ViewSonic Projector Pro10 Series User Manual
Here you can view all the pages of manual ViewSonic Projector Pro10 Series User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
60 Image has vertical flickering bar ` Use “Frequency” to make an adjustment. ` Check and reconfigure the display mode of your graphic card to make it compatible with the projector. Image is out of focus ` Make sure the lens cover is removed. ` Adjust the Focus function for the projector lens. ` Make sure the projection screen is between the required distance. The image is stretched when displaying 16:9 DVD title ` When you play anamorphic DVD or 16:9 DVD, the projector will show...
Page 62
![Page 62
61
Projector Problems
The projector stops responding to all controls
` If possible, turn off the projector, then unplug the power cord and wait\
at
least 60 seconds before reconnecting power.
` Check that “Keypad Lock” is not activated by trying to control the\
projector
with the remote control.
Lamp burns out or makes a popping sound
` When the lamp reaches its end of life, it will burn out and may make a l\
oud
popping sound. If this happens, the projector will not turn on until the\...](http://img.usermanuals.tech/thumb/80/99452/w300_projector_manual_7985_d-61.png "Page 62
61
Projector Problems
The projector stops responding to all controls
` If possible, turn off the projector, then unplug the power cord and wait\
at
least 60 seconds before reconnecting power.
` Check that “Keypad Lock” is not activated by trying to control the\
projector
with the remote control.
Lamp burns out or makes a popping sound
` When the lamp reaches its end of life, it will burn out and may make a l\
oud
popping sound. If this happens, the projector will not turn on until the\...")
61 Projector Problems The projector stops responding to all controls ` If possible, turn off the projector, then unplug the power cord and wait\ at least 60 seconds before reconnecting power. ` Check that “Keypad Lock” is not activated by trying to control the\ projector with the remote control. Lamp burns out or makes a popping sound ` When the lamp reaches its end of life, it will burn out and may make a l\ oud popping sound. If this happens, the projector will not turn on until the\...
Page 63
62 Step 4: On the General tab, under This connection use the following items, click Internet Protocol(TCP/IP), and then click “Properties”. Step 5: Click Use the following IP address , and type in as below: 1) IP address: 192.168.0.101 2) Subnet mask: 255.255.255.0 3) Default gateway: 192.168.0.254
Page 64
![Page 64
63
Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click “LAN Setting…”.
Step 7: All items in the Local Area Network (LAN) Setting window must unchecked. Then click “OK” button twice.
Step 8: Connect a cat5 Ethernet cross-over cable between the projector a\
nd the computer.](http://img.usermanuals.tech/thumb/80/99452/w300_projector_manual_7985_d-63.png "Page 64
63
Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click “LAN Setting…”.
Step 7: All items in the Local Area Network (LAN) Setting window must unchecked. Then click “OK” button twice.
Step 8: Connect a cat5 Ethernet cross-over cable between the projector a\
nd the computer.")
63 Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click “LAN Setting…”. Step 7: All items in the Local Area Network (LAN) Setting window must unchecked. Then click “OK” button twice. Step 8: Connect a cat5 Ethernet cross-over cable between the projector a\ nd the computer.
Page 65
64 On Screen Messages y Power off confirm y Lamp error y Lamp Life warning y Filter error
Page 66
![Page 66
65
Replacing the Lamp
A warning message will be displayed once the lamp has surpassed life exp\
ectancy.
At this point, it is recommended to change the lamp as soon as possible.\
Please
contact your local reseller or ViewSonic to acquire a lamp.
Type number: RLC-087
Warning: If ceiling mounted, please use caution when opening the lamp
access panel. It is recommended to wear safety glasses if changing the
bulb when ceiling mounted. “Caution must be used to prevent any loose\
parts from falling out...](http://img.usermanuals.tech/thumb/80/99452/w300_projector_manual_7985_d-65.png "Page 66
65
Replacing the Lamp
A warning message will be displayed once the lamp has surpassed life exp\
ectancy.
At this point, it is recommended to change the lamp as soon as possible.\
Please
contact your local reseller or ViewSonic to acquire a lamp.
Type number: RLC-087
Warning: If ceiling mounted, please use caution when opening the lamp
access panel. It is recommended to wear safety glasses if changing the
bulb when ceiling mounted. “Caution must be used to prevent any loose\
parts from falling out...")
65 Replacing the Lamp A warning message will be displayed once the lamp has surpassed life exp\ ectancy. At this point, it is recommended to change the lamp as soon as possible.\ Please contact your local reseller or ViewSonic to acquire a lamp. Type number: RLC-087 Warning: If ceiling mounted, please use caution when opening the lamp access panel. It is recommended to wear safety glasses if changing the bulb when ceiling mounted. “Caution must be used to prevent any loose\ parts from falling out...
Page 67
66 Lamp Replacing Procedure: 1. Switch off the power to the projector by pressing the “” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the two screws on the lamp door. 1 5. Open and pull up the lamp door. 2 6. Unscrew the three screws on the lamp housing. 3 7. Pull out the lamp module slowly and carefully. 4 To replace the lamp module, reverse the previous steps. 8. Turn on the projector and use “Lamp Reset” after the lamp...
Page 68
67 Replacing the Filter Filter Replacing Procedure: 1. Switch off the power to the projector by pressing the “” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the four screws on the filter cover and pull out the cover . 1 5. Remove the old filter and replace it with the new one. 2 6. Attach the filter cover and secure it with the four included screws. 2 1
Page 69
68 Compatibility Modes ` Computer Compatibility (PC) Signal Resolution Frequency H. (KHz) Refresh Rate (Hz) Video DigitalAnalog Remark NTSC -15.734 60○-- PAL/SECAM -15.625 50○-- 640 x 350 31.570.1 ○○ 70Hz 640 x 400 37.985.1 ○○ 85Hz 720 x 400 31.570 ○○ 720 x 400 37.985 ○○ 720 x 576 50○○ VGA 640 x 480 31.560 ○○ VGA 640 x 480 67○ ○ VGA 640 x 480 37.972.8 ○○ 72Hz VGA 640 x 480 37.575 ○○ VGA 640 x 480 43.385 ○○ SVGA 800 x 600 35.256.3 ○○ 56Hz SVGA 800 x 600 37.960.3 ○○ 60Hz SVGA 800 x 600 46.975 ○○ SVGA...
Page 70
69 SignalResolution Frequency H. (KHz) Refresh Rate (Hz) Video DigitalAnalog Remark 1920 x 1080i 50-○ ○ 1920 x 1080i 60-○ ○ 1920 x 1080p 24-○ ○ 1920 x 1080p 25-○ ○ 1920 x 1080p 30-○ ○ 1920 x 1080p 50-○ ○ 1920 x 1080p 60-○ ○ 1280 x 720 4560○-- 1280 x 720p 50-○ ○ 1280 x 720p 60-○ ○ SDTV 720 x 576 31.350○-- 720 x 576i 50-○ ○ 720 x 576p 50-○ ○ 720 x 480 31.560○-- 720 x 480i 60-○ ○ 720 x 480p 60-○ ○ ` Computer Compatibility for MAC Resolution Refresh Rate (Hz) Macbook compatibility Macbook Pro (Intel)...