Vivitek Projector DW3320 User Manual

							— 32 — 
Color Manager 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to 
move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and down in the 
Color Manager menu.  
 
ITEM DESCRIPTION 
Red Select to enter the Red Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Green Select to enter the Green Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue Select to enter the Blue Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan Select to enter the Cyan Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Magent~ Select to enter the Magenta Color janager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Yellow Select to enter the Yellow Color Manager.  
Press the◄► buttons to adjust the Hue, Saturation, and Gain. 
White Select to enter the White Color Manager.  
Press the ◄► buttons to adjust the Red, Green, and Blue. 
 
  
						

							– 33 – 
Settings 1 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Settings 1 
menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. Press ◄► to enter and 
change values for settings. 
 
ITEM DESCRIPTION 
Source Press the cursor ◄► button to enter the Source menu. oeference input Source select 
(Io L Keypad). 
Projection Press the cursor ◄► button to enter and choose from four projection methods: 
Aspect Ratio Press the cursor ◄► button to enter and adjust the video aspect ratio. 
Keystone Press  (Enter) / ► to enter the keystone menuK See Keystone on page 34. 
Digital Zoom  Press the cursor ◄► button to enter and adjust the Digital Zoom menu.  
Audio Press  (EnterF / ► to enter the Audio menu. See Audio on page 34. 
Advanced 1 Press  (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on 
page 35. 
Advanced 2 Press  (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on 
page 37. 
4 Corner Press   (Enter) / ► to enter the 4 Corner sub menu. See 4 Corner on page 38.  
Note: Without support when 3D mode activated. 
       
						

							— 34 — 
Keystone 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▼▲ to 
move to the Keystone menu and then press Enter or ►. Press ▼▲to adjust vertical values from -30 to 
30. Press ◄► to adjust horizontal values from -25 to 25. 
 
 
Audio 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▼▲ to 
move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the Audio menu. 
 
ITEM DESCRIPTION 
Volume Press the cursor ◄► button to enter and adjust the audio volume.  
Mute Press the cursor ◄► button to enter and turn on or off the speakerK 
Out Press the cursor ◄► button to select audio output connector.  
Note: When select Off, the default sound is output from speakers. 
  
						

							– 35 – 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to 
move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down in the 
Advanced 1 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Language Press the cursor ◄► button to enter and select a different localization Menu. 
Security Lock  Press the cursor ◄► button to enter and enable or disable security lock functionK 
Blank Screen Press the cursor ◄► button to enter and select different color to blank the screenK 
Splash Logo Press the cursor ◄► button to enter and enable or disable Splash Logo. 
Closed Captioning Press the cursor ◄► button to enter and enable or disable Closed Captioning 
Keypad Lock 
Press the cursor ◄► button to enter and enable or disable keys can be work on 
keypadK 
Note : Hold the cursor ▼ button on keypad for 5 seconds to unlock keypad 
3D Setting Press  (EnterF / ►to enter the 3D menu. See page 36 for more information on 3D 
Setting. 
Note:  
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device under the 
3D Disc Menu. 
   
						

							— 36 — 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the cursor ◄► button to enter and select different 3D modeK 
3D Sync Invert Press the cursor ◄► button to enter and enable or disable 3D Sync InvertK 
3D Format Press the cursor ◄► button to enter and enable or disable different 3D Format. 
 
Note: 
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled for 
selection. 
3. Use 3D glasses to view a 3D image. 
4. You need 3D content from a 3D DVD or 3D media file. 
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection feature). 
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a 
driver on your PC and connect a USB emitter. 
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 
8. Power on the glasses. Glasses normally have a power on -off switch.  
Each type of glasses has their own configuration instructions. Please follow the configuration 
instructions that come with your glasses to finish the setup process. 
 
Note:  
Since different types of glass (DLP link or IR shutter glass) have their own setting instructions, 
Please follow the guide to finish the setup process.  
						

							– 37 – 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to 
move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down in the 
Advanced 2 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Test Pattern Press the cursor ◄► button to enter and select internal test patternK 
H Image Shift Press the cursor ◄► button to enter and select H Image ShiftK 
V Image Shift Press the cursor ◄► button to enter and select V Image ShiftK  
						

							— 38 — 
4 Corner 
Press   (Enter) / ► to enter the 4 Corner sub menu. 
1. Press the cursor ▲ / ▼ buttons to select a corner and press ENTER. 
 
2. Press the cursor ▲ / ▼ buttons to adjust vertical and press the cursor ◄ / ► buttons to 
adjust horizontal. 
3. Press MENU to save and Exit the settings. 
     
						

							– 39 – 
Settings 2 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Settings 2 
menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu.  
 
ITEM DESCRIPTION 
Auto Source Press the cursor ◄► button to enter and enable or disable automatic source 
detection.  
No Signal Power 
Off (min.) 
Press the cursor ◄► button to enter and enable or disable automatic shutdown of 
lamp when no signal.  
Auto Power On Press the cursor ◄► button to enter and enable or disable automatic power On when 
AC power is suppliedK 
Lamp Mode Press the cursor ◄► button to enter and select the lamp mode for higher brightness 
or lower brightness to save lamp life. 
Reset All Press  (EnterF / ► to reset all settings to default values. 
Status Press  (Enter) / ► to enter the Status menu. See page 40 for more information on 
Status. 
Advanced 1 Press  (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on 
page 41. 
Advanced 2 Press  (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on 
page 43. 
Note : 
Dynamic ECO: Auto power consumption saving according to your dynamic content (30% Max saving on 
blank screen). 
Extreme Dimming: Saving 50% lamp power consumption by blank screen (press BLANK button)  
      
						

							— 40 — 
Status 
Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status menu and 
press Enter or ► to enter. 
 
ITEM DESCRIPTION 
Active Source Display the activated source. 
Video Information Displays resolution/video information for RGB source and color standard for Video 
source. 
Lamp Hours Lamp hour used information is displayed. (Eco, Normal, Dynamic Eco) 
Software Version Showing system software version. 
Remote ID Showing Remote Controller ID 
Serial Number Showing serial number of product. 
Air Filter Hour Displays the number of hours the air filter has been in use. 
  
						

							– 41 – 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press ▲▼ to 
move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down in the 
Advanced 1 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Menu Position Press the cursor ◄► button to enter and select different OSD location. 
Translucent Menu Press the cursor ◄► button to enter and select OSD background translucent level.  
Low Power Mode Press the cursor ◄► button to enter and turn Low Power Mode lff, ln or On By LanK 
Fan Speed 
Press the cursor ◄► button to enter and toggle between Normal and High fan 
speedsK  
Note: We recommend selecting high speed in high temperatures, high humidity, or 
high altitude (higher than 1500m/4921ft) areas. 
Lamp Hour Reset After replacing the lamp, this item should be reset. See page 42 for more information 
on Lamp Hour Reset. 
Projector ID  Press the cursor ◄► button to enter and adjust a two digit projector ID from M0 
through V8K 
Remote Ia Press the cursor ◄► buttons to select remote ID to fit the current remote ID settings. 
Network Press  (Enter) / ► to enter the Network menu. See page 42 for more information on 
Network. 
Note: 
About “On By Lan”, RJ45 will support to be waked up in this mode(Under 6W) but scalar won’t. 
 
Note: 
1. Remoter with Default customer code will be available for any Remote ID setting on the OSD. 
2. Status key will be available for any Remote ID setting on the OSD 
3. IF users forget the current Remote ID setting, please press the Status key to call out the 
INFORMATION OSD to check the current Remote ID setting and then adjust the ID on the remoter 
to meet the OSD setting. 
4. After adjusting Remote ID from OSD, only if the OSD Menu has been closed then the new ID value 
can be taken effected and memorized. 
5. The setting value “Default” means ID 0 on the remoter.