ViewSonic Pjl9371 Projector User Manual

PJL9371ViewSonic6

PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
ItemDescription
BRIGHTNESSUsing the ◄/► cursor buttons adjusts the brightness.Dark ó Light
CONTRASTUsing the ◄/► cursor buttons adjusts the contrast.Weak ó Strong
GAMMA
Using the ▲/▼ cursor buttons switches the gamma...

PJL9371ViewSonic7

PICTURE menu

ItemDescription
COLOR TEMP
Using the ▲/▼ cursor buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes the CUSTOM and then pressing the ► cursor (or the ENTER) button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.The OFFSET adjustments change the color intensity on the whole tones of the test pattern.GAIN adjustments mainly affect color intensity on the brighter tones of the test...

PJL9371ViewSonic8

PICTURE menu

ItemDescription
ACTIVE IRIS
Using the ▲/▼ cursor buttons changes the active iris control mode.
PRESENTATION  ó  THEATER  ó  OFF              
PRESENTATION :  The active iris displays the best presentation image for both bright and dark scenes.THEATER  :  The active iris displays the best theater image for both bright and dark scenes.OFF  :  The active iris is always open.
• The screen may flicker when the PRESENTATION or the THEATER modes are selected. If this...

PJL9371ViewSonic9

IMAGE menu

IMAGE menu
From the IMAGE menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
ItemDescription
ASPECT
Using the ▲/▼ cursor buttons switches the mode for aspect ratio. 
For a computer signal
NORMAL ó 4:3 ó 16:9 ó 16:10          
For a video signal, s-video signal or component video signal
4:3 ó 16:9 ó...

PJL9371ViewSonic30

IMAGE menu

ItemDescription
H PHASE
Using the ◄/► cursor buttons adjusts the horizontal phase to eliminate flicker.
Right ó Left
• This item can be selected only for a computer signal or a component video signal.
H SIZE
Using the ◄/► cursor buttons adjusts the horizontal size.
Small ó Large
• This item can be selected only for a computer signal.• When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the...

PJL9371ViewSonic3

INPUT menu

INPUT menu
From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
ItemDescription
PROGRESSIVE
Using the ▲/▼ cursor buttons switches the progress mode.
TV ó FILM ó OFF  
• This function is performed only for a video signal, s-video signal or component video signal of 480i@60 or 576i@50.• When...

PJL9371ViewSonic3

INPUT menu

ItemDescription
VIDEO FORMAT
The video format for the S-VIDEO port and the VIDEO port can be set.
(1)  Use the ▲/▼ cursor buttons 
to select the input port.
S-VIDEO ó VIDEO
(2)   Using the ◄/► cursor 
buttons switches the mode for video format.
AUTO  ó  NTSC  ó  PAL  ó  SECAM
      N-PAL ó M-PAL ó NTSC4.43 
• This item is performed only for a video signal from the VIDEO port or the S-VIDEO port.• The AUTO mode automatically selects the optimum mode.• The AUTO...

PJL9371ViewSonic33

INPUT menu
ItemDescription
RESOLUTION
The resolution for the COMPUTER IN1 and the COMPUTER IN2 input signals can be set on this projector.
In the RESOLUTION menu select the resolution you wish to display 
using the ▲/▼ cursor buttons. 
■AUTO
  Selecting AUTO will set a resolution 
appropriate to the input signal.
■STANDARD
  Pressing the ► cursor (or the 
ENTER) button when selecting a STANDARD resolution will automatically adjust the horizontal and vertical positions, clock phase...

PJL9371ViewSonic34

SETUP menu
SETUP menu
From the SETUP menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) buttonn to 
execute the item. Then perform it according to the 
following table.
ItemDescription
AUTO KEYSTONE (EXECUTE)
Selecting this item performs the Automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by...

PJL9371ViewSonic35

SETUP menu
ItemDescription
MIRROR
Using the ▲/▼ cursor buttons switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT    
If the Transition Detector is on and the MIRROR status is changed, the TRANSITION DETECTOR ON alarm will be displayed when projector is restarted after the AC power is turned off.
STANDBY MODE
Using ▲/▼ cursor buttons switches the standby mode setting between the NORMAL and the SAVING. 
NORMAL ó SAVING
When the SAVING is selected, the power...