ViewSonic Projector PJD6230 User Manual

ViewSonic24PJD6220/PJD6230/PJD6240

Control Panel
ItemDescription
Date Setting
Time Setting
Update date setting on the projector.
Update time setting on the projector.
Click “Enter” button to save the settings.
Projector NameShow projector name on the current projector.
PowerPower On or Power Off the projector via network.
Input SourceSelect input source.
Picture
BrightnessAdjusts the brightness setting.
ContrastAdjusts the contrast setting.
Color TemperatureSelects the color temperature setting....

ViewSonic25PJD6220/PJD6230/PJD6240

Video Image
ColorAdjusts the color setting.
TintAdjusts the tint setting.
SharpnessAdjusts the sharpness setting.
Audio
VolumeAdjusts the volume setting.
MuteEnable or disable the mute function.
Setting
Menu PositionAdjusts the menu position.
ProjectionSelects the projection setting.
Auto SourceEnable or disable the auto source function.
ECO modeEnable or disable the ECO function.
High AltitudeEnable or disable the high altitude function.
OSD TimeoutSelects the OSD...

ViewSonic26PJD6220/PJD6230/PJD6240

Network
ItemDescription
Network
DHCP
Assign an IP address to the projector from the DHCP server automatically.
ManualAssign an IP address manually.
IP Address Setup IP address when DHCP is disable.
Subnet Mask Setup subnet mask when DHCP is disable.
Gateway Setup gateway when DHCP is disable.
DNS Server Setup DNS server address when DHCP is disable.
Group Name Create projector group. (Max length: 6 characters)
Projector Name
Create projector naming of the current...

ViewSonic27PJD6220/PJD6230/PJD6240

Alert Setting
ItemDescription
Email Setting
ToSetup the mail alert attendee. (Max length: 40 characters)
CcSetup the backup mail alert attendee. (Max length: 40 characters)
SubjectSetup the subject of the alert e-mail. (Max length: 30 characters)
FromSetup the sender e-mail address. (Max length: 40 characters)
SMTP Setting
ServerTo enter the SMTP server (Mail server) name of the company.   
For example: mail.viewsonic.com (Max length: 30 characters)
User NameEnter...

ViewSonic28PJD6220/PJD6230/PJD6240

Schedule
The schedule function is divided into two scheduling categories, as show\
n below:
Weekly Schedule: defines the date of each week will execute the command
Click “Submit” button to create new schedule. To delete schedule, click “Cancel”.
Specific Day: defines the month and day that will execute the command.
Click “Submit” button to create new schedule. To delete schedule, click “Cancel”. 

ViewSonic29PJD6220/PJD6230/PJD6240

Logout: 

ViewSonic
30PJD6220/PJD6230/PJD6240
MaintenanceThe projector needs proper maintenance. You should keep the lens clean as dust, dirt
or spots will project on the screen and diminish image quality. If any other parts need
replacing, contact your dealer or qualified service personnel. When cleaning any part
of the projector, always switch off and unplug the projector first.
Warning:
Never open any of the covers on the projector. Dangerous electrical voltages inside
the projector can cause severe injury. Do...

ViewSonic
31PJD6220/PJD6230/PJD6240
Replacing the LampAs the projector operates over time, the brightness of the projector lamp gradually
decreases and the lamp becomes more susceptible to breakage. We recommend
replacing the lamp if a warning message is displayed. Do not attempt to replace the
lamp yourself. Contact the qualified service personnel for replacement.
„
The lamp becomes high temperature after turning off the projector with the 
power button. If you touch the lamp, you may scald your...

ViewSonic
32PJD6220/PJD6230/PJD6240
1. Turn off the projector.
2. If the projector is installed in a cei ling mount, remove it from the mount.
3. Unplug the power cord.
4. Loosen the screw in the side of the lamp cover and remove the cover.
5. Remove the screws from the lamp module, raise the handle, and lift out the  module.
6. Insert the new lamp module into the projector and tighten the screws.
7. Replace the lamp cover and tighten the screw.
8. Turn on the projector. If the lamp does not turn on...

Specifications
Display Type Single 0.55 DLP panel
Resolution (Pixels) XGA (1024 × 768)
Lens Manual Zoom (1.1x)
Screen Size 30” – 250”
Lamp PJD6220: 180W; PJD6230: 200W; PJD6240: 260W
Input / Output Source D-Sub 15 pin, S-video, composite video, USB, RS-232, Audio In, Audio Out, LAN (RJ-45 connector)
Speaker 10 W (5W x 2)
Video Compatibility NTSC 3.58, NTSC4.43 PA L - 6 0 ,  M ,  N
SECAM, HDTV (480i/p, 576i/p, 720p, 1080i)
Scanning Frequency
Horizontal Freq.
Vertical Freq. 31 - 79 KHz
50 - 85 Hz...