ViewSonic Pjl9371 Projector User Manual

PJL9371ViewSonic36
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table 
below can be performed. Select an item using the ▲
/▼ cursor buttons, and press the ► cursor (or the 
ENTER) button to execute the item. Then perform it 
according to the following table.
ItemDescription
VOLUMEUsing the ◄/► cursor buttons adjusts the volume.
High ó Low
SPEAKER
Using the ▲/▼ cursor buttons turns on/off the built-in speaker.
ON ó OFF
When the OFF is selected, the built-in speaker does not work.
AUDIO...

PJL9371ViewSonic37

SCREEN menu

SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
ItemDescription
LANGUAGE
Using the ▲/▼/◄/► cursor buttons switches the OSD (On Screen Display) language.
ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL...  (shown in the LANGUAGE dialog)
Press the ENTER (or the INPUT) button to save the...

PJL9371ViewSonic38

SCREEN menu

ItemDescription
MyScreen
This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and the START UP screen. Display the image you want to capture before executing the following procedure.
1.  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from the current screen.
Please wait for the target image to be displayed, and press the 
ENTER (or the INPUT) button when the...

PJL9371ViewSonic39

SCREEN menu

ItemDescription
MyScreen Lock
Using the ▲/▼ cursor buttons turns on/off the MyScreen lock function.
ON ó OFF
When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in the SECURITY menu.
MESSAGE
Using the ▲/▼ cursor buttons turns on/off the message function.
ON ó OFF
When the ON is selected, the following message function works....

PJL9371ViewSonic40

SCREEN menu

ItemDescription
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1)  
Use the ▲/▼ cursor buttons on the SCREEN menu to select the SOURCE NAME and press the ► cursor (or the ENTER) button.  The SOURCE NAME menu will be displayed.
(2)   Use the ▲/▼ cursor buttons on the 
SOURCE NAME menu to select the port to be named and press the ► cursor button. Right side of the menu is blank until a name is specified. The SOURCE NAME dialog will be...

PJL9371ViewSonic4

SCREEN menu
ItemDescription
C.C.(Closed Caption)
The C.C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function.It may not work properly, depending on equipment or signal source. In this case, please turn off the Closed Caption.
DISPLAY
Select the Closed Caption...

PJL9371ViewSonic4

OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, 
and press the ► cursor (or the ENTER) button to 
execute the item, except for the items LAMP TIME 
and FILTER TIME. Then perform it according to the 
following table.
ItemDescription
AUTO SEARCH
Using the ▲/▼ cursor buttons turns on/off the automatic signal search function.
ON ó OFF
When the ON is selected, detecting no signal automatically...

PJL9371ViewSonic43

OPTION menu

ItemDescription
AUTO OFF
Using the ▲/▼ cursor buttons adjusts the time to count down to automatically turn the projector off.
Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote...

PJL9371ViewSonic44

OPTION menu

ItemDescription
MY BUTTON
This item is to assign one of the following functions to the MY BUTTON 1/2 on the remote control.
(1)   Use the ▲/▼ cursor buttons on the MY BUTTON menu to select 
a MY BUTTON - (1/2) and press the ► cursor (or the ENTER) 
button to display the MY BUTTON setup dialog. 
(2)   Then using the ▲/▼/◄/► cursor buttons sets one of the 
following functions to the chosen button. Press the ENTER (or the INPUT) button to save the setting.
• COMPUTER IN1:...

PJL9371ViewSonic45

OPTION menu

ItemDescription
SERVICE
Selecting this item displays the SERVICE menu.Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button on the remote control to execute the item.
FAN SPEED
Using the ▲/▼ cursor buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected.
HIGH ó NORMAL
AUTO ADJUST
Using the ▲/▼ cursor buttons to select one of the...