ViewSonic Projector PJ359W User Manual
Here you can view all the pages of manual ViewSonic Projector PJ359W User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
PJ359WViewSonic26 IMAGE Menu IMAGE Menu ItemDescription ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio. For a PC signalNORMAL ó 4:3 ó 16:9 ó 16:10 ó REAL For an HDMI signalNORMAL ó 4:3 ó 16:9 ó 16:10 ó 14:9 ó REAL For a Video signal, s-video signal or component video signal4:3 ó 16:9 ó 16:10 ó 14:9 ó REAL For no signal16:10 (fixed)• This item can be selected only for a proper signal.• The NORMAL mode keeps the original aspect ratio setting.• Performing the automatic...
Page 32
ViewSonic27PJ359W IMAGE Menu ItemDescription H PHASE Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker. Right ó Left • This item can be selected only for a computer signal or component video signal. H SIZE Using the ▲/▼ buttons adjusts the horizontal size. Large ó Small • This item can be selected only for a computer signal.• When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button...
Page 33
PJ359WViewSonic28 INPUT Menu INPUT Menu ItemDescription PROGRESSIVE Using the ▲/▼ buttons switches the progress mode. TV ó FILM ó TURN OFF • This function is performed only for an interlaced signal of a video, s-video or component video of 525i (480i) or 625i (576i) signal. • When TV or FILM is selected, the screen image will be sharp. FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick moving object. In such a...
Page 34
ViewSonic29PJ359W ItemDescription VIDEO FORMAT Set the video format for the s-video port and video port.(1) Use the ◄/► buttons to select the input port.(2) Using the ▲/▼ buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4.43 • This item is performed only for a video signal from the VIDEO port or the S-VIDEO port. • The AUTO mode automatically selects the optimum mode.• The AUTO operation may not work well for some signals. If the picture becomes...
Page 35
PJ359WViewSonic30 INPUT Menu ItemDescription RESOLUTION The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button.The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu, select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal. (3) Pressing the ► or ENTER button when selecting a STANDARD...
Page 36
ViewSonic31PJ359W SETUP Menu SETUP Menu ItemDescription AUTO KEYSTONE EXECUTE Selecting this item performs the automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself. This function will be executed only once when selected in the menu. When the slant of the projector is changed, execute this function again. • The adjustable range for correction will vary among inputs. For some input, this function may...
Page 37
PJ359WViewSonic32 SETUP Menu SETUP Menu (continued) ItemDescription WHISPER Using the ▲/▼ buttons turns off/on the whisper mode. NORMAL ó WHISPER • When the WHISPER is selected, acoustic noise and screen brightness are reduced. MIRROR Using the ▲/▼ buttons switches the mode for mirror status. NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (47) will be displayed when projector is restarted after the power switch...
Page 38
ViewSonic33PJ359W AUDIO Menu AUDIO Menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table. ItemDescription VOLUMEUsing the ▲/▼ buttons adjusts the volume. High ó Low AUDIO The combination of a picture and audio input port can be arranged in the menu.The audio coming into the port selected in the (2) is output while...
Page 39
PJ359WViewSonic34
SCREEN Menu
SCREEN Menu
ItemDescription
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
SUOMI ó POLSKI ó TÜRKÇE
ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO
NORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語
ó ó ó SVENSKA ó
MENU POSITIONUsing the ▲/▼/◄/► buttons adjusts the menu position.To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds.
BLANK
Using the ▲/▼ buttons switches the mode for the...
Page 40
ViewSonic35PJ359W SCREEN Menu ItemDescription START UP Using the ▲/▼ buttons switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature MyScreenScreen can be registered by the MyScreen item (35). ORIGINALScreen preset as the standard screen. TURN OFFPlain black screen. • To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen (34) after...