Home > ViewSonic > Projector > ViewSonic Projector PJD6230 User Manual

ViewSonic Projector PJD6230 User Manual

Here you can view all the pages of manual ViewSonic Projector PJD6230 User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 41

ViewSonic
34PJD6220/PJD6230/PJD6240
AppendixLED Indicator Messages
LED Type
Color
Status
Meaning
LAMP LED
TEMP LED Green
Off Flash
- The projector is in standby mode.
LAMP LED
TEMP LED Green
GreenSolid
Flash The projector system has some problems with
its fan, so the projector cannot start up.
LAMP LED
TEMP LED Green
GreenSolid
SolidThe lamp is in good condition and is projecting
at maximum brightness.
LAMP LED
TEMP LED Amber
Green Solid
SolidThe lamp has reached its end of life and must
be changed...

Page 42

ViewSonic35PJD6220/PJD6230/PJD6240

RS-232 Command and Configuration
RS232 Serial Remote Control Command 
Item Description Comment 
Baud Rate 19200 
Parity Bit none 
Data Bit 8 
Stop Bit 1 
Assign Port COM1 
Power On Command 
Send String BE, EF, 10, 05, 00, C6, FF, 11, 11, 01, 00, 01, 00 
Response 06 
Comment 
Power Off Command 
Send String BE, EF, 03, 06, 00, DC, DB, 69, 00, 00, 00, 00, 00 
Response 06 
Source Command 
Send String BE, EF, 02, 06, 00, 57, D0, 2E, 00, 00, 00, 00, 00 
Response 06 
Comment...

Page 43

ViewSonic36PJD6220/PJD6230/PJD6240

Down (for OSD) Command 
Send String BE, EF, 02, 06, 00, 0B, D2, 32, 00, 00, 00, 00, 00 
Response 06 
Comment 
Left (for OSD) Command 
Send String BE, EF, 02, 06, 00, DA, D3, 33, 00, 00, 00, 00, 00 
Response 06 
Comment 
Right (for OSD) Command 
Send String BE, EF, 02, 06, 00, 38, D2, 31, 00, 00, 00, 00, 00 
Response 06 
Comment 
Blank Screen Command 
Send String BE, EF, 02, 06, 00, DF, DF, 66, 00, 00, 00, 00, 00 
Response 06 
Comment 
Keystone Command 
Send String BE,...

Page 44

ViewSonic37PJD6220/PJD6230/PJD6240

ViewMatch Command
Send String BE,EF,03,06,00,38,5A,88,00,00,00,00,00
Response 6 
Comment 
Aspect Ratio Command 
Send String BE, EF, 03, 06, 00, 0D, DA, 68, 00, 00, 00, 00, 00 
Response 06 
Comment 
ECO On Command 
Send String BE, EF, 03, 06, 00, EF, DB, 6A, 00, 00, 00, 00, 00 
Response 06 
Comment 
ECO Off Command 
Send String BE, EF, 03, 06, 00, 3E, DA, 6B, 00, 00, 00, 00, 00 
Response 06 
Comment 
Auto Source On Command 
Send String BE, EF, 03, 06, 00, 89, DB, 6C,...

Page 45

ViewSonic38PJD6220/PJD6230/PJD6240

Firmware Version Command 
Send String BE, EF, 03, 06, 00, D5, D9, 70, 00, 00, 00, 00, 00 
Response Version 
Comment 
System Status Command 
Send String BE, EF, 03, 06, 00, 04, D8, 71, 00, 00, 00, 00, 00 
Response 03 :Projector ON (Normal Mode) 
Comment 
Volume Command 
Send String BE, EF, 02, 06, 00, F8, DC, 71, 00, 00, 00, 00, 00 
Response 06 
Comment 
Volume+ Command 
Send String BE, EF, 02, 06, 00, F1, DE, 68, 00, 00, 00, 00, 00 
Response 06 
Comment...

Page 46

ViewSonic39PJD6220/PJD6230/PJD6240

Change to S-Video Channel Command 
Send String BE, EF, 03, 19, 00, E8, 69, 01, 47, 02, CC, CC, 00 
Response 06 
Comment 
Change to Composite Video Channel Command 
Send String BE, EF, 03, 19, 00, 78, A8, 01, 47, 02, CC, CC, 00 
Response 06 
Comment 
Change to HDTV(Y-Pb-Pr) Channel Command 
Send String BE, EF, 03, 19, 00, DA, 2B, 01, 47, 02, CC, CC, 00 
Response 06 
Comment 
Change to Computer2(Analog RGB) Channel Command 
Send String BE, EF, 03, 19, 1E, 90, 72, 01,...

Page 47

ViewSonic
40PJD6220/PJD6230/PJD6240
Compatibility ModesComputer: 
Video: 
 
Compatibility
Resolution
H-Sync [KHz]
V-S ync [Hz]
VGA 640 x 480 31.5 59.9
37.9 72.8
37.5 75.0
43.3 85.0
SVGA 800 x 600 35.2 56.3 37.9 60.3
48.1 72.2
46.9 75.0
53.7 85.1
XGA 1024 x 768 48.4 60.0
56.5 70.1
60.0 75.0
68.7 85.0
SXGA 1152 x 864 64.0 70.0 67.5 75.0
1280 x 960 60.0 60.0
75.0 75.0
1280 x 1024 64.0 60.0
WXGA 1280 x 768 47.8 60.0
60.3 74.9
68.6 84.8
1280 x 800 49.7 59.8
62.8 74.9
Signal
Horizontal Frequency (kHz)...

Page 48

ViewSonic
41PJD6220/PJD6230/PJD6240
TroubleshootingRefer to the symptoms and measures listed below before sending the projector
forrepairs. If the problem persists, contact your local reseller or service center. Please
refer to Indicator Messages as well.Start-up problemsIf no lights turn on:„
Be sure that the power cord is securely connected to the projector and the other endis plugged into an outlet with power.
„
Press the power button again.
„
Unplug the power cord and wait for a short while, then...

Page 49

ViewSonic42PJD6220/PJD6230/PJD6240

Customer Support
For technical support or product service, see the table below or contact\
 your reseller.
Note : You will need the product serial number.
Country/RegionWeb SiteT=Telephone
F=FaxE-mail
Australia/New Zealandwww.viewsonic.com.auAUS=1800 880 818
NZ=0800 008 [email protected]
Canadawww.viewsonic.comT (Toll-Free)= 1-866-463-4775T (Toll)= 1-424-233-2533F= [email protected]
Europe/Middle East/Baltic countries/North...

Page 50

ViewSonic43PJD6220/PJD6230/PJD6240

Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers: 
ViewSonic warrants its products to be free from defects in material and w\
orkmanship, under 
normal use, during the warranty period. If a product proves to be defect\
ive in material or 
workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace 
the product with a like product. Replacement product or parts may includ\
e remanufactured or 
refurbished parts or...
Start reading ViewSonic Projector PJD6230 User Manual

Related Manuals for ViewSonic Projector PJD6230 User Manual

All ViewSonic manuals