ViewSonic Projector PJ359W User Manual

PJ359WViewSonic36

SCREEN Menu
ItemDescription
MyScreen(continued)
When the registration is completed, the registered screen and the following message is displayed for several seconds:“MyScreen registration is finished.”If the registration failed, the following message is displayed:“A capturing error has occurred. Please try again.” • This function cannot be selected when the TURN ON is selected to the MyScreen Lock item (below).• This function cannot be selected when the TURN ON is selected to the...

ViewSonic37PJ359W

SCREEN Menu
ItemDescription
SOURCE NAME
Each input port for this projector can have a name applied to it.(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE NAME menu to select the port to be named and press the ► button. Right side of the menu is blank until a name is specified.The SOURCE NAME dialog will be displayed.
(3) The current name will be displayed on the first...

PJ359WViewSonic38

OPTION Menu
OPTION Menu
ItemDescription
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search function.
TURN ON ó TURN OFF
When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. 
   COMPUTER IN1 ð COMPUTER IN2
   VIDEO  S-VIDEO  HDMI
AUTO 
KEYSTONE 
Using the ▲/▼ buttons...

ViewSonic39PJ359W

ItemDescription
AUTO OFF
Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off.
Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed...

PJ359WViewSonic40

ItemDescription
MY BUTTON
This item is to assign one of the following function to MY BUTTON 1 and 2 on the remote control (5).Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.• COMPUTER2: Sets port to COMPUTER IN2.• HDMI: Sets port to HDMI• S-VIDEO: Sets port to S-VIDEO.• VIDEO: Sets port to VIDEO.• INFORMATION: Displays a dialog of INPUT...

ViewSonic41PJ359W

ItemDescription
SERVICE
(continued)
AUTO ADJUSTUsing the ▲/▼ buttons enables/disables the automatic adjustment. When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting.
FINE ó FAST ó DISABLE      
FINE: Finer tuning including H.SIZE adjustment.
FAST:  Faster tuning, setting H.SIZE to prearranged data for the 
input signal
• Depending on conditions, such as input image, signal cable to...

PJ359WViewSonic42

ItemDescription
SERVICE(continued)
KEY LOCKUsing  the  ▲/▼  buttons  turns  on/off  the  key  lock  feature.  When TURN  ON  is  selected,  the  buttons  on  the  projector  except  the STANDBY/ON button are locked.TURN ON ó TURN OFF• Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.
REMOTE FREQ.Use the ▲/▼ button to change the Projector's remote sensor setting.
1:NORMAL ó 2:HIGH
Items with a checkmark are on....

ViewSonic43PJ359W

ItemDescription
SECURITY
This projector is equipped with security functions.User registration is required before using the security functions.Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER PASSWORD box will be displayed.The factory default PASSWORD is 4006. This PASSWORD can be changed (1.2 Changing the PASSWORD). • It is strongly recommended the...

PJ359WViewSonic44

ItemDescription
SECURITY(continued)
1.3 If you have forgotten your PASSWORD
1.3-1  Follow the procedure in 1.1-1 to display the ENTER PASSWORD BOX.
1.3-2   While the ENTER PASSWORD BOX is 
displayed, press and hold the RESET button for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 secondsThe 10 digit Inquiring Code will be displayed. • If there is no key input for about 55 seconds while the Inquiring Code is displayed the menu will close. If...

ViewSonic45PJ359W

ItemDescription
SECURITY(continued)
2.2-4  Move the cursor to the right side of the CHECK PASSWORD BOX and press the ► button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. Pressing the ENTER button will return to MyScreen PASS WORD on/off menu.When a PASSWORD is set for MyScreen:
• The MyScreen registration function (and menu) will be unavailable.
• The MyScreen Lock function (and menu) will be unavailable.
• The START UP setting will...