ViewSonic Cde4200-l Manual
Here you can view all the pages of manual ViewSonic Cde4200-l Manual. The ViewSonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 41
30 3.2 Get-Function Listing The PC can interrogate the display for specific information. The Get-Fun\ ction packet format consists of 9 bytes which is similar to the Set-Function packet s\ tructure. Note that the “Value” byte is always = 00. Set-Function description: Length:Total Byte of Message excluding “CR” ID: Identification for each of display Command Type: Identify command type, “g” (0x67h) : Get Command “r” (0x72h) : Valid command Reply “-“ (0x2Dh) : Invalid command Reply Command: Function...
Page 42
31 Reply (Hex Format) Name Length IDCommand Type CommandValue1Value2 Value3 CR Hex 0x380x30 0x350x720x620x300x360x370x0D Example2: Get Brightness from TV-05 , but the Brightness command ID is error and it is NOT in the command table. Send (Hex Format) Name Length IDCommand Type CommandValue1Value2 Value3 CR Hex 0x380x30 0x350x670XD30x300x300x300x0D Reply (Hex Format) Name Length IDCommand Type CR Hex 0x340x30 0x350x2D0x0D Get-function table Set Function LengthIDCommand Type Command Value Range...
Page 43
32 3.3 Remote Control Pass-through mode When PC sets the display to Remote Control Pass through mode, the displa\ y shall send a 7 bytes packet (followed by “CR”) in response to RCU butt\ on activation. Note, that in this mode the RCU shall have no effect on the display function. \ For example: “Volume+” will not change the volume in the but only sends “Vol\ ume+” code to PC over the RS232 port. IR Pass Through-Function format Reply: (Command Type= “p”) Name Length IDCommand Type RCU Code1 (MSB) RCU...
Page 44
33 18 SLEEP 19 MENU 1A UP 1B DOWN 1C LEFT 1D RIGHT 1E OK (ENTER) 1F EXIT 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E2F Note: 1. This IR-pass-through code is different with RCU key code. 2. Special control sequence for POWER key under IR-pass through mode. 2-1. When display is OFF and receives the POWER code: The display will turn on \ itself, then forward the POWER code to the host via RS232. 2-2. When display is ON and receives the POWER code: The display will forward the POWER code to the host...
Page 45
34 Customer Support For technical support or product service, see the table below or contact\ your reseller. NOTE: You will need the product serial number. Use with other Wall-Mount kit may cause instability and possibly result \ in injury. To find the perfect mount for CDE4200-L/CDE3200-L, please browse www.viewsonic.com or call our service team: United States 1-800-688-6688\ , Canada 1-866-463-4775, Europe +44 (0) 207 382 8250 . Country/RegionWebsite T = Telephone F = FAX Email United States...
Page 46
35 Limited Warranty ViewSonic® LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and \ workmanship, under normal use, during the warranty period. If a product proves to be defective in \ material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or repla\ ce the product with a like product. Replacement product or parts may include remanufactured or refurbished p\ arts or components. How long the...
Page 47
36 Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the des\ cription contained herein including the implied warranty of merchantability and fitness for a part\ icular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement\ of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages b\ ased upon inconvenience, loss of use of the product, loss...
Page 48
37 Mexico Limited Warranty ViewSonic® LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and \ workmanship, under normal use, during the warranty period. If a product proves to be defective in material or \ workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a\ like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the...
Page 49
38 Contact Information for Sales & Authorized Service (Centro Autorizado d\ e Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.8\ 23.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col....