ViewSonic Pjd6230 Projector User Manual

							
ViewSonic24PJD6220/PJD6230/PJD6240

Control Panel
ItemDescription
Date Setting
Time Setting
Update date setting on the projector.
Update time setting on the projector.
Click “Enter” button to save the settings.
Projector NameShow projector name on the current projector.
PowerPower On or Power Off the projector via network.
Input SourceSelect input source.
Picture
BrightnessAdjusts the brightness setting.
ContrastAdjusts the contrast setting.
Color TemperatureSelects the color temperature setting.
KeystoneAdjusts the keystone setting.
Picture ModeSelects the picture mode setting.
Aspect RatioSelects the aspect ratio setting.
FreezeEnable or disable the freeze function.
Computer Image
FrequencyAdjusts the frequency.
TrackingAdjusts the tracking.
H PositionAdjusts the horizontal position.
V PositionAdjusts the vertical position. 
						

							
ViewSonic25PJD6220/PJD6230/PJD6240

Video Image
ColorAdjusts the color setting.
TintAdjusts the tint setting.
SharpnessAdjusts the sharpness setting.
Audio
VolumeAdjusts the volume setting.
MuteEnable or disable the mute function.
Setting
Menu PositionAdjusts the menu position.
ProjectionSelects the projection setting.
Auto SourceEnable or disable the auto source function.
ECO modeEnable or disable the ECO function.
High AltitudeEnable or disable the high altitude function.
OSD TimeoutSelects the OSD timeout setting.
LanguageSelects preferred OSD language.
Factory DefaultEnable or Disable factory default.
Option
ViewMatchEnable or disable ViewMatch.
White IntensitySelects the white intensity setting.
GammaSelects the Gamma setting.
Signal TypeSelects the signal type setting.
Filter ModeEnable or disable filter mode.
Power SavingSelects the power saving setting.
Start-up ScreenSelects the start-up screen setting.
Closed CaptionSelects the closed caption setting.
Blank screenEnable or disable blank function.
■  If the adjustment did not display properly. Please “refresh” or “reload” 
the browser again. 
						

							
ViewSonic26PJD6220/PJD6230/PJD6240

Network
ItemDescription
Network
DHCP
Assign an IP address to the projector from the DHCP server automatically.
ManualAssign an IP address manually.
IP Address Setup IP address when DHCP is disable.
Subnet Mask Setup subnet mask when DHCP is disable.
Gateway Setup gateway when DHCP is disable.
DNS Server Setup DNS server address when DHCP is disable.
Group Name Create projector group. (Max length: 6 characters)
Projector Name
Create projector naming of the current projector. (Max length: 16 characters)
Password
Administrator -Enable Enable administrative password function.
Administrator -Disable Disable administrative password function.
New Password Setup administrative password. (Max length: 4 characters)
Confirm Password Re-enter administrative password.
User - Enable Enable user password function.
User - Disable Disable user password function.
New Password Setup user password. (Max length: 4 characters)
Confirm Password Re-enter user password. 
Click “Submit” button to save the settings.
■  If password is lost, please contact local ViewSonic customer support. 
						

							
ViewSonic27PJD6220/PJD6230/PJD6240

Alert Setting
ItemDescription
Email Setting
ToSetup the mail alert attendee. (Max length: 40 characters)
CcSetup the backup mail alert attendee. (Max length: 40 characters)
SubjectSetup the subject of the alert e-mail. (Max length: 30 characters)
FromSetup the sender e-mail address. (Max length: 40 characters)
SMTP Setting
ServerTo enter the SMTP server (Mail server) name of the company.   
For example: mail.viewsonic.com (Max length: 30 characters)
User NameEnter user name of the sender’s e-mail account. (Max length: 20 characters)
PasswordEnter password of the sender’s e-mail account. (Max length: 14 characters)
Alert Condition
Fan LockThe cooling fan is not operating.
Over TemperatureThe projector internal is over heated.
Lamp FailThe lamp does not light up.
Lamp Time AlertLamp is approaching the end of its useful life in full power operation. \
Replacement is suggested.
Schedule Excution ErrorSchedule Excution Error.
Click “Submit” button to save the settings, then click “Issue Test Mail” to send a test mail to 
check whether all settings and functions are correct. 
						

							
ViewSonic28PJD6220/PJD6230/PJD6240

Schedule
The schedule function is divided into two scheduling categories, as show\
n below:
Weekly Schedule: defines the date of each week will execute the command
Click “Submit” button to create new schedule. To delete schedule, click “Cancel”.
Specific Day: defines the month and day that will execute the command.
Click “Submit” button to create new schedule. To delete schedule, click “Cancel”. 
						

							
ViewSonic29PJD6220/PJD6230/PJD6240

Logout: 
						

							
ViewSonic
30PJD6220/PJD6230/PJD6240
MaintenanceThe projector needs proper maintenance. You should keep the lens clean as dust, dirt
or spots will project on the screen and diminish image quality. If any other parts need
replacing, contact your dealer or qualified service personnel. When cleaning any part
of the projector, always switch off and unplug the projector first.
Warning:
Never open any of the covers on the projector. Dangerous electrical voltages inside
the projector can cause severe injury. Do not attempt to service this product yourself.
Refer all servicing to qualified service personnel.Cleaning the LensGently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.Cleaning the Projector HousingGently wipe with a soft cloth. If dirt and stains are not easily removed, use a soft cloth
damped with water, or water and neutral detergent, and wipe dry with a soft, dry cloth.
„
Turn off the projector and remove the AC power cord from the power outlet 
before beginning maintenance work.
„
Make sure the lens is cool before cleaning.
„
Do not use detergents or chemicals other than those noted above. Do not use 
benzene or thinners.
„
Do not use chemical sprays.
„
Use a soft cloth or lens paper only. 
						

							
ViewSonic
31PJD6220/PJD6230/PJD6240
Replacing the LampAs the projector operates over time, the brightness of the projector lamp gradually
decreases and the lamp becomes more susceptible to breakage. We recommend
replacing the lamp if a warning message is displayed. Do not attempt to replace the
lamp yourself. Contact the qualified service personnel for replacement.
„
The lamp becomes high temperature after turning off the projector with the 
power button. If you touch the lamp, you may scald your finger. When you 
replace the lamp, wait for at least 45 minutes for the lamp to cool down.
„
Do not touch the lamp glass at any time. The lamp may explode due to 
improper handling, including the touching of the lamp glass.
„
Lamp lifetime may differ from lamp to lamp and according to the environment 
of use. There is no guarantee of the same lifetime for each lamp. Some lamps 
may fail or terminate their lifetime in a shorter period of time than other similar 
lamps.
„
A lamp may explode as a result of vibration, shock or degradation as a result of 
hours of use as its lifetime draws to an end. Risk of explosion may differ 
according to the environment or conditions in which the projector and lamp are 
being used.
„
Wear protective gloves and eyeglasses when fixing or detaching the lamp.
„
Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at least 
for 5 minutes to turn off the projector after powering on.
„
Do not operate the lamp in proximity to paper, cloth, or other combustible 
material nor cover it with such materials. Otherwise it could cause a fire.
„
Do not operate the lamp in an atmosphere containing an inflammable 
substance, such as thinner. Otherwise it could cause a fire or explosion.
„
Thoroughly ventilate the area or the room when operating the lamp in an 
oxygen atmosphere (in the air). If ozone is inhaled, it could cause headaches, 
nausea, dizziness, etc.
„
The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury 
inside the lamp will go out of the projector. Leave the area immediately if the 
lamp shatters while being operated and ventilate the area for at least 30 
minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be 
harmful to user’s health. 
						

							
ViewSonic
32PJD6220/PJD6230/PJD6240
1. Turn off the projector.
2. If the projector is installed in a cei ling mount, remove it from the mount.
3. Unplug the power cord.
4. Loosen the screw in the side of the lamp cover and remove the cover.
5. Remove the screws from the lamp module, raise the handle, and lift out the  module.
6. Insert the new lamp module into the projector and tighten the screws.
7. Replace the lamp cover and tighten the screw.
8. Turn on the projector. If the lamp does not turn on after the warm-up period, try  reinstalling the lamp.
9. Reset the lamp hour. Refer to the “Setting” menu.
„
Dispose of the used lamp according to local regulations.
„
Ensure that screws are tightened properly. Screws not tightened fully may 
result in injury or accidents.
„
Since the lamp is made of glass, do not drop the unit and do not scratch the 
glass.
„
Do not reuse the old lamp. This could cause the lamp to explode.
„
Be sure to turn off the projector and unplug the AC power cord before 
replacing the lamp.
„
Do not use the projector with the lamp cover removed. 
						

							
Specifications
Display Type Single 0.55 DLP panel
Resolution (Pixels) XGA (1024 × 768)
Lens Manual Zoom (1.1x)
Screen Size 30” – 250”
Lamp PJD6220: 180W; PJD6230: 200W; PJD6240: 260W
Input / Output Source D-Sub 15 pin, S-video, composite video, USB, RS-232, Audio In, Audio Out, LAN (RJ-45 connector)
Speaker 10 W (5W x 2)
Video Compatibility NTSC 3.58, NTSC4.43 PA L - 6 0 ,  M ,  N
SECAM, HDTV (480i/p, 576i/p, 720p, 1080i)
Scanning Frequency
Horizontal Freq.
Vertical Freq. 31 - 79 KHz
50 - 85 Hz
Environment Operating: Temperature: 5°C to 35°C
Humidity: 30%-85%
Storage:
Temperature: -20°C to 60°C
Humidity: 30%-85%
Power Requirement AC 100 - 240 V, 50 - 60 Hz
Dimension 271 x 223 x 110 mm
Weight 2.9 kg (6.4lb)
Note: Design and Specifications are subject to change without prior notice.
ViewSonic 33PJD6220/PJD6230/PJD6240