ViewSonic Projector PJD6250L User Manual
Have a look at the manual ViewSonic Projector PJD6250L User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
30 SYSTEM SETTING: BASICLanguage Projector Posi- tionFront Table / Rear Table / Rear Ceiling / Front Ceiling Menu SettingsMenu Display Time5 sec / 10 sec / 15 sec / 20 sec / 25 sec / 30 sec Menu PositionCenter / Top-Left / Top-Right / Bottom-Left / Bottom-Right Blank TimerDisable / 5 min / 10 min / 15 min / 20 min / 25 min / 30 min Splash Screen Black / Black / ViewSonic / Off My ButtonAuto Sync / Projector Position / Menu Position / Color Temp. / Brightness / Contrast / 3D Settings / Screen Color / Splash Screen / Message / Quick Auto Search / CEC / Audio Mode / Lamp Mode / DCR / Closed Caption / Power Saving /Informa- tion AdvancedPattern Off / 1 / 2 / 3 Message On / Off Presentation TimerTimer Period 1 ~ 240 min Timer DisplayAlways / 1 min / 2 min / 3 min / Never Timer PositionTop-Left / Bottom-Left / Top-Right / Bottom-Right Timer Count- ing DirectionCount Down / Count Up Sound ReminderOn / Off Start Count- ing / OffYe s / N o
31 SYSTEM SETTING: ADVANCED High Altitude Mode Off / On DCR Off / On Audio Settings Audio Mode Standard / Speech / Entertainment Mute Off / On Audio Volume 0 - 20 Audio In 2 Audio / Microphone Microphone Vo lu m e 0 - 10 Power On/Off Ring Tone On / Off Closed Caption Off / CC1 / CC2 / CC3 / CC4 Lamp Settings Lamp Mode Normal / Eco / Dynamic / SuperEco Reset Lamp Hours Reset / Cancel Lamp Hours Filter Settings Filter Mode Off / On Reset Filter Hours Reset / Cancel Filter Hours Remote Control Code 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 (All) Advanced Security SettingsChange Password Power on Lock Off / On Panel Key Lock Off / On Reset Settings Reset / Cancel INFORMATION Current System Status Source Color Mode Resolution Color System Lamp Hours Filter Hours IP Address MAC Address Firmware Version
32 DISPLAY Screen Color The Screen Color feature can help correct the projected picture’s colors to prevent possible color difference between the source and projected pictures. There are several precalibrated colors to choose from: Whiteboard, Greenboard, and Blackboard. Aspect Ratio Select how the picture fits on the screen: PJD6250L/PJD6252L/PJD7325: •Auto: Scales an image proportionally to fit the projectors native resolution in its horizontal or vertical width. You want to make most use of the screen without altering the source image’s aspect ratio. • 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio, as it displays them without aspect alteration. • 16:9: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio, as it displays them without aspect alteration. • Anamorphic: Scales a 16:9 aspect image vertically and horizontally in a non-linear manner so that it fills the screen with a 4:3 aspect ratio. • 2.35: 1 Scales an image so that it is displayed in the center of the screen with a 2.35:1 aspect ratio without aspect alteration. PJD6550W/PJD6552W/PJD7525W: •Auto: Scales an image proportionally to fit the projectors native resolution in its horizontal or vertical width. You want to make most use of the screen without altering the source image’s aspect ratio. • 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio, as it displays them without aspect alteration. • 16:9: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio, as it displays them without aspect alteration. • Panorama Scales a 4:3 image vertically and horizontally in a non-linear manner so that it fills the screen.
33 • Anamorphic: Scales a 2.35:1 aspect image so that it fills the screen. • 2.35: 1 Scales an image so that it is displayed in the center of the screen with a 2.35:1 aspect ratio without aspect alteration. • 16:10: Scales an image so that it is displayed in the center of the screen with a 16:10 aspect ratio,as it displays them without aspect alteration. Keystone Manually correct distorted images resulting from an angled projection. Press Keystone /// on the projector or remote control to display the Keystone correction page. Press to correct keystone at the top of the image. Press to correct keystone at the bottom of the image. Press to correct keystone at the left of the image. Press to correct keystone at the right of the image. Corner Adj. Manually adjust four corners of the image by setting the horizontal and vertical values. 1. Press / / / to select one of the four corners and press Enter. 2. Press / to adjust vertical values. 3. Press / to adjust horizontal values. Position Displays the position adjusent page. This function is only available when a PC type input signal is selected. Phase Adjusts the clock phase to reduce image distortion. This function is only available when a PC type input signal is selected. H. Size Adjusts the horizontal width of the image. This function is only available when a PC type input signal is selected. Zoom Using the remote control 1. Press on the remote control to display the Zoom bar. 2. Press / to magnify the picture to a desired size. 3. Press repeatedly to magnify the picture to a desired size. 4. To navigate the picture, press Enter to switch to the paning mode and press the directional arrows ( , , , ) to navigate the picture.
34 5. To reduce size of the picture, press Enter to switch back to the zoom in/out functionality, and press Auto Sync to restore the picture to its original size. You can also press repeatedly until it is restored to the original size. Using the OSD menu 1. Press Menu and then press until the DISPLAY menu is highlighted. 2. Press to select Zoom and press Enter. The Zoom bar displays. 3. Repeat steps 3-5 in the section of Using the remote control above.
35 PICTURE Color Mode There are many factory presets optimized for various types of images. • Brightest: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required. • Dynamic: Is designed for presentations under daylight environment to match PC and notebook coloring. In addition, the projector will optimize the image quality using the dynamic PC function in accordance with the projected contents. • Standard: Is designed for presentations under daylight environment to match PC and notebook coloring. • ViewMatch: Switches between high brightness performance and accurate color performance. • Movie: Is appropriate for playing colorful movies. This mode is suitable for viewing in a blackened (little light) environment Brightness Brighten or darken the image. Contrast Sets the difference between light and dark areas. Color Temp. Sets a color temperature from Warm, Normal, Neutral and Cool. • Cool: With the highest color temperature, Cool makes the image appear the most bluish white than other settings. • Neutral: Makes images appear bluish white. • Normal: Maintains normal colorings for white. • Warm: Makes images appear reddish white. • Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue. • Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue. OverScan OverScan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. HDMI Settings HDMI Format Selects appropriate HDMI format automatically or manually. Note • This function is only available when the HDMI-input port is in use. HDMI Range
36 • Enhanced : The range for HDMI output signal is from 0 - 255. • Normal: The range for HDMI output signal is from 16 - 235. Advanced Tint Adjusts the red and green color tones of the image. Color The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the picture becomes. Sharpness Adjusts the image to make it look sharper or softer. Gamma Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter. Brilliant Color This adjustable item utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing true, more vibrant colors in picture. The range is from “1” to “10”. If you prefer a stronger enhanced image, adjust toward the maximum setting. For a smoother, more natural image, adjust toward the minimum setting. Noise Reduction This function reduces electrical image noise caused by different media players. The higher the setting, the less the noise. Color Management The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you select each color, you can independently adjust its hue, saturation and gain according to your preference. Reset Color Settings Reset the Color Mode settings of the current input source to default values.
37 SOURCE Quick Auto Search Automatically scan through all the input source if the function in the OSD menu is On. The function will stop the signal auto scan process and fix the signal source you preferred if you turn Off the Quick Auto Search. 3D Settings This projector features a 3D function which enables you to enjoy the 3D movies, vid- eos, and sporting events in a more realistic way by presenting the depth of the images. You need to wear a pair of 3D glasses to view the 3D images. 3D Sync When you discover the inversion of the image depth, enable this function to correct the problem. 3D Sync Invert When you discover the inversion of the image depth, enable this function to correct the problem. Standby Settings Active VGA out Set whether the VGA out function works when the projector is in standby (powered off but connected to AC power). When selecting On, COMPUTER IN 1 will be output. When selecting Off, power consuption is under 0.5W. Active Audio out Set whether the audio out function works when the projector is in standby (powered off but connected to AC power). When selecting On, AUDIO IN1 will be output. AUDIO OUT port is also active (from AUDIO IN 1). When selecting Off, power consuption is under 0.5W. When selecting Off, both AUDIO IN and AUDIO OUT are Off. LAN Control Set whether the network function works when the projector is in standby (powered off but connected to AC power). Note • Less than o.5W power consumption when LAN Control is turned Off. • When Power Saving is On, the Active VGA out and Active Audio out settings are not available. Auto Power On Computer Selecting Enable the projector will turn on automatically when COMPUTER signal is detected.
38 CEC This projector supports CEC (Consumer Electronics Control) function for synchro- nized power on/off operation via HDMI connection. That is, if a device that also sup- ports CEC function is connected to the HDMI input of the projector, when the projector’s power is turned off, the power of the connected device will also be turned off automatically. When the power of the connected device is turned on, the projector’s power will be turned on automatically. Note • When connected to the HDMI input of the projector via an HDMI cable, and its CEC function is turned on. • Depending on the connected device, the CEC function may not work. • The function cant be enabled when Active VGA out/Active Audio out function is disabled. Direct Power On Selecting On the projector will turn on automatically after the power cord has been connected and power has been applied. Auto Power Off Power Saving The projector lowers the projector power if no input source is detected after 5 minutes to prevent unnecessary waste of lamp life. You can further decide if you would like the projector to turn off automatically after a set period of time. When Disable is selected, the projector power will be reduced to 30% after no signal is detected for 5 minutes. If you select 10 min, 20 min or 30 min, the projecter power will be reduced to 30% after no signal is detected for 5 minutes. And when 10 min, 20 min or 30 min is up, the projector will turn off automatically. Sleep Timer This function allows the projector to turn off automatically after a set period of time to prevent unnecessary waste of lamp life. Smart Restart It takes some time to initate this function. Make sure the projector has been turned on for more than 4 minutes. If the projector is resumed by using the Smart Restart fea- ture, this function can be executed immediately. Quick Power Off • Enable: Quick power on function speeds up the cooling process when turning off the projector. • Disable: Turn off with cooling procedure. Note • When Disable is selected, the Smart Restart function will be automatically turned Off.
39 LAN Control Settings Allow you to configure the wired LAN settings. Refer to page 44. • LAN Settings: • When selecting “DHCP on”, “Projector IP Address”, “Subnet Mask”, Default Gateway and DNS Server will be gray out. • When selecting Static IP, “Projector IP Address”, “Subnet Mask”, Default Gateway and DNS Server will be available. • Projector IP Address: Numerical address to identify networked computers. • The IP Address is the number that identifies this projector on the network. You cannot have two devices with the same IP Address on the same network. • The IP Address “0.0.0.0” is prohibited. • Subnet Mask: A numeric value to define the number of bits used for a network address of a divided network (or subnet) in an IP Address. • The Subnet Mask “0.0.0.0” is prohibited. • Default Gateway: A server (or router) to communicate across networks (subnets) that are divided by Subnet Mask. • DNS Server: Setup DNS server address when DHCP is disable. • Apply: Save and execute the wired LAN settings.