ViewSonic Projector Pro10 Series User Manual

20
Powering Off the Projector
1. Press the “Standby” button on the remote control or the  “  ” button on the con-
trol panel  to turn off the projector 
1. The following message will be displayed on 
the screen. 
Press the “Standby” button on the remote control or the “   ” button on the 
control panel again 
1 to confirm otherwise the message will disappear after 15 
seconds. When you press for the second time, the projector will shut dow\
n.
2.  The cooling fans will complete the cooling cycle for...

21
Warning Indicator
When the warning indicators (see below) come on, the projector will au\
tomatically 
shutdown: 
y “LAMP” LED indicator is lit red and the “ERROR” LED indicator flashes red.  This 
indicates that the lamp has failed.
 
y “TEMP” LED indicator is lit red and the “ERROR” LED indicator flashes red.  This 
indicates the projector has overheated. Under normal conditions, the pro\
jector 
can be switched back on.
 
y “TEMP” LED indicator flashes red and the “ERROR” LED indicator flashes red....

22
Adjusting the Projector’s Height
The projector is equipped with elevator rubber feet for adjusting the im\
age 
height.
1. Locate the adjustable foot you wish to modify on the underside of the pr\
ojector.
2.  Rotate the adjustable ring clockwise to raise the projector or counter c\
lockwise 
to lower it. Repeat with the remaining feet as needed.
Adjusting the Projected Image
12  

23
Adjusting the Projecting Image’s Position
To determine where to position the projector, consider the size and shap\
e of your 
screen, the location of your power outlets, and the distance between the\
 projector 
and the rest of your equipment.
HH
H1Width
V1
Heigh t
V1
V V H1
Screen
For XGA
Platform
XGA (4:3)
DMD 0.7”
Projection Lens LEN-008LEN-009LEN-010
Wide Zoom StandardLong Zoom
Throw Ratio 0.99-1.261.26-1.581.58-3.00
Zoom Ratio 1.28X1.25X 1.9X
Throw Distance 1.01~7.68m1.28~9.63m1.61~18.29m...

24
801.22  1.63 1.61 2.05 2.05 2.57 2.57 4.88 
90 1.37  1.83 1.81 2.30 2.30 2.89 2.89 5.49 
100 1.52  2.03 2.01 2.56 2.56 3.21 3.21 6.10 
11 0 1.68  2.24 2.21 2.82 2.82 3.53 3.53 6.71 
120 1.83  2.44 2.41 3.07 3.07 3.85 3.85 7.32 
130 1.98  2.64 2.62 3.33 3.33 4.17 4.17 7.92 
140 2.13  2.84 2.82 3.58 3.58 4.49 4.49 8.53 
150 2.29  3.05 3.02 3.84 3.84 4.82 4.82 9.14 
160 2.44  3.25 3.22 4.10 4.10 5.14 5.14 9.75 
170 2.59  3.45 3.42 4.35 4.35 5.46 5.46 10.36 
180 2.74  3.66 3.62 4.61 4.61 5.78 5.78 10.97...

25
1702.29  3.66 3.66 4.69 4.69 5.90 5.86 11.24 
180 2.42  3.88 3.88 4.96 4.96 6.24 6.20 11.90 
190 2.56  4.09 4.09 5.24 5.24 6.59 6.55 12.56 
200 2.69  4.31 4.31 5.51 5.51 6.94 6.89 13.23 
250 3.37  5.38 5.38 6.89 6.89 8.67 8.62 16.53 
300 4.04  6.46 6.46 8.27 8.27 10.40  10.34 19.84   

26
User Controls
Using the Control Panel
Source
Sync
Shift
Name Description
Power 
Turn the projector on/off.
Menu Launch the on-screen display (OSD).
Exit Exit a menu.
Enter Confirm a selected item.
Four Directional 
Select Keys 1. Use ▲▼◄► to select items or make adjustments to your 
selection.
2. ▲/▼act as short hot keys for Keystone +/- adjustment. 
Sync Synchronize the projector with the input source.
Source Select an input signal.
Shift Adjust the lens shift up/down/left/right.
Focus Adjust the...

27
The Projector has multilingual On-screen Display menus that allow you to\
 
make image adjustments and change a variety of settings. The projector 
will automatically detect the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control or Control\
 Panel.
2.  When OSD is displayed, use ▲▼ keys to select any item in the main menu. 
While making a selection on a particular page, press “Enter” key t\
o enter sub 
menu.
3.  Use ▲▼ keys to select the desired item in the sub menu...

28
Structure
 
  Please note that the on-screen display (OSD) menus vary according to t\
he signal type selected and the 
projector model you are using.
Main Menu Sub Menu Settings
PICTUREColor Mode
Presentation / Bright / Movie / sRGB / 
DICOM SIM. / User
Wall Color White / Light Yellow / Light Blue / Pink / 
Dark Green
Brightness
Contrast
Sharpness
Saturation
Tint
Advanced Noise Reduction
BrilliantColorTMOn / Off
Gamma Film / Video / Graphics / Standard 
DynamicBlack On / Off
Color Temp. Warm / Medium...

29
Main MenuSub Menu Settings
SCREENPIP / POP Screen
PIP Location PIP Size 1/16 / 1/25 / 1/36
PIP/POP Source HDMI / VGA or  DVI / S-Video / Video /
BNC
Swap
Exit
SETTING Language
English / German / French / Spanish 
/Italian / Russian / Portuguese / 
Swedish / Simplified Chinese / Korean 
/ Traditional Chinese / Turkish / Polish / 
Japanese / Norwegian / Exit
Projection Front-Desktop / Rear-Desktop / Front-
Ceiling / Rear-Ceiling
Menu Location Top Left / Top Right / Center / Bottom 
Left / Bottom Right...