Vivitek Projector Qumi Q2 User Manual

ii
Preface
Copyright
©2011 Vivitek Corporation.   is a trademark of Vivitek Corporation.  Other 
trademarks are the properties of their respective owners.  Values, weights and dimensions 
are approximate.  Specifications are subject to change without prior notice.
Disclaimer
The information in this document is subject to change without notice. The manufacturer 
makes no representations or warranties with respect to the contents hereof and specifically 
disclaims any implied warranties of merchantability...

iii
Important Safety Information
Important: 
It is strongly recommended that you read this section carefully before using the 
Qumi. These safety and usage instructions will ensure that you enjoy the Qumi.
Keep this manual for future reference.
Symbols Used
Warning symbols that are used on the projector and in this manual are to alert you of potential 
hazardous situations.
The following styles are used in this manual to alert you to important i\
nformation.
Note: 
Provides additional information on the...

iv
Qumi Installation Notice
•  
Allow at least a 20-inch (50cm) clearance around the exhaust vent.
• Make sure that the intake vents do not recycle hot air from the exhaust \
vent.
•  When operating the Qumi in an enclosed space, make sure that the surroun\
ding air 
temperature within the enclosure does not exceed operating temperature w\
hile the 
Qumi is running, and the air intake and exhaust vents are unobstructed.
• 
does not recycle exhaust ai r, as this may cause the device to shutdown even if...

v
Power Safety
• Only use the supplied adapte r.
•  Do not place anything on the cord. Place the cord where it will not be i\
n the way of 
foot traffic.
•  Remove the battery from the remote control when storing or not in use fo\
r a pro -
longed period.
Cleaning the Qumi
•  Unplug the cord before cleaning. See  Cleaning the Qumi on page 36.
Note: 
The Qumi will be warm after usage.  Allow the Qumi to cool down before storing.
Regulatory  Warnings
Before installing and using the Qumi, read the...

vi
Table of Contents
Preface ���������������������������������������������������������������������������������������������������������������������ii
Chapter 1  At a Glance ������������������������������������������������������������1
Overview ������������������������������������������������������������������������������������������������������������������1
Accessories �������������������������������������������������������������������������������������������������������������3
Remote Control...

1
Chapter 1  At a Glance
Overview
Front/Top/Right V iew
Keypad
Menu
Open and exit the OSD 
buttons
Up Cursor
Navigate and change settings in the OSD
Left Cursor
Navigate and change settings in the OSD
Enter Cursor
Change settings in the OSD
Right Cursor
Navigate and change 
settings in the OSD
Down Cursor
Navigate and change 
settings in the OSD
Keypad
See Keypad - On-Screen 
Display (OSD) buttons
Cooling Vent
Do not cover
Focus Ring
Focus the projected image
Lens
Projection Lens
Cooling Vent
Do not cover 

2
Rear/Top/Left V iew
Bottom V iew
Power Switch
Turn on/of f the Qumi
UNIVERSAL I/O
Connect a RGB or component 
cable from a device
MINI HDMI
Connect a MINI HDMI cable 
from a HDMI device
DC IN
Connect the supplied power 
adapter
AUDIO OUT
Connect an audio cable to 
speakers or headphones
AV IN
Connect the  AV IN cable 
from a video device
USB
Connect an USB drive or  device
microSD
Insert a microSD card
IR Receiver
Receive IR signal from the 
remote control
Cooling Vent
Do not cover
Rubber Foot Pad...

3
Accessories
Along with the Qumi, the following accessories are included: 
Remote Control 
(With one 3V CR2025 battery)
Mini to Standard HDMI Cable
Mini to Mini HDMI Cable
Universal I/O to VGA Cable
Regional Power Cord  and Power  Adapter
Documentation Kit 
(Quick Start Guide, Warranty Card)
Carrying Case
Cable Cores (x2)*
Contact your dealer immediately if any items are missing, appear damaged\
, or if the unit does 
not work. It is recommended that you keep the original packing material \
should you...

4
Remote Control
 
Important: 
1. Be sure nothing obstructs the path between the remote control and the Qumi. 
If the path between the remote control and the Qumi is obstructed, the signal can 
 
2. The buttons and keys on the Qumi have the same layout and similar functions as 
the corresponding buttons on the remote control. This user ’s manual describes the 
functions based on the remote control.
Qumi and Remote Control Buttons
The Qumi can be used with the remote control or the keypad that is locat\...