ViewSonic Projector Pro8400 User Manual

							
ViewSonic  Pro8400 39
Controlling the projector through a web browser
Once you have the correct IP address for the projector and the projector is on or in 
standby mode, you can use any computer that is on the same local area network to 
control the projector.
Important
„If you are using Microsoft Internet Explorer, make sure it is version 7.0 or 
higher.
„The screenshots in this manual are for reference only, and may differ from 
the actual design.
1. Enter the address of the projector in the address bar of your browser and press  Enter.
2. The main page of the ViewSonic webpage control system appears.
3. To change the language for the web pages, click the down arrow to reveal a drop  down list and select a desired language.
4. To download pwPresenter, click Download. See  “Displaying images through 
pwPresenter” on page 45  for details.
5. To achieve best performance, download the install mirror display driver.
6. To download USB LAN driver, click Download.
4
5
6
7
8
3 
						

							
ViewSonic  Pro8400 40
7. To have access to the Admin page, you need to enter a password. The default 
password is “0000”.
„System Status: Displays the system information.
„General Setup: Allows you to change the password for the Admin page.
„Picture Setup/Image Setup: Provides some OSD menu items for adjusting 
the projected pictures.
„Alert Setup/SMTP Mail Setup: Allows you to setup the mail server and send 
system error messages to your ITS administrator.
„Network Setup: Provides wired and wireless network settings.
„Presenter Setup: Allows you to change Admin and User passwords for web 
control.
„Reset to Default: Allows you to restore the device to the factory default 
settings.
„Reboot System: Allows you to reboot the device immediately. 
						

							
ViewSonic  Pro8400 41
8. The Crestron (eControl) page displays the Crestron eControl user interface. The 
eControl page provides a variety of virtual keys to control the projector or adjust 
the projected pictures.
i. These buttons function the same as the ones on the OSD menus or remote control.
ii. To switch between input signals, click on your desired signal.
iii. To change the language for the Crestron page, click the down arrow to  reveal a drop down list and select a desired language.
Important
„The Menu button can also be used to go back to previous OSD menus, exit 
and save menu settings.
„The source list varies according to the connectors available on the projector.
„When you use the projector control panel or remote control to change the 
OSD menu settings, it may take a while for the web browser to synchronize 
these changes with the projector.
i
i
iii
iii
You can press W/X to reveal 
more buttons. 
						

							
ViewSonic  Pro8400 42
The tools page allows you to manage the projector, configure the LAN control settings 
and secure access of remote network operation on this projector.
iv. This section is only used with the Crestron Control System. Please contact Creston or refer to its user manual for setup information.
v. Click the down arrow to reveal a drop down list and select a default  language.
vi. You can name the projector, keep track of its location and the person in  charge of it.
vii. You can adjust the LAN Control Settings.
viii. Once set, access to the remote network operation on this projector has  been password-protected.
ix. Once set, access to the tools page has been password-protected.
Important
„To prevent errors, only input the English alphabet and digits on the tools 
page.
„After making the adjustments, press the Send button and the data will be 
saved for the projector.
x. Press  Exit to go back to the remote network operation page.
ivvi
vvii
viii
ix
x 
						

							
ViewSonic  Pro8400 43
Please pay attention to the limitation of input length (including space and other 
punctuation keys) in the list blow:
Category ItemInput LengthMaximum Number of
Characters
Crestron Control IP Address 15
IP ID 2
Port 5
Projector Projector Name 10
Location 9
Assigned To 9
Network Configuration DHCP (Enabled) (N/A)
IP Address 15
Subnet Mask 15
Default Gateway 15
DNS Server 15
User Password Enabled (N/A) New Password 20
Confirm 2
Admin Password Enabled (N/A) New Password 20
Confirm 20 
						

							
ViewSonic  Pro8400 44
The info page displays the information and status of this projector.
After pressing the button “Contact IT Help”, the HELP DESK window will appear in the 
upper right corner of the screen. You will  be able to deliver messages to RoomView 
software administrators/users who c onnect to the same local area network.
For more information, visit  http://www.crestron.com & www.crestron.com/getroomview .
Press Exit to go 
back to the 
remote network 
operation page. 
						

							
ViewSonic  Pro8400 45
Displaying images through pwPresenter
Downloading and in stalling pwPresenter
The pwPresenter is an application running on the host PC. It helps connect your 
computer to an available network projector and transfer the desktop content to the 
network projector via local network connection.
1. Enter the main page of Network Control. See steps 1-2 on page  39 for details.
2. Download pwPresenter.
3. When the download is complete, install  the software to your computer by clicking 
the exe file. Follow the on-screen inst ructions to complete the installation.
4. Launch pwPresenter.
Using pwPresenter
1. The Search page allows you to search and connect to a projector.
i. To connect to a projector, select Directly then type the projector IP address  and click Connect.
ii. To search for projectors, simply click Search to list all the projectors on the 
same local area network. Click the desired projectors in the Search result 
list, and click Connect directly. You can also type a desired projector name 
and click Search.
iii. You can link to the ViewSonic webpage control system on  page 39.
1
2
4&5
6
7
3
i
iii
ii 
						

							
ViewSonic  Pro8400 46
2. The Capture screen allows you to start or pause capture screen.
3. You can choose a capture mode from here.
i. To display a full screen, click FullScreen.
ii. To display a partial screen, click FixedSize. A square appears on your 
screen. You can place it where you want to project. 
iii. If you wish to change the square, click Alterable.
i
ii
iii 
						

							
ViewSonic  Pro8400 47
4. The Basic Setting page allows you to configure pwPresenter.
i. To change the pwPresenter interface language, click the down arrow to 
reveal a drop-down list and select a desired language. Click Apply.
ii. Users can change the size parameters of the frame in FixedSize capture  mode by modifying width and height on this page and click Apply to make 
changes take effect. 
iii. User can use the mirror driver for presenter capture image, if the system  has installed the mirror driver.
iv. To allow notification messages to appear, click Yes. Click Apply.
v. The Software Information is available on this page.
v
iviii
ii
i 
						

							
ViewSonic  Pro8400 48
5. The Advanced Setting page allows you to configure pwPresenter.
i. To adjust the image quality, click the down arrow to reveal a drop-down list 
and select a desired quality level. Click Apply.
ii. To adjust the capture rate, move the slide bar. The network bandwidth may  also affect the performance.
iii. Network port setting for fixed or manual type.
i
ii
iii