remove the battery when not using the Qumi for prolonged periods.
Operating Range
The remote control uses infrared (IR) transmission to control the Qumi\
. It is not necessary 
to point the remote directly at the Qumi.
The remote control functions properly within a radius of approximately 2\
3 feet (7 meters)
and 15 degrees above or below the Qumi level (if the remote is not held\
 perpendicular to 
the sides or rear of the Qumi).
If the Qumi is unresponsive to the remote control, move closer towards t\
he Qumi. 
						

							13
Chapter 3  Qumi Media Suite
Overview
microSD card or USB drive. Music, movies, pictures and documents can be \
displayed. 
The media suite menu contains five (5) applications that can be access\
ed:• Movie –  An easy to use movie player that displays multiple movie formats.
•  Photo – A  photo viewer that contains slide show functionalit y.
Music – A music player that supports many types of audio files.
Office viewer – A document viewer that displays documents.
• 
• 
• 
Settings –  The settings of the Qumi can be adjusted in this menu. 
						

							14
Movies
Supported Formats
The following video formats are supported:• 
AAC-LC 
• MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels at 30 frames per second; \
Simple 
• Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per \
second, 
W atching  Y our Movie
To open a list of movies, perform the following:
1.  Press the ◄ or ► key to select the Movie icon in the media suite menu.
2.  Press 
3. 
4. Press 
While a movie is playing, the control interface can be hidden.  T o hide the control interface, 
press the ▲ key . Press the ▲ key again to show the control interface.
The control interface will automatically disappear if there is no user i\
nput for five (5) seconds.
Control Interface
The following playback functions are controlled by the remote control, which are shown in 
the table below:
ACTION DESCRIPTION
Pause/Resume Press 
 to pause or resume a movie
Forward speed Press the ◄ or ► key to change the speed (2X, 4X, 8X, 
16X, 32X)