ViewSonic Projector PJD6230 User Manual

ViewSonic 14 PJD6220/PJD6230/PJD6240Menu OperationThe projector has multilingual on-screen display menus that allow you to make image
adjustments and change a variety of settings. 

ViewSonic 15 PJD6220/PJD6230/PJD6240How to operate1. Press 
the Menu  button on the control panel or the  MENU button on the remote
control to open the OSD menu.
2. When OSD is displayed, use 
S / T to select any feature in the main menu.
3.
After selecting the desired main menu feature, press 
X to enter sub-menu for
feature setting
.
4.
Adjust
 the settings with 
W / X.
5. Press 
the  Menu  button
on the control panel or the 
MENU
 button on the remote
control, the screen will return to the main...

ViewSonic 16 PJD6220/PJD6230/PJD6240GammaEffect the represent of dark scenery. With greater gamma value, dark scenery will look brighter.Computer Image (Computer Mode)Frequency
Adjust the timing of the projector relative to the computer.
Tracking
Adjust the phase of the projector relative to the computer.
H Position (Horizontal Position)
Adjust the image left or right within the projection area.
V Position (Vertical Position)
Adjust the image up or down within the projection area.Video Image (Video...

ViewSonic 17 PJD6220/PJD6230/PJD6240Lamp Counter
Display the lamp’s elapsed operating time (in hours).
Lamp Counter Reset
Reset the lamp counter to 0 hours.
Power Saving
If no operation is performed for a specific period of time, the power to the projector is
automatically turned off.
Auto Source
Automatically scan the input source.
ECO Mode
Use this function to dim the projector lamp light output which will lower power
consumption and increase lamp life.
High Altitude
Turning on High Altitude mode...

ViewSonic18PJD6220/PJD6230/PJD6240Network Control
Select either RS232 or LAN for network control. If RS 232 is selected, user will not able
to control the projector via LAN network and vice ve rsa.Network ConfigDHCP„
Enable: Assign an IP address to the projector from t he DHCP server  
automatically. 
„
Disable: Assign an IP address manually. 
IP Address
Select an IP address. 
Subnet Mask
Select subnet mask number. 
Gateway
Select the default gateway of the network conn ected to the projector. 
Language...

ViewSonic19PJD6220/PJD6230/PJD6240

Network Control
This feature provides the ability to remotely control and manage the pro\
jector through the network. 
Note: 1024x768 viewing resolution is recommended.
Preparation:
1. Connect one end of the internet cable to the LAN connector on projector.
2.  Connect the other end of the internet cable to an available LAN connector on the RJ45 outlet.
3.  Make sure the PC/NB is also connected to the internet.
4.  Turn on the projector and computer.
There are two...

ViewSonic20PJD6220/PJD6230/PJD6240

2. Select “Intel Protocol (TCP/IP)” and click “Properties”.
3. Set your IP address on your computer, and click OK.
●
 
Click 
“Use the following IP address”
●
 
IP address: 10.0.50.105, (set the last number different to the projector IP address).
●
 
Subnet mask: 255.255.0.0 

ViewSonic21PJD6220/PJD6230/PJD6240

4.    Enter “http://10.0.50.100/” into the address bar of the web browser and press “Enter” key or \
click “Go” button.
5.  After the connection is completed, the control screen will be as below
Authority on the network control of Administrator & User:
ItemDescriptionAdministratorUser
StatusShow current projector status and network 
configuration settings.√√
Date & Time SettingDate & Time setting by user.√×
Control PanelControl the projector via network.√√...

ViewSonic22PJD6220/PJD6230/PJD6240

Login
Enter “http://10.0.50.100/” into the address bar of the web browser and press “Enter” key or \
click “Go” button.
If the administrative and user password is disabled, it will directly go\
 into the Status page.
 
If the Administrative & User password is enabled
Select your User Name and enter password to login. 

ViewSonic23PJD6220/PJD6230/PJD6240

Status Information:
All screen images in this manual are shown when you login with the Administrator ID. The 
image will differ if you login with User ID.
ItemDescription
IP AddressShow current IP address.
Group NameShow group name.
Projector NameShow projector name.
System StatusShow if projector is Power On or Inactive *.
Input SourceShow current input source.
Lamp HoursShow lamp used hours on current projector.
Filter HoursShow filter used hours on current...