ViewSonic Projector Pro10 Series User Manual

30
Main MenuSub Menu Settings
SETTINGAudio Settings
Internal Speaker
On / Off
Mute On / Off
Volume Exit
Advanced Logo
Viewsonic / Neutral / User
Logo Capture On / Off
Closed 
Captioning CC1 / CC2 / CC3 / CC4 / Off
Exit
Network Network State
DHCP
IP Address
Subnet Mask GatewayDNS
Apply
Control System  IP Address
Control System  IP ID
Control System  Port
Exit
Image Blending Blending
On / Off
Crop On / Off
Overlap Left Start / Left End / Right Start / Right 
End / Up Start / Up End / Down Start / 
Down...

31
Main MenuSub Menu Settings
OPTIONSAuto Source
On / Off
High Altitude On / Off
Status Hide On / Off
Keypad Lock Lock / Unlock
Test Pattern None / Grid / White
Background Color Blue / Black / Red / Green / White
Lamp Settings Lamp Hour
Lamp Reminder On / Off
Lamp Mode Normal / ECO / Power
Lamp Reset Yes / No
Exit
Remote Settings My Button
BrilliantColor / Gamma / DynamicBlack / 
Color Temp. / Projection / Projector ID / 
HDMI Cable
Top IR Function On / Off
Front IR 
Function On / Off
Remote Code Exit...

32
PICTURE
Color Mode
There are many factory presets optimized for various types of images. 
` Presentation: Good color and brightness from PC input.
 
` Bright: Maximum brightness from PC input.
 
` Movie: For home theater.
 
` sRGB: Standardised accurate color.
 
` DICOM SIM.: This display mode simulates the greyscale/gamma performance \
of 
equipment used for “Digital Imaging and Communications in Medicine”\
 (DICOM).
IMPORTANT
: This mode should NEVER be used for medical diagnosis, it is for educat\...

33
Contrast
The contrast controls the degree of difference between the lightest and \
the darkest 
parts of the picture. Adjusting the contrast changes the amount of black\
 and white in 
the image. 
` Press the ◄ button to decrease the contrast.
 
` Press the ► button to increase the contrast.
Sharpness
Adjust the sharpness of the image.
 
` Press the ◄ button to decrease the sharpness.
 
` Press the ► button to increase the sharpness.
Saturation
Adjust a video image from black and white to fully...

34
PICTURE | Advanced
Noise Reduction
The motion Adaptive Noise Reduction reduces the amount of visible noise interlaced 
signals. The range is from “0” to “10”. (0: Off)
BrilliantColor™
Enable the BrilliantColorTM function to enhance the brightness while providing true, 
more vibrant colors in picture.
Gamma
This allows you to choose a gamma table that has been finetuned to bring out the 
best image quality for the input.
 
` Film: for home theater.
 
` Video: for video or TV source.
 
` Graphics: for...

35
Color Space
Select an appropriate color matrix type from AUTO, RGB, RGB(0-255), RG\
B(16-
235) or YUV.
 
  “RGB(0-255)” and “RGB(16-235)” are only supported for HD\
MI source.
Color Settings
Press  into the next menu and then use ▲ or ▼ to select item.
 
` Red Gain/Green Gain/Blue Gain/Red Bias/Green Bias/Blue Bias: Use ◄ or ► to 
Red, Green, or Blue for brightness (Gain) and contrast (Bias).
 
` Reset: Choose “Yes” to return the factory default settings for col\
or adjustments.
 
Input Source
Use...

36
SCREEN
Aspect
Use this function to choose your desired aspect ratio. 
` 4:3: This format is for 4x3 input sources.
 
` 16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced \
for 
Wide screen TV.
 
` Native: This format displays the original image without any scaling.
 
` Auto: Automatically selects the appropriate display format.
Zoom
 
` Press the ◄ button to reduce the size of an image.
 
` Press the ► button to magnify an image on the projection screen.
Overscan
Overscan function...

37
SCREEN | Geometry
PC Mode
Enable RJ45 control with PC software that allows user to control geometr\
y.
Warp
Enable the Geometry function and control by OSD.
Keystone
This allows you to correct the keystone distortion.
 
` Horizontal: Press the ◄ or ► to adjust the keystone horizontally and make a 
squarer image.
 
` Vertical: Press the ◄ or ► to adjust the keystone vertically and make a squarer 
image.
Resolution Degrees of keystone Correction
Horizontal Vertical
XGA+/- 40 +/- 40  

38
 
` Pin Cushion/Barrel: Press the ◄ or ► to adjust the pincushion/barrel distortion. 
+/- 20% pincushion and barrel distortion correction.
      
  .
 
` Reset: Return to the default setting.
4-Corner
This allows you to correct the trapezoidal distortion.
   
 
` 4 Corner position adjustments: Top Left, Bottom Left, Top Right, Bottom \
Right 
and All. Maximum is 5%.
 
` Press the ◄ or ► to adjust x/y offset of each corner image.
Curve
This allows you to adjust the curve of point 1~9.
     

39
 
` The screen is separated into 4 (2x2) grids and you can adjust every po\
int of 
grids.
      
Rotation
This allows you to level the rotated image.
 
` Rotation: Press the ◄ or ► to adjust the angle of image. Rotation angles can 
reach to +/- 90 degree.
 
` Pin Cushion/Barrel: Press the ◄ or ► to adjust the pincushion/barrel distortion. 
+/- 20% pincushion and barrel distortion correction.
 
` Reset: Return to the default setting.