ViewSonic Projector PJ359W User Manual

							
PJ359WViewSonic36

SCREEN Menu
ItemDescription
MyScreen(continued)
When the registration is completed, the registered screen and the following message is displayed for several seconds:“MyScreen registration is finished.”If the registration failed, the following message is displayed:“A capturing error has occurred. Please try again.” • This function cannot be selected when the TURN ON is selected to the MyScreen Lock item (below).• This function cannot be selected when the TURN ON is selected to the MyScreen PASSWORD of SECURITY item in OPTION menu (44).
MyScreen Lock
Using the ▲/▼ buttons turns on/off the MyScreen lock function.TURN ON ó TURN OFFWhen the TURN ON is selected, the MyScreen item is locked. Use this function for protecting the current MyScreen.• This function cannot be selected when the TURN ON is selected to the MyScreen PASSWORD of SECURITY item in OPTION menu (44).
MESSAGE
Using the ▲/▼ buttons turns on/off the message function.
TURN ON ó TURN OFF
When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting“NO INPUT IS DETECTED”“SYNC IS OUT OF RANGE”“Searching….” while searching for the input“Detecting….” while an input signal is detectedThe indication of the input signal displayed by changing The indication of the aspect ratio displayed by changingThe indication of the PICTURE MODE displayed by changingThe indication of the MY MEMORY displayed by changingThe indication of “FREEZE” and “II” while freezing the screen by pressing the FREEZE button.• When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (19).
SCREEN Menu (continued)
(continued on next page) 
						

							
ViewSonic37PJ359W

SCREEN Menu
ItemDescription
SOURCE NAME
Each input port for this projector can have a name applied to it.(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE NAME menu to select the port to be named and press the ► button. Right side of the menu is blank until a name is specified.The SOURCE NAME dialog will be displayed.
(3) The current name will be displayed on the first line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to erase 1 character at a time. The name can be a maximum of 16 characters.
(4) To change an already inserted character, press the ▲ button while the cursor is on the [A-N] row to move the cursor to the name displayed on the first line and use the ◄/► buttons to select character to be changed. Once a character in the name is selected use the ▼ button to move the cursor back down to the character entry area to select and enter characters as described above.
(5) Select  and press the ENTER or INPUT buttons when finished entering text.To revert to the previous name without saving changes press the ESC or ◄ button and the INPUT button simultaneously.
TEMPLATE
Using ▲/▼ buttons switches the mode for the template screen. The 
selected template pattern can be displayed when the MY BUTTON 
allocated to the TEMPLATE function is pressed (40).
DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2 
                            
          TEST PATTERN ó DOT-LINE1 
SCREEN Menu (continued) 
						

							
PJ359WViewSonic38

OPTION Menu
OPTION Menu
ItemDescription
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search function.
TURN ON ó TURN OFF
When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. 
   COMPUTER IN1 ð COMPUTER IN2
   VIDEO  S-VIDEO  HDMI
AUTO 
KEYSTONE 
Using the ▲/▼ buttons turns on/off the automatic keystone function.
TURN ON ó TURN OFF
TURN ON : Automatic keystone distortion correction will be executed whenever changing the slant of the projector.TURN OFF : This function is disabled. Please execute the AUTO KEYSTONE  EXECUTE in the SETUP Menu for automatic keystone distortion correction.• When the projector is suspended from the ceiling this feature will not function properly so select the TURN OFF.• This function will be unavailable when the Transition Detector is on (47).
AUTO ON
Using the ▲/▼ buttons turns on/off the AUTO ON function.
TURN ON ó TURN OFF
When set to the TURN ON, the lamp in projector will be automatically turned on without the usual procedure (13), only when the projector is supplied with the power after the power was cut while the lamp was on.• This function does not work as long as the power has been supplied to the projector while the lamp is off.• After turning the lamp on by the AUTO ON function, if neither input nor operation is detected for about 30 minutes, the projector is turned off, even though the AUTO OFF function (39) is disabled.
From  the  OPTION  menu,  items  shown  in  the  table  below  can  be performed.Select  an  item  using  the  ▲/▼  cursor  buttons,  and  press  the  ► cursor button or ENTER button to execute the item, except for the items  LAMP  TIME  and  FILTER  TIME.  Then  perform  it  according to the following table.
(continued on next page) 
						

							
ViewSonic39PJ359W

ItemDescription
AUTO OFF
Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off.
Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed or one of the commands (except get commands) is transmitted to the control port during the corresponding time, projector will not be turned off.Please refer to the section “Turning off the power” (13).
LAMP TIME
The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp.Pressing the RESET button or the ► button displays a dialog.
To reset the lamp time, select the RESET using the ▲ button.
RESET  CANCEL
• Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.• For the lamp replacement, see the section "Lamp" (52).
FILTER TIME
The filter time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the air filter.Pressing the RESET button or the ► button displays a dialog. 
To reset the filter time, select the RESET using the ▲ button.
RESET  CANCEL
• Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter.• For the air filter cleaning, see the section "Air filter" (54).
OPTION Menu
OPTION Menu (continued)
(continued on next page) 
						

							
PJ359WViewSonic40

ItemDescription
MY BUTTON
This item is to assign one of the following function to MY BUTTON 1 and 2 on the remote control (5).Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.• COMPUTER2: Sets port to COMPUTER IN2.• HDMI: Sets port to HDMI• S-VIDEO: Sets port to S-VIDEO.• VIDEO: Sets port to VIDEO.• INFORMATION: Displays a dialog of INPUT INFORMATION (42).• AUTO KEYSTONE  : Performs automatic keystone distortion correction (31).
•   MY MEMORY: Loads one of adjustment data stored (25).
If you want to keep the current adjustment, please press the ◄ button to quit. Otherwise the current adjusted condition will be lost by loading a data .• PICTURE MODE: Changes the PICTURE MODE (21).• FILTER RESET: Displays the filter time reset confirmation dialogue (39).• AV MUTE: Turns the picture and audio on/off.
•   TEMPLATE: Makes the template pattern selected to the 
TEMPLATE item (37) appear or disappear.
MY SOURCE
Using ▲/▼ buttons selects the picture input port to be selected with pressing the MY SOURCE/DOC.CAMERA button on the remote control.Select the picture input that is connected with a document camera.
SERVICE
Selecting this item displays the SERVICE menu.Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button to execute the item.
FAN SPEED ó AUTO ADJUST ó GHOST ó FILTER MESSAGE ó KEY LOCK
FACTORY RESET  ó I NFORMATION  ó  REMOTE FREQ. 
FANSPEEDUsing the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected.
HIGH ó NORMAL
OPTION Menu (continued)
OPTION Menu
(continued on next page)
When the current adjustment is not saved to memory a dialog is displayed. 
When no data is saved in memory, a dialog is displayed.
COMPUTER 1 ð COMPUTER 2(COMPUTER IN1)      (COMPUTER IN2)
VIDEO  S-VIDEO  HDMI 
						

							
ViewSonic41PJ359W

ItemDescription
SERVICE
(continued)
AUTO ADJUSTUsing the ▲/▼ buttons enables/disables the automatic adjustment. When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting.
FINE ó FAST ó DISABLE      
FINE: Finer tuning including H.SIZE adjustment.
FAST:  Faster tuning, setting H.SIZE to prearranged data for the 
input signal
• Depending on conditions, such as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not work correctly.  In such a case, please choose DISABLE to disable the automatic adjustment, and make adjustment manually.
GHOST
1.  Select a color element of ghost using the ◄/► 
buttons. 
2.    Adjust the selected element using the ▲/▼ 
buttons to disappear ghost.
FILTER MESSAGEUse the ▲/▼ button to set the timer for the interval to show the message for cleaning up the air filter. 
50h ó 100h ó 200h ó 300h ó 400h ó 500h
      TURN OFF ó 800h ó 700h ó 600h
After choosing an item except TURN OFF, the message “REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK” will appear after the timer reaches the interval time set by this feature (56). When the TURN OFF is chosen, the message will not appear. Utilize this feature to keep the air filter clean, setting the suitable time according to your environment of this projector.• Please check and clean the air filter periodically, even if there is no message. If the air filter becomes to be blocked by dust or others, the internal temperature will rise, which could cause malfunction, or reduce the lifetime of the projector.• Please be careful with the operating environment of the projector and the condition of the air filter.
OPTION Menu (continued)
OPTION Menu
(continued on next page) 
						

							
PJ359WViewSonic42

ItemDescription
SERVICE(continued)
KEY LOCKUsing  the  ▲/▼  buttons  turns  on/off  the  key  lock  feature.  When TURN  ON  is  selected,  the  buttons  on  the  projector  except  the STANDBY/ON button are locked.TURN ON ó TURN OFF• Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.
REMOTE FREQ.Use the ▲/▼ button to change the Projector's remote sensor setting.
1:NORMAL ó 2:HIGH
Items with a checkmark are on. The factory default setting is for both 1:NORMAL and 2:HIGH to be on.  If the remote control does not function correctly set this to either only 1 or only 2 (12).Neither can be turned off at the same time.
INFORMATIONSelecting this item displays a dialog titled “INPUT INFORMATION”. It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock function is working. 
• This item can't be selected for no signal and sync out.
FACTORY RESETSelecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE and SECURITY are not reset.
RESET  CANCEL
OPTION Menu (continued)
OPTION Menu
(continued on next page) 
						

							
ViewSonic43PJ359W

ItemDescription
SECURITY
This projector is equipped with security functions.User registration is required before using the security functions.Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER PASSWORD box will be displayed.The factory default PASSWORD is 4006. This PASSWORD can be changed (1.2 Changing the PASSWORD). • It is strongly recommended the factory default PASSWORD to be changed as soon as possible.
1.1-2  Use the ▲/▼/◄/► buttons to enter the 
registered PASSWORD. Move the cursor to the right side of the ENTER PASSWORD BOX and press the ► button to display the SECURITY menu.  If an incorrect PASSWORD is input the ENTER PASSWORD BOX will be displayed again. If incorrect PASSWORD is input 3 times the projector will turn off. Afterwards the projector will turn off every time an incorrect PASSWORD is input.
1.2 Changing the PASSWORD
1.2-1  Use the ▲/▼ buttons on the SECURITY menu to select SECURITY PASSWORD CHANGE and press the ► button to display the ENTER NEW PASSWORD BOX.
1.2-2   Use the ▲/▼/◄/► buttons to enter the new 
PASSWORD.
1.2-3   Move the cursor to the right side of the 
ENTER NEW PASSWORD BOX and press the ► button to display the NEW PASSWORD AGAIN BOX, enter the same PASSWORD again. 
1.2-4   Move the cursor to the right side of the NEW 
PASSWORD AGAIN BOX and press the ► button and the NOTE NEW PASSWORD BOX will be displayed for about 20 seconds, please make note of the PASSWORD during this time.  Pressing the ENTER button will close the NOTE NEW PASSWORD BOX.• Please do not forget your PASSWORD.
OPTION Menu (continued)
OPTION Menu
(continued on next page) 
						

							
PJ359WViewSonic44

ItemDescription
SECURITY(continued)
1.3 If you have forgotten your PASSWORD
1.3-1  Follow the procedure in 1.1-1 to display the ENTER PASSWORD BOX.
1.3-2   While the ENTER PASSWORD BOX is 
displayed, press and hold the RESET button for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 secondsThe 10 digit Inquiring Code will be displayed. • If there is no key input for about 55 seconds while the Inquiring Code is displayed the menu will close. If necessary repeat the process from 1.3-1.
1.3-3  Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD 
will be sent after your user registration information is confirmed.
2. Using the MyScreen PASSWORD Function
The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten.
2.1 Turning on the MyScreen PASSWORD 
Function
2.1-1  Use the ▲/▼ buttons on the SECURITY menu to select MyScreen PASSWORD and press the ► button to display the MyScreen PASSWORD on/off menu.
2.2 Setting the PASSWORD
2.2-1  Display the MyScreen on/off menu using the procedure in 2.1-1.
2.2-2   Use the ▲/▼ buttons on the MyScreen 
PASSWORD on/off menu to select TURN ON.The ENTER PASSWORD BOX (small) will be displayed.
2.2-3  Use the ▲/▼/◄/► buttons to enter the 
PASSWORD.  Move the cursor to the right side of the ENTER PASSWORD BOX (small) and press the ► button to display the CHECK PASSWORD BOX, enter the same PASSWORD again.
OPTION Menu (continued)
OPTION Menu
(continued on next page) 
						

							
ViewSonic45PJ359W

ItemDescription
SECURITY(continued)
2.2-4  Move the cursor to the right side of the CHECK PASSWORD BOX and press the ► button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. Pressing the ENTER button will return to MyScreen PASS WORD on/off menu.When a PASSWORD is set for MyScreen:
• The MyScreen registration function (and menu) will be unavailable.
• The MyScreen Lock function (and menu) will be unavailable.
• The START UP setting will be locked on MyScreen (and the menu will be unavailable).Turning the MyScreen PASSWORD off will allow normal operation of both  functions.
• Please do not forget your MyScreen PASSWORD.
2.3 Turning the PASSWORD off
2.3-1  Follow the procedure in 2.1-1 to display the MyScreen PASSWORD on/off menu.
2.3-2   Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter the registered PASSWORD and the screen will return to the MyScreen on/off menu.If an incorrect PASSWORD is input the menu will close. If necessary repeat the process from 2.3-1.
2.4 If you have forgotten your PASSWORD
2.4-1  Follow the procedure in 2.1-1 to display the MyScreen PASSWORD on/off menu.
2.4-2   Select TURN OFF to display the ENTER 
PASSWORD BOX (large). The 10 digit Inquiring Code will be displayed inside the BOX.
2.4-3   Contact your dealer with the 10 digit Inquiring 
Code. Your PASSWORD will be sent after your user registration information is confirmed.
3. Using the PIN LOCK FunctionPIN LOCK is a function which prevents the projector from being used unless a registered Code is input.3.1 Registering the PIN Code
3.1-1  Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/off menu.
OPTION Menu (continued)
OPTION Menu
(continued on next page)