Home > Uniden > Communications receiver > Uniden Receiver BC245XLT Operating Instructions

Uniden Receiver BC245XLT Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Uniden Receiver BC245XLT Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 50 Uniden manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Menu for SmartScan
    Press key and you can change several parameters
    used for SmartScan.
    ŸTransfer speed 300, 1200, 2400, (9600) bps
    ŸFlow control setting (Xon/Xoff), RTS/CTS, Off
    ŸDial type (TONE), PULSE
    Transfer Speed
    You can choose the following transfer speeds.
    300,1200,2400,(9600),14400 bps
    9600 is the default.
    Press to exit.
    Flow Control
    You can choose the following flow control settings.
    Xon/Xoff is the default.
    The initial display appears.
    Press for RTS/CTS,
    Press again for non
    flow control.
    Press when desired setting is displayed.
    Dial Type
    You can choose the Dial Type setting.
    Tone is set as a default.
    You can change it to PULSE by pressing .
    67
    C:\Manuals\BC245XLT\BC245XLT.VP
    Tue Jun 15 11:05:17 1999 Color profile: Disabled
    Composite  Default screen 
    						
    							SMARTSCANNER TIPS
    There are literally hundreds of thousands of public safety
    radio licenses in the United States. The editors of the
    Uniden National Frequency Database have poured over
    these records to provide you with the most accurate
    possible download of frequencies for whichever area of the
    country you desire. Because of the volume of data, and
    because some systems operate on expired licenses or
    digital radio systems (which are not included in the dataset
    as they cannot be monitored), we cannot guarantee that
    you will receive every active public safety frequency in your
    area.
    If you find any flaws in your data and you would like to offer
    suggestions, please e-mail them to us at
    [email protected] mail them to us at
    SmartScanner National Database, P.O. Box 610428,
    Newton Highlands, MA 02468. Due to the volume of mail
    we receive, you may not receive a reply.
    The SmartScanner database downloads frequency and
    trunking talk groups (if applicable for your area) to the
    scanner using the following order:
    1. All licenses within your zip code.
    2. All licenses within your community (with more than one
    zip code)
    3. All your county licenses (such as County Sheriff)
    4. All the licenses for all the communities within your
    county (in random order).
    5. Statewide licenses (such as Highway Patrol, state
    forestry, DOT, but not trunking)
    6. National licenses (such as common ambulance, marine,
    and Family Radio Service channels).
    Look at the web sitesUniden.comandTrunktracker.com
    for further information. The downloads are not available
    through the Internet at this time.
    68
    C:\Manuals\BC245XLT\BC245XLT.VP
    Tue Jun 15 11:05:17 1999 Color profile: Disabled
    Composite  Default screen 
    						
    							A few notes about the frequency download order:
    1. The scanner fills up less than its allotted 300 channels if
    there are not more than 300 of the above types of licenses
    in your area.
    2. If there are more than 300 of the above listed types of
    licenses, or you have locked-out some banks prior to the
    download using the Program Lock feature, the scanner
    may run out of memory locations and you may not, for
    example, receive part or all of your county, state or
    nationwide data.
    3. If you wish to also receive a download of frequencies
    and talk groups from an adjacent county, lock those banks
    you wish to keep, shut the scanner off, turn it back on
    again and enter the SmartScanner download mode. Then
    enter a zip code from a community within the adjacent
    county.
    4. The SmartScanner editors used their best efforts to
    delete digital and MDT (mobile data terminal) computer
    records from the database; however, it would be
    impossible to delete them all. Therefore, you may hear
    some non-voice transmissions on the frequencies
    downloaded into your scanner. Make sure you have
    TRUNK mode on to see if these are control channels for a
    trunking system. If not, then you should lock these
    frequencies out or delete them by entering a new
    frequency or entering 0, .
    5. Important: After the download, be sure to press the trunk
    key to see if you have trunk systems now loaded for your
    area. TheBC 245XLTcannot track such systems unless
    the trunking mode is on. Performance of the scanner is not
    hindered if you have TRUNK mode on and you do not have
    a trunk system programmed.
    6. If you have a trunk system programmed (you can tell by
    seeing if the display shows Id SCAN at any time), be sure
    to put the radio into Trunk Search mode at some point to
    discover new talk groups within the trunk system that
    have not been pre-programmed into the
    SmartScanner database.
    7. The database will be updated every 6 to 12 months at
    a minimum.
    69
    C:\Manuals\BC245XLT\BC245XLT.VP
    Tue Jun 15 11:05:17 1999 Color profile: Disabled
    Composite  Default screen 
    						
    							Remote (PC Control) Mode
    You can program and control your scanner remotely from a
    PC using third party software. After connecting the scanner
    to a PC using the Scanner to PC steps (see page 62), turn
    the radio off. Press and hold
    REMOTEkey and turn the
    radio on. Then release the key.bc245will flash on the
    display.
    1. The following screen
    appears.
    2. To control your
    scanner using a PC,
    press . Or, press
    or
    until this screen is
    displayed. Then press
    to select the
    Remote mode.
    3. Use the third party
    software as directed.
    Start Remote Mode
    Turn off the power, then turn it on again.
    PressREMOTEkey,
    until you hear two
    short beeps.
    REMOTE mode
    is selected. To
    distinguish from
    Normal operation
    mode, “KEYLOCK”
    icon flashes.
    During REMOTE
    Control mode, the
    scanner will ignore
    any key (except
    REMOTEkey).
    For information on purchasing third party software to
    program and control yourBC 245XLT, see the flyer
    included in the box with this radio.
    70
    12345678 910BAN K
    DAT A
    SCAN PRI
    C:\Manuals\BC245XLT\BC245XLT.VP
    Tue Jun 15 11:05:19 1999 Color profile: Disabled
    Composite  Default screen 
    						
    							PC Control Parameter
    For your information:
    BPS rate : 2400/4800/9600/19200 bps
    Start/Stop : 1 bit, 1 bit
    Data Length : 8 bit
    Parity bit : None
    Code : ASCII code
    Flow Control : None
    Return Code : Carriage Return only
    Change Transfer Speed
    1. While pressing
    REMOTEkey, turn
    the power on.
    “bc245” flashes on
    the display, then
    changes toSCANr.
    2. Press . Or, press
    or
    until this screen
    appears. Then press
    to display Transfer
    Speed.
    3. To change the
    transfer speed, press
    and .
    Then press to
    select.
    71
    C:\Manuals\BC245XLT\BC245XLT.VP
    Tue Jun 15 11:05:21 1999 Color profile: Disabled
    Composite  Default screen 
    						
    							Clone Mode
    You can clone the frequency data of oneBC 245XLT
    scanner to another. After connecting the two scanners,
    using the Scanner to Scanner steps (See page 63), make
    sure the scanners are turned off. On each scanner, press
    and hold
    REMOTEkey and turn the radio on. Then release
    the key.bc245will appear on the display.
    1. On each scanner,
    press .
    Or press
    or until this
    screen is displayed on
    both scanners. Then
    press . (Clone
    Mode)
    2. Determine the
    scanner that has the
    frequency data that
    you want to transfer.
    This one must be set
    up as the “Master
    Unit”, and the other
    must be set as the
    “Slave Unit”.
    3. On the scanner that
    is the” Master Unit”,
    press the key until
    FirStappears in
    the display.
    4. On the scanner that
    is the” Slave Unit”,
    press the key until
    ClonEappears in
    the display.
    5. Press the key on
    both scanners. The
    data transfer is started
    from the Master Unit
    to the Slave Unit.
    72
    C:\Manuals\BC245XLT\BC245XLT.VP
    Tue Jun 15 11:05:24 1999 Color profile: Disabled
    Composite  Default screen 
    						
    							During the data
    transfer,FirSt”
    andCLONE
    characters will
    continue to flash.
    When the data
    transfer is completed,
    donEdisplays.
    If the data transfer is
    not successful, the
    following error
    message
    will appear.
    73
    C:\Manuals\BC245XLT\BC245XLT.VP
    Tue Jun 15 11:05:25 1999 Color profile: Disabled
    Composite  Default screen 
    						
    							Care and Maintenance
    General Use
    nTurn the scanner off before disconnecting the
    power or replacing the batteries.
    nAlways write down the programmed frequencies in
    the event of memory loss.
    nIf memory is lost, simply reprogram each channel.
    The display shows
    000.000in all channels when
    there has been a memory loss.
    nAlways press each button firmly until you hear the
    entry tone for that key entry.
    Location
    nDo not use the scanner in high-moisture
    environments such as the kitchen or bathroom.
    nAvoid placing the unit in direct sunlight or near
    heating elements or vents.
    nIf the scanner receives strong interference or
    electrical noise, move it or its antenna away from
    the source of the noise. If possible, a higher
    elevation, may provide better reception. Also try
    changing the height or angle of the antenna.
    Cleaning
    nDisconnect the power to the unit before cleaning.
    nClean the outside of the scanner with a mild
    detergent. To prevent scratches, do not use
    abrasive cleaners or solvents. Be careful not to rub
    the LCD window.
    nDo not use excessive amounts of water.
    74
    C:\Manuals\BC245XLT\BC245XLT.VP
    Tue Jun 15 11:05:25 1999 Color profile: Disabled
    Composite  Default screen 
    						
    							Repairs
    nDo not attempt any repair. The scanner contains
    no user serviceable parts. Contact the Uniden
    Customer Service Center or take it to a qualified
    repair technician.
    Birdies
    nAll radios can receive “birdies” (undesired signals).
    If your scanner stops during Scan mode and no
    sound is heard, it may be receiving a birdie. Birdies
    are internally generated signals inherent in the
    electronics of the receiver.
    Press to lockout the channel, and then press
    to resume scanning.
    75
    C:\Manuals\BC245XLT\BC245XLT.VP
    Tue Jun 15 11:05:25 1999 Color profile: Disabled
    Composite  Default screen 
    						
    							Troubleshooting
    If yourBC 245XLTis not performing properly, try the
    following steps.
    Problem Suggestion
    Scanner won’t work. 1. Check the connections at both ends of
    the AC Adapter.
    2. Turn on the wall switch of your room. You could
    be using an outlet controlled by the wall switch.
    3. Move the AC Adapter to another wall
    outlet or replace the battery pack.
    Improper reception. 1. Check the antenna connection or move
    and reposition the antenna.
    2. Move the scanner.
    3. You may be in a remote area which could require
    an optional multi-band antenna.
    Check with your dealer or local electronics store.
    Scan won’t stop. 1. Adjust squelch threshold - refer to page 14,
    Setting the Squelch.
    2. Check the antenna connection.
    3. Check to see if many of the channels are locked
    out. If so, the scanner has less chance of finding
    an active channel.
    4. Review each channel’s frequency to see if it is still
    stored in memory and is correct.
    5. It’s possible that none of the programmed
    frequencies are currently active.
    Scan won’t start. 1. Press the key again.
    2. Adjust the
    SQUELCHcontrol.
    3. Check to see if all channels are locked
    out.
    Weather Scan won’t work. 1. Adjust squelch threshold - refer to
    page 14, Setting the Squelch.
    2. Check the antenna.
    76
    C:\Manuals\BC245XLT\BC245XLT.VP
    Tue Jun 15 11:05:26 1999 Color profile: Disabled
    Composite  Default screen 
    						
    All Uniden manuals Comments (0)

    Related Manuals for Uniden Receiver BC245XLT Operating Instructions