ViewSonic Pjl9371 Projector User Manual

PJL9371ViewSonic6

VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCHBLANK
MUTEMY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTERMY SOURCE/
AUTO
MAGNIFYPAGE      UPVOLUME
DOWNo
ON
OFF
9×FREEZE

Operating
1.Press the VIDEO button on the remote control.  
Each time you press the button, the projector switches its 
input port from the current port as below.
Selecting an input signal (continued)
●  
While ON is selected for AUTO SEARCH item in OPTION 
menu, the projector will keep checking every port...

PJL9371ViewSonic7

1.Press the ASPECT button on the remote control.   
Each time you press the button, the projector switches the 
mode for aspect ratio in turn. 
Selecting an aspect ratio
● The ASPECT button does not work when no proper signal is inputted.
● The NORMAL mode keeps the original aspect ratio setting.
1.Press the SEARCH button on the remote control.
The projector will start to check its input ports as below in 
order to find any input signals.
When an input is found, the projector...

PJL9371ViewSonic8

;00.0$64

Operating
Adjusting the projector's elevator
When the place to put the projector is slightly uneven to the left or right, use the 
elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 12 degrees.This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is adjustable while pushing the elevator button on the...

PJL9371ViewSonic9

Operating
1.Press the POSITION button on the remote control when no 
menu is indicated. 
The “POSITION” indication will appear on the screen.
Adjusting the position
2.Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press the RESET button 
on the remote control during the operation.
To complete this operation, press the POSITION button again. 
Even if you do not do anything, the dialog will automatically 
disappear after a few...

PJL9371ViewSonic0

Operating
• The zoom level can be finely adjusted. Closely watch the screen to 
find the level you want.
NOTE
1.Press the ON button of the MAGNIFY on the remote control.  
The “MAGNIFY” indication will appear on the screen and the 
projector will go into the MAGNIFY mode. When the ON button 
of the MAGNIFY is pressed first after the projector is started, 
the picture will be zoomed twice. The indication will disappear 
in several seconds with no operation.
Using the magnify...

PJL9371ViewSonic

Operating
1.Press the BLANK button on the remote control.  
The BLANK screen will be displayed instead of the screen of 
input signal. Please refer to the BLANK item in the SCREEN 
menu.
To exit from the BLANK screen and return to the input signal 
screen, press the BLANK button again. 
Temporarily blanking the screen
●  
The projector automatically exits from the BLANK mode when 
some control buttons are pressed.
• The sound is not connected with the BLANK screen function....

PJL9371ViewSonic

SECURITY
POWER
TEMP
LAMP
MENUINPUTSTANDBY/ON

Operating
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. The EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. If you want to change it to the ADVANCED 
MENU, select the ADVANCED MENU.
(2)   Use the ◄/► cursor buttons to operate the item.
This projector has the following menus:...

PJL9371ViewSonic3
Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select the EXIT and 
press the ◄ cursor (or the ENTER) button. Even if you do not do anything, 
the dialog will automatically disappear after about 30 seconds.
●   If you want to move the menu position, use the cursor buttons after pressing the 
POSITION button.
●   Some functions cannot be performed when a certain input port is selected, or 
when a certain input signal is displayed....

PJL9371ViewSonic4

EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
ItemDescription
ASPECTUsing the ◄/► cursor buttons switches the mode for aspect ratio.See the ASPECT item in the IMAGE menu.
AUTO KEYSTONE (EXECUTE)
Using the ► cursor (or the ENTER) button executes the auto keystone function.See the AUTO KEYSTONE (EXECUTE) item in the SETUP menu.
 KEYSTONEUsing...

PJL9371ViewSonic5

EASY MENU
ItemDescription
ECO MODEUsing the ◄/► cursor buttons turns off/on the eco mode.See the ECO MODE item in the SETUP menu.
MIRRORUsing the ◄/► cursor buttons switches the mode for mirror status.See the MIRROR item in the SETUP menu.
RESET
Performing this item resets all of the EASY MENU items except the FILTER TIME and the LANGUAGE.A dialog is displayed for confirmation. Selecting the OK using the ► cursor button performs resetting.
FILTER TIME
The usage time of the air...