ViewSonic Pj406d Projector User Manual

27
ViewSonic PJ406D

 4.
  Verify the resolution setting is less than or equal to 1280 x 1024 
resolution.
 5.  Select the “Change” button under the “Monitor” tab .
 6.  Click on “Show all devices.” Next, select “Standard monitor  
types” under the SP box; choose the resolution mode you need 
under the “Models” box. 
  If you are using a Notebook:
 1.  First, follow the steps above to adjust resolution of the  comput-
er.
 2.  Press the toggle output settings. example:[Fn]+[F4]
   
  If you experience...

28
ViewSonic PJ406D

Problem: Image is out of focus
  Adjusts the Focus Ring on the projector lens.  Refer to page 14.
  Make sure the projection screen is between the required distance  
  4.9 to 32.8 feet (1.5 to 10.0 meters)
 from the projector.
Problem: The image is stretched when displaying 16:9 DVD.
The projector automatically detects 16:9 DVD and adjusts the aspect 
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the...

29
ViewSonic PJ406D

Problem: Message Reminders
 Standby : 
  Replacing the lamp : 
 
  
  Fan failed : 
 
  Over temperature : 
 
  Lamp life exceeded : 
      

30
ViewSonic PJ406D

 Replacing the lamp
The projector will detect the lamp life itself.  It will show you a 
warning message “Lamp life exceeded” When you see this mes-
sage, change the lamp as soon as possible.  
  Make sure the projector has been cooled down for at least 30 
minutes before changing the lamp. 
Warning: Lamp 
compartment is hot!  Allow it to cool down before changing lamp!
Warning: To reduce 
the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may...

31
ViewSonic PJ406D

Remark : 
1.> “*”compressed computer image.
2.> The interlaced analog signals are not supported.
 Compatibility Modes
ModeResolution
(ANALOG)
V.Frequency(Hz) H.Frequency(kHz) 
VESA VGA640 x 3507031.5
VESA VGA640 x 3508537.9
VESA VGA640 x 4806031.5
VESA VGA640 x 4807537.5
VESA VGA640 x 4808543.3
VESA VGA720 x 4007031.5
VESA VGA720 x 4008537.9
VESA SVGA800 x 6006037.9
VESA SVGA800 x 6007248.1
VESA SVGA800 x 6007546.9
VESA SVGA800 x 6008553.7
VESA XGA1024 x 7686048.4
VESA XGA1024 x...

32ViewSonic PJ406D
Customer Support
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product serial number.
Country/RegionWeb siteT = TelephoneF = FAXEmail
United Stateswww.viewsonic.com/support/T= (800) 688-6688F= (909) 468 [email protected]
Canadawww.viewsonic.com/support/T= (866) 463 [email protected]
United Kingdomwww.viewsoniceurope.com/ukT= 0207 949 [email protected]
Europe/Middle East/Baltic...

LIMITED WARRANTY
VIEWSONIC® PROJECTORWhat the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product 
proves to be defective in material or workmanship during the warr anty period, ViewSonic will at its sole option repair or replace 
the product with a like product. Replacement product or parts ma y include remanufactured or refurbished parts or components.
How long the warranty is effective:
North and South America:...