ViewSonic Pj406d Projector User Manual

17
ViewSonic PJ406D

The Projector has multilingual On Screen Display menus that 
allow you to make image adjustments and change a variety of 
settings. The projector will automatically detect the source. 
How to operate 
1.  To open the OSD menu, press “Menu ” on the Remote Control  
  or Control Panel.
2. When OSD is displayed, use     keys to select any item in the  
  main menu.  While making a selection on a particular page, press  
  or “Enter” key to enter sub menu.
3. Use      keys to select the...

18
ViewSonic PJ406D

Menu Tree
Image-I Display mode PC/Normal/Movie/sRGB/User
Brightness Contrast
White intensity
Colour temp.
Video Saturation
Sharpness
Image-II Computer Frequency
Computer Phase
Computer Hor. position
Computer Ver. position
Degamma
Aspect ratio 16:9/4:3
Ver. Shift(16:9)
Colour setting  Red
Green Blue
Yellow Cyan
Magenta
Language English/Deutsch/Français/Italiano/Español/
Português/Nederlands/
����/����/���/���Management Menu location
ProjectionKeystone
Source lock On/Off
High altitude...

19
ViewSonic PJ406D

 Language
 Language
  Choose the multilingual OSD menu . Use the   or  key to  
  select your preferred language. 
  Press “Enter” to fi  nalize the selection. 
Colour Setting
 Colour Setting
 Adjust the Red, Green, Blue, Yellow, Cyan and Magenta colors for  
  advanced adjustment of the individual colors.   

20
ViewSonic PJ406D

Image-I
 Display Mode
 There are many factory presets optimized for various types of  
  images.  
  PC: For computer or notebook.
  Movie: For home theater.
  Normal: For normal viewing condition.
  sRGB: For standard color.
  User: Memorize user’s settings.
 Brightness
 Adjust the brightness of the image.
  Press the  to darken image.
  Press the  to lighten the image.
 Contrast
 The contrast controls the degree of difference between the lightest  
  and darkest parts of...

21
ViewSonic PJ406D

“Saturation” function is not supported under computer mode.
 Saturation
 Adjusts a video image from black and white to  fully saturated  
  color.
  Press the  to decrease the amount of color in the image.
  Press the  to increase the amount of color in the image. 
 Sharpness 
 Adjusts the sharpness of the image.
  Press the  to decrease the sharpness.
  Press the  to increase the sharpness.  

22
ViewSonic PJ406D

Image-II
 Frequency
  “Frequency”changes the display data frequency to match the  
  frequency of your computer’s graphic card. If you experience a  
  vertical fl  ickering bar, use this function to make an adjustment.
 Phase
  “Phase” synchronizes the signal timing of the display with the  
  graphic card. If you experience an unstable or fl  ickering image,  
  use this function to correct it.
 Hor. Position (Horizontal Position)
  Press the  to move the image left. 
  Press the...

23
ViewSonic PJ406D

 Menu Location
  Choose the menu location on the display screen.
 Projection
    Front-Desktop 
    The factory default setting. 
    Rear-Desktop 
    When you select this function, the projector reverses the image  
    so you can project behind a translucent screen.
    Front-Ceiling 
    When you select this function, the projector turns the image  
    upside down for ceiling-mounted projection.
    Rear-Ceiling 
    When you select this function, the projector reverses and...

24
ViewSonic PJ406D

 Translucence
  Choose the menu transparency on the display screen.
 Volume
  Press the  to decrease the volume. 
  Press the  to increase the volume. 
 Reset
 Return the adjustments and settings to the factory default values.
  Execute: Returns the settings for all menus to factory default  
  values.
  Cancel: Cancel the revised settings
  

25
ViewSonic PJ406D

 Projection Hours
 Display the projection time.
 Lamp Hours
 Display the cumulative lamp operating time.
 Lamp Reset
 Reset the lamp life hour after replacing a new lamp. 
 Lamp Reminding
 Choose this function to show or to hide the warning message when 
the changing lamp message is displayed. The message will show up 
30 hours before end of life.
 Whisper Mode
 Choose “On” to dim the projector lamp which will lower power 
consumption and extend the lamp life by up to 130%. Choose...

26
ViewSonic PJ406D

Problem: No image appears on screen.
 Ensure all the cables and power connections are correctly and  
  securely connected as described in the “Installation” section.
 Ensure the pins of connectors are not crooked or broken.
 Check if the projection lamp has been securely installed. Please  
  refer to the “Replacing the lamp” section.
 Make sure you have removed the lens cap and the projector is  
  switched on.
 Ensure that the “Hide” feature is not turned on.
Problem:...