ViewSonic Pjd6230 Projector User Manual
Have a look at the manual ViewSonic Pjd6230 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ViewSonic 34PJD6220/PJD6230/PJD6240 AppendixLED Indicator Messages LED Type Color Status Meaning LAMP LED TEMP LED Green Off Flash - The projector is in standby mode. LAMP LED TEMP LED Green GreenSolid Flash The projector system has some problems with its fan, so the projector cannot start up. LAMP LED TEMP LED Green GreenSolid SolidThe lamp is in good condition and is projecting at maximum brightness. LAMP LED TEMP LED Amber Green Solid SolidThe lamp has reached its end of life and must be changed soon. The lamp will continue to operate until it fails. Change the lamp. If the lamp is off, then the ballast will become malfunction. LAMP LED TEMP LED Amber AmberSolid SolidThe projector is shutting and the fan motor is cooling the lamp for shutdown. Do not unplug the power cord or turn the power off before the Lamp LED changes to flashing. The fan motor will turn off when the lamp has cooled. LAMP LED TEMP LED Green Red Solid Flash Temperature is too high. The lamp will turn off. The fan motor is cooling the lamp. LAMP LED TEMP LED Amber Off Solid - The lamp ignition failed. If temperature is too high, the fans will cool the lamp.
ViewSonic35PJD6220/PJD6230/PJD6240 RS-232 Command and Configuration RS232 Serial Remote Control Command Item Description Comment Baud Rate 19200 Parity Bit none Data Bit 8 Stop Bit 1 Assign Port COM1 Power On Command Send String BE, EF, 10, 05, 00, C6, FF, 11, 11, 01, 00, 01, 00 Response 06 Comment Power Off Command Send String BE, EF, 03, 06, 00, DC, DB, 69, 00, 00, 00, 00, 00 Response 06 Source Command Send String BE, EF, 02, 06, 00, 57, D0, 2E, 00, 00, 00, 00, 00 Response 06 Comment Auto-Sync Command Send String BE, EF, 02, 06, 00, 86, D1, 2F, 00, 00, 00, 00, 00 Response 06 Comment Menu(for OSD) Command Send String BE, EF, 02, 06, 00, E9, D3, 30, 00, 00, 00, 00, 00 Response 06 Comment Up (for OSD) Command Send String BE, EF, 02, 06, 00, 6D, D2, 34, 00, 00, 00, 00, 00 Response 06 Comment
ViewSonic36PJD6220/PJD6230/PJD6240 Down (for OSD) Command Send String BE, EF, 02, 06, 00, 0B, D2, 32, 00, 00, 00, 00, 00 Response 06 Comment Left (for OSD) Command Send String BE, EF, 02, 06, 00, DA, D3, 33, 00, 00, 00, 00, 00 Response 06 Comment Right (for OSD) Command Send String BE, EF, 02, 06, 00, 38, D2, 31, 00, 00, 00, 00, 00 Response 06 Comment Blank Screen Command Send String BE, EF, 02, 06, 00, DF, DF, 66, 00, 00, 00, 00, 00 Response 06 Comment Keystone Command Send String BE, EF, 02, 06, 00, 3D, DE, 64, 00, 00, 00, 00, 00 Response 06 Comment Keystone Up Command Send String BE, EF, 03, 06, 00, 10, DB, 65, 00, 00, 00, 00, 00 Response 06 Comment Keystone Down Command Send String BE, EF, 03, 06, 00, 23, DB, 66, 00, 00, 00, 00, 00 Response 06 Comment Image Command Send String BE, EF, 03, 06, 00, F2, DA, 67, 00, 00, 00, 00, 00 Response 6 Comment
ViewSonic37PJD6220/PJD6230/PJD6240 ViewMatch Command Send String BE,EF,03,06,00,38,5A,88,00,00,00,00,00 Response 6 Comment Aspect Ratio Command Send String BE, EF, 03, 06, 00, 0D, DA, 68, 00, 00, 00, 00, 00 Response 06 Comment ECO On Command Send String BE, EF, 03, 06, 00, EF, DB, 6A, 00, 00, 00, 00, 00 Response 06 Comment ECO Off Command Send String BE, EF, 03, 06, 00, 3E, DA, 6B, 00, 00, 00, 00, 00 Response 06 Comment Auto Source On Command Send String BE, EF, 03, 06, 00, 89, DB, 6C, 00, 00, 00, 00, 00 Response 06 Comment Auto Source Off Command Send String BE, EF, 03, 06, 00, 58, DA, 6D, 00, 00, 00, 00, 00 Response 06 Comment Factory Reset Command Send String BE, EF, 03, 06, 00, 6B, DA, 6E, 00, 00, 00, 00, 00 Response 06 Comment Lamp Hour Command Send String BE, EF, 03, 06, 00, BA, DB, 6F, 00, 00, 00, 00, 00 Response Lamp Hour Comment
ViewSonic38PJD6220/PJD6230/PJD6240 Firmware Version Command Send String BE, EF, 03, 06, 00, D5, D9, 70, 00, 00, 00, 00, 00 Response Version Comment System Status Command Send String BE, EF, 03, 06, 00, 04, D8, 71, 00, 00, 00, 00, 00 Response 03 :Projector ON (Normal Mode) Comment Volume Command Send String BE, EF, 02, 06, 00, F8, DC, 71, 00, 00, 00, 00, 00 Response 06 Comment Volume+ Command Send String BE, EF, 02, 06, 00, F1, DE, 68, 00, 00, 00, 00, 00 Response 06 Comment Volume-Command Send String BE, EF, 02, 06, 00, 20, DF, 69, 00, 00, 00, 00, 00 Response 06 Comment Mute (Audio) Command Send String BE, EF, 02, 06, 00, 0E, DE, 67, 00, 00, 00, 00, 00 Response 06 Comment Change to Computer1 (Analog RGB) Channel Command Send String BE, EF, 03, 19, 00, 19, 29, 01, 47, 02, CC, CC, 00 Response 06 Comment Change to YcbCr Channel Command Send String BE, EF, 03, 19, 00, 89, E8, 01, 47, 02, CC, CC, 00 Response 06 Comment
ViewSonic39PJD6220/PJD6230/PJD6240 Change to S-Video Channel Command Send String BE, EF, 03, 19, 00, E8, 69, 01, 47, 02, CC, CC, 00 Response 06 Comment Change to Composite Video Channel Command Send String BE, EF, 03, 19, 00, 78, A8, 01, 47, 02, CC, CC, 00 Response 06 Comment Change to HDTV(Y-Pb-Pr) Channel Command Send String BE, EF, 03, 19, 00, DA, 2B, 01, 47, 02, CC, CC, 00 Response 06 Comment Change to Computer2(Analog RGB) Channel Command Send String BE, EF, 03, 19, 1E, 90, 72, 01, 47, 02, CC, CC, 00 Response 06 Comment * The output effects of Change to YcbCr Channel Command and Change to HDTV(Y-Pb-Pr) Channel Command are the same as that of Change to Computer1 (Analog RGB) Channel Command. TXDCTSZ RXDRSTZ GND
ViewSonic 40PJD6220/PJD6230/PJD6240 Compatibility ModesComputer: Video: Compatibility Resolution H-Sync [KHz] V-S ync [Hz] VGA 640 x 480 31.5 59.9 37.9 72.8 37.5 75.0 43.3 85.0 SVGA 800 x 600 35.2 56.3 37.9 60.3 48.1 72.2 46.9 75.0 53.7 85.1 XGA 1024 x 768 48.4 60.0 56.5 70.1 60.0 75.0 68.7 85.0 SXGA 1152 x 864 64.0 70.0 67.5 75.0 1280 x 960 60.0 60.0 75.0 75.0 1280 x 1024 64.0 60.0 WXGA 1280 x 768 47.8 60.0 60.3 74.9 68.6 84.8 1280 x 800 49.7 59.8 62.8 74.9 Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) 480i 15.8 kHz 60 Hz 480p 31.5 kHz 60 Hz 576i 15.6 kHz 50 Hz 576p 31.3 kHz 50 Hz 720p 45.0 kHz 60 Hz 720p 37.5 kHz 50 Hz 1080i 33.8 kHz 60 Hz 1080i 28.1 kHz 50 Hz
ViewSonic 41PJD6220/PJD6230/PJD6240 TroubleshootingRefer to the symptoms and measures listed below before sending the projector forrepairs. If the problem persists, contact your local reseller or service center. Please refer to Indicator Messages as well.Start-up problemsIf no lights turn on:„ Be sure that the power cord is securely connected to the projector and the other endis plugged into an outlet with power. „ Press the power button again. „ Unplug the power cord and wait for a short while, then plug it in and press the powerbutton again. Image problemsIf the searching source is displayed:„ Press the Source button one or more times to select another active input source. „ Be sure the external source is turned on and connected. „ For a computer connection, ensure your notebook computer’s external video port isturned on. Refer to the computer manual. If the image is out of focus: „ Be sure the lens cover is open. „ While displaying the on-screen menu, adjust the focus ring. (The image size shouldnot change; if it does, you are adjusting the zoom, not the focus.) „ Check the projection lens to see if it needs cleaning. If the image is flickering or unstable for a computer connection: „ Press the Resync button on the control panel . „ Press the Menu button on the control panel or the MENU button on the remote control, go to Computer Image and adjust Frequency or Tracking. Remote control problemsIf the remote control does not operate:„ Be sure nothing is blocking the remote control receiver on the front or back of the projector. Use the remote control within the effective range. „ Aim the remote control at the screen or at the front or back of the projector. „ Move the remote control so it is more directly in front of or behind the projector andnot as far to the side.
ViewSonic42PJD6220/PJD6230/PJD6240 Customer Support For technical support or product service, see the table below or contact\ your reseller. Note : You will need the product serial number. Country/RegionWeb SiteT=Telephone F=FaxE-mail Australia/New Zealandwww.viewsonic.com.auAUS=1800 880 818 NZ=0800 008 [email protected] Canadawww.viewsonic.comT (Toll-Free)= 1-866-463-4775T (Toll)= 1-424-233-2533F= [email protected] Europe/Middle East/Baltic countries/North Africawww.viewsoniceurope.comContact your reseller Hong Kongwww.hk.viewsonic.comT= 852 3102 [email protected] Indiawww.in.viewsonic.comT= 1800 11 [email protected] Koreawww.kr.viewsonic.comT= 080 265 [email protected] Latin America (Argentina)www.viewsonic.com/la/T= 0800 666 [email protected] Latin America (Brazil)www.viewsonic.com/la/T= 0800 891 [email protected] Latin America (Chile)www.viewsonic.com/la/T= 800 440 [email protected] Latin America (Columbia)www.viewsonic.com/la/T= 01 800 915 [email protected] Latin America (Mexico)www.viewsonic.com/la/T= 001 800 514 [email protected] Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America (Peru)www.viewsonic.com/la/T= 0800 [email protected] Macauwww.hk.viewsonic.comT= 853 700 [email protected] Puerto Rico & Virgin Islandswww.viewsonic.comT= 1-800-688-6688 (English)T= 1-866-379-1304 (Spanish)F= 1-909-468-1202 [email protected] [email protected] Singapore/Malaysia/Thailandwww.ap.viewsonic.comT= 65 6461 [email protected] South Africawww.viewsoniceurope.comwww.viewsoniceurope.com/uk/Support/Calldesk.htm United Kingdomwww.viewsoniceurope.com/uk/www.viewsoniceurope.com/uk/Support/Calldesk.htm United Stateswww.viewsonic.comT (Toll-Free)= 1-800-688-6688T (Toll)= 1-424-233-2530F= [email protected]
ViewSonic43PJD6220/PJD6230/PJD6240 Limited Warranty VIEWSONIC® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and w\ orkmanship, under normal use, during the warranty period. If a product proves to be defect\ ive in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may includ\ e remanufactured or refurbished parts or components. How long the warranty is effective: North and South America: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer purchase. Europe: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer purchase. Other regions or countries: Please check with your local dealer or local ViewSonic office for the warranty information. Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed lamp only. All accessory lamps purchased separately are warranted for 90 days. Who the warranty protects: This warranty is valid only for the first consumer purchaser. What the warranty does not cover: 1. Any product on which the serial number has been defaced, modified o r removed. 2. Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. b. Repair or attempted repair by anyone not authorized by ViewSonic. c. Any damage of the product due to shipment. d. Removal or installation of the product. e. Causes external to the product, such as electric power fluctuations or failure. f. Use of supplies or parts not meeting ViewSonic’s specifications. g. Normal wear and tear. h. Any other cause which does not relate to a product defect. 3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an extended period of tim\ e. 4. Removal, installation, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to “Customer Support” page). You will need to provide your product’s serial number. 2. To obtain warranted service, you will be required to provide (a) the or\ iginal dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) \ the serial number of the product. 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.