Vivitek Projector Qumi Q2 User Manual

							15
Photos
Supported Formats
• BMP  (up to 4000 x 3000 pixels)
•  PNG (up to 4000 x 3000 pixels)
•  JPG (up to 4000 x 3000 pixels)
Viewing  Y our Photo
When a USB flash drive and/or a microSD card is inserted, the storage ca\
rd folder icon 
To open a photo in photo viewe r, perform the following:
1.  Press the ◄ or ► key to select the Photo icon in the media suite menu.
2.  Press 
3. Select the folder containing the desired photo.
4.  Press 
 to display the desired photo.
T o view the details of the photos, navigate to a photo.  The details of the photo will appear 
on the bottom of the screen.
T o view photos in full screen mode, perform the following:
1.  Navigate to a photo.
2.  Press 
 to view the photo in full screen mode.
T o utilize the Zoom-In tool, press 
. (2X, 4X, 8X, 16X).
In order to zoom out to the default size of the image, press the Exit key .
While a photo is displayed, the control interface can be hidden.  To hide the control 
interface, press the ▲ key . Press the ▲ key again to show the control interface.
Control Interface
The photo viewer contains the following controls:
ICON DESCRIPTION
Return to the previous menu
Sets the Slide Show interval
View photos in Slide Show mode
Rotate the photo in a counter-clockwise position
Rotate the photo in a clockwise position 
						

							16
Music
Supported Formats:
• MP3 (up to 256Kbps bit-rate)
•  WMA, MID, MIDI,  MP1, MP2, OGG,  AAC,  AMR, W AV, AC3, M4A,  AWB,  APE
Playing your  Track
To open the music list, perform the following:
1.  Press the ◄ or ► key to select the Music icon in the media suite menu.
2.  Press 
3. Select the folder containing the desired song.
4.  Press 
 to play the desired song.
A song can be played or paused by selecting  the Pause/Play button in the music 
player interface.
When the cursor is selecting the progress ba r, a song can be paused or can be 
played by pressing 
.
Control Interface
The music player interface contains the following controls: 
						

							17
The music player provides controls to navigate through a song playlist. The following table 
provides a description the controls.
ICONDESCRIPTION
 /  / Toggle speaker output to Left/Right/Stereo
 / Return to previous/Forward to next track
 / Pause/Play track
Stop playback
Return to the previous menu
The order of songs and playback mode can be adjusted. The following table provides a 
description of the playback modes.
ICONDESCRIPTION
Songs in the playlist will play in a continuous 
order
All songs in the playlist will repeat
Only the current song playing will repeat
All songs in the playlist will be shuffled during 
playback
The music player contains many preset equalizer settings that can be applied.  The 
following table provides a description of the different equalizer settings.
ICONDESCRIPTION
Normal
Classical
Jazz
Pop
Rock
Bass  
						

							18
Office Viewer
Supported Formats
The document viewer in the Qumi Media Suite can open the following types of documents:
• Microsoft® Word (97-2007, .doc/.docx)
• Microsoft® PowerPoint (97-2007, .ppt/.pptx)
• Microsoft® Excel (97-2007, .xls/.xlsx)
• Adobe® PDF (.pdf)
• Text (.txt) 
Selecting Your Document
To open a file in document viewer, perform the following:
1. Press the ◄ or ► key to select the office viewer icon in the media suite menu.
2. Press  to open the file directory.
3. Select the folder containing the desired file.
4. Press  to display the desired file.
Once a file is open, press  to zoom in for a larger view of the file. Files can be zoomed 
in 2X, 4X, 8X and 16X views. Use the navigation keys to move the view of the file.
To proceed to the next page or return to a previous page, press the ▲ or ▼ keys.
Note: 
You cannot move to the previous or next page if the view is zoomed in.
Control Interface
The office viewer does not contain a dedicated control interface.  
						

							19
Settings
System Options
The Information 
menu provides details about the software version.
Play Mode
The play mode menu displays settings for both video and music player opt\
ions.  The 
following settings are available:
• Repeat None –  The videos or music tracks will not repeat after it is completed.
• 
•  Repeat One –  A selected video or music track will continuously repeat after it is 
completed.
• 
the playlist have been completed.
Note: 
The Qumi media suite will always output 1280x800 resolution to the system, 
therefore the OSD will be displayed in this resolution as its received signal.This 
does not indicate the actual resolution of the actual multimedia files.
USB Options
The USB Mass Storage option allows you to connect a personal computer wi\
th a 
supported USB flash device to transfer files between the Qumi and person\
al computer.
Note: 
The Qumi media suite only supports input from USB drives and MicroSD memory 
devices . 
						

							20
Chapter 4  On-Screen Display (OSD) Settings
OSD Menu Controls
The Qumi has an On-Screen Display (OSD) settings menu that allows you \
to make 
adjustments and changes to settings, such as display and audio. There ar\
e five (5) 
menus within the OSD menu:• Image – V arious aspects of the image quality
•  Computer – Settings for personal computers
•  Video/Audio – Many settings for video and audio
•  Installation I – Default language and other settings
•  Installation II – Factory reset and other settings
If the interface is set on  AV -IN, MINI HDMI or Universal I/O, the OSD menu can be 
accessed by pressing the  MENU button on the remote control or keypad.
If the interface is set on the Qumi Media Suite menu, the OSD menu can b\
e accessed by 
pressing the  MENU button on the remote control or by simultaneously pressing  MENU 
and 
 on the keypad.
Note: 
If the OSD menu is inactive for 15 seconds, the OSD menu will close.
Navigating the OSD
The remote control cursor buttons or the buttons on the top of the Qumi \
can be used to 
navigate and make changes to the OSD settings. 
1.  Enter the OSD menu.
2. Press  the  ◄  or ►  butto n 
to move through the 5 
menus.
3.  Press  the  ▲  or ▼  butto n 
to move the cursor up 
and down within in a 
menu.
4.  Pre ss  ◄ or ► to  chang e 
settings.
5.    Press MENU button or 
Exit on the remote 
control to close the OSD 
or close a submenu.
Note: 
example, the Horizontal/ Vertical Position items in the Computer menu can only 
. 
						

							21
Setting the OSD Language
The language that is displayed in the OSD can be changed. To change the language in 
the OSD, perform the following steps: 
1. Enter the OSD menu. Press the ◄ or ► button to select the Installation I menu.
 
2. Press the ▲ or ▼ button until the cursor highlights the Language setting.
 
3. Press the ◄ or ► button until the language you want is shown in the cursor.
4. Press the EXIT button or MENU button twice to close the OSD.  
						

							22
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.  
						

							23
OSD Sub-Menu Overview 
						

							24
Image Menu 
To access the  Image menu and adjust the settings, perform the following steps:
1.  Enter the OSD menu. 
2.  Press the ◄ or ► button to select the  Image menu. 
3.  Press the ▲ or ▼ button to move the cursor up or down in the Image menu. 
4.  Press the ◄ or ► button to change values for each applicable setting.
ITEM DESCRIPTION
Display ModePress the ◄ or ► button to set the Display Mode.
Brilliant Color Press the ◄ or ► button to adjust the Brilliant Color value.
Brightness Press the ◄ or ► button to adjust the display brightness.
Contrast Press the ◄ or ► button to adjust the display contrast.
Sharpness Press the ◄ or ► button to adjust the display sharpness level.
Gamma Press the ◄ or ► button to adjust the gamma correction of the 
displa
y.
Advanced Press 
 to enter the 
Advanced menu. See Advanced Feature  
on page 25.
Reset Press 
 to reset all settings to default values.
Note: 
The settings for BrilliantColor, Brightness, Contrast, Sharpness, Gamma and 
Advanced modes are only adjustable when the Display Mode is set to User.