ViewSonic Projector Pro8400 User Manual

							
ViewSonic
®
Model No. : VS13647
Pro8400
DLP Projector
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手册 (简体)
- 사용자 안내서
- คู่มือการใช้งาน
- Podręcznik użytkownika
- Kullanιcι kιlavuzu
IMPORTANT:  Please read this User Guide to obtain important 
information on installing and using your product in a safe 
manner, as well as registering your product for future service.  
Warranty information contained in this User Guide will describe  your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.com in 
English, or in specific languages using the Regional selection  box in the upper right corner of our website.
“Antes de operar su equipo lea cuidadosamente las  instrucciones en este manual” 
						

							
i
ViewSonic   Pro8400
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio 
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:
    •
  Reorient or relocate the receiving antenna.
    •
  Increase the separation between the equipment and receiver.
    •
    Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
    •
  Consult the dealer or an experienced radio/TV technician for help.
Warning: 
You are cautioned that changes or modifications not expressly approved by the 
party responsible for compliance could void your authority to operate the equipment.
For Canada
    •   This Class B digital apparatus complies with Canadian ICES-003.
    •   Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CE Conformity for European Countries
The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 
2006/95/EC.
Following information is only for EU-member states:The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 
2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment including any spent or 
discarded batteries or accumulators as unsorted municipal waste, but use the return and 
collection systems available.
If the batteries, accumulators and button cells included with this equipment, display the 
chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of 
more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead. 
						

							
ii
ViewSonic   Pro8400
Important Safety Instructions
1.   Read these instructions.
2.    Keep these instructions.
3. 
  Heed all warnings.
4. 
  Follow all instructions.
5. 
  Do not use this unit near water.
6. 
    Clean with a soft, dry cloth.
7. 
 
 Do not block any ventilation openings. Install the unit in accordance with the 
manufacturer’s instructions.
8.     Do not install near any heat sources such as radiators, heat registers, stoves, or other 
devices (including amplifiers) that produce heat.
9. 
    Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized 
plug has two blades with one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade and the third prong are provided 
for your safety. If the provided plug does not fit into your outlet, consult an electrician 
for replacement of the obsolete outlet.
10. 
    Protect the power cord from being walked on or pinched particularly at plugs. 
Convenience receptacles and the point where they exit from the unit. Be sure that the 
power outlet is located near the unit so that it is easily accessible.
11. 
    Only use attachments/accessories specified by the manufacturer.
12. 
    Use only with the cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the unit. When a cart is used, use caution when 
moving the cart/unit combination to avoid injury from tipping over .
13. 
    Unplug this unit when unused for long periods of time.
14. 
    Refer all servicing to qualified service personnel. Servicing is required when the unit 
has been damaged in any way, such as: if the power-supply cord or plug is damaged, 
if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or 
moisture, or if the unit does not operate normally or has been dropped. 
						

							
iii
ViewSonic   Pro8400
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the 
European Parliament and the Council on restriction of the use of certain hazardous substances in 
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum 
concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: 
Substance Proposed Maximum 
Concentration Actual Concentration
Lead (Pb) 0.1%< 0.1%
Mercury (Hg) 0.1%< 0.1%
Cadmium (Cd) 0.01%< 0.01%
Hexavalent Chromium (Cr 6+
) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1%< 0.1%
Polybrominated diphenyl ethers (PBDE) 0.1%< 0.1%
Certain components of products as stated above are exempted under the  Annex of the RoHS Directives 
as noted below:
Examples of exempted components are:
1. 
 
Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not 
specifically mentioned in the Annex of RoHS Directive.
2. 
 
Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic 
parts (e.g. piezoelectronic devices).
3. 
 
Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4. 
 
Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up 
to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. 
						

							
iv
ViewSonic   Pro8400
Copyright Information
Copyright© ViewSonic® Corporation, 2010. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft 
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of 
ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are 
trademarks of VESA.
PS/2,
 
VGA and XGA are registered trademarks of International Business Machines Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions 
contained herein; nor for incidental or consequential damages resulting from furnishing this material, or 
the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change 
product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose 
without prior written permission from ViewSonic Corporation.
Product RegistrationTo meet your future needs, and to receive any additional product information as it becomes available, please 
register your product on the Internet at: www.viewsonic.com. The ViewSonic® Wizard CD-ROM also 
provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date: Pro8400
ViewSonic DLP Projector
VS13647
Pro8400_UG_ENG Rev. 1A 09-16-10
_______________________________
_______________________________
Product disposal at end of product life
The lamp in this product contains mercury which can be dangerous to you and the environment. Please use 
care and dispose of in accordance with local, state or federal laws.
ViewSonic respects the environment and is committed to working and living green. Thank you for being 
part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
1. USA: www.viewsonic.com/company/green/
2. Europe: www.viewsoniceurope.com/uk/support/recycling-information/
3. Taiwan: recycle.epa.gov.tw/recycle/index2.aspx 
						

							
CONTENTS
ViewSonic  Pro8400
Introduction ...................5
Projector Features ............................ 5
Package Contents  ............................ 6
Projector Overview  ........................... 8
Using the Product  .......10
Control Panel  ................................. 10
Connection Ports ............................ 11
Remote Control  .............................. 13
Installing the Batteries  .................... 15
Remote Control Operation  ............. 16
Connection ..................17
Connecting a computer or monitor .  18
Connecting Video source devices ..  19
Operation .....................22
Powering On/Off the Projector .......  22
Adjusting the Projector Height........  23
Adjusting the Projector Zoom and 
Focus ............................................. 23
Adjusting Projection Image Size  .... 24
Locking control keys ....................... 25
Menu Operation  ............................. 26
Controlling the projector through a LAN 
environment ................................... 36
Controlling the projector through a web 
browser .......................................... 39
Displaying images through pwPresenter
.......................................................  45
Displaying pictures with a USB storage 
device ............................................. 51
Maintenance ................53
Cleaning the Lens  .......................... 53
Cleaning the Projector Housing  ..... 53
Cleaning the Filter Cover  ............... 53
Replacing the Lamp  ....................... 54
Specifications ..............56
Dimensions .................................... 57
Ceiling mount installation  ............... 57
Appendix ......................58
LED Indicator Messages  ................ 58
Compatibility Modes  ....................... 59
Troubleshooting .............................. 61
RS-232 Command and 
Configuration .................................. 62
IR Control Code  .............................. 64 
						

							
ViewSonic  Pro8400 5
Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user - friendly 
design to deliver high reliability and ease of use.
The projector offers the following features:
„Single chip 0.65 Texas Instruments DLP® technology
„1080p (1920 x 1080 pixels)
„Compatibility with Macintosh® computers
„Compatibility with NTSC, PAL, SECAM and HDTV
„D-Sub 15-pin terminal for analog video connectivity
„User-friendly, multi-language on-screen display
„Advanced electronic keystone correction
„RS-232 connector for serial control
„HDMI compatibility
„PJLinkTM compatible
„LAN display for network control and web server
„LAN display 4-1 (maximum 4PC/ NB display to 1 projector)
„Remote desktop feature for LAN and USB display 1-M (maximum 1PC/ NB can 
display to 8 projectors at the same time)
„USB display supports computer connection via USB mini-B type to A type cable
„USB Reader supports USB flash drive via USB A type connector
„Less than 1 W power consumption in standby mode
„The information in this manual is subject to change without notices.„The reproduction, transfer or copy of all or any part of this document is not 
permitted without express written consent. 
						

							
ViewSonic  Pro8400 6
Package Contents
When you unpack the projector, make sure you have all these components:
Optional accessories
Projector with Lens Cap AC Power Cord Remote Control (IR) & batteries
VGA Cable (D-SUB to D- SUB) HDMI Cable ViewSonic CD 
WizardQuick Start 
Guide
Filter cover
P/N: P4R34-4600-00 RS232 cable
P/N: J2552-0208-00RGB to component adapter
P/N: J2552-0212-00
HDMI1 HDMI2 Compo
PC
Video
Swap
Default
V ie wSonic


 
						

							
ViewSonic  Pro8400 7
Projector Carrying Case
„Contact you dealer immediately if any items are missing, appear damaged, or if
the unit does not work.„Save the original shipping carton and Packing material; they will come-in 
handy if you ever to ship your unit. for maximum protection, repack your unit as 
it was originally packed at the factory. 
						

							
ViewSonic  Pro8400 8
Projector Overview
Front View
Lens cap Filter cover
Elevator button Speaker
Elevator foot Focus ring
Lens cap strap Zoom ring
Projection lens Control panel
Front IR remote control sensor Lamp cover
Ventilation holes (intake)
685
1211109
4321
13
7
18
29
310
411
512
613
7