Toshiba Stratagy Dk Installation Guide

Installation-----Stratagy DK--
CAUTION!During the Backup and Restore procedures, the Stratagy DK cannot be
processing calls. When any Backup or Restore function is selected, Adminwill query the Stratagy DK if there are any calls currently in progress. If
calls are in progress, Admin will ask if the calls can be terminated. If call
termination is selected, any current connection will be disconnected and all
ports will be commanded to go off-hook to prevent any further calls. If call
termination is denied,...

Stratagy DKInstallationExample: If Admin displays a 
.5 minute backup time and communication
is at 9600 bps, then:5 min. = 300 
sets.
300 sets. x 800 bytes = 240,000 bytesBytes Per Second values are not exact. Additional amounts have been
factored in to estimate a higher quantity of space than will actually be
required.4. Press Y to continue.
When the backup is complete, the following status message is displayed.
CAUTION!If Stratagy is not rebooted, all ports will remain in an off-hook condition.
5.Press...

lnsfallafion~--------Stratagy DKCAUTION!
Stratagy Voice Processing will be suspended during the restore procedure.Any existing connection is broken. For additional information on the
Restore procedure, see the Caution on Page 26.
2.Enter the number of your selection and a second screen requesting the source directory is
displayed. The directory defaults to c : 
\ADMIN3 \BACKUP. If you have the file(s) in a
different directory, type over the default. 
Be sure to enter the complete path, including the...

Stratagy DKlnsfallafion_ -_---- _- __---~-~__--_l__-The following menu is displayed:
2.Place the upgrade disk into the portable/desktop computer’s floppy-disk drive.
3.The default directory is A:. If you need a different drive, type over the default. PiessEnter.
When the upgrade procedure is complete, the following message is displayed:
4. Press any key.
The portable/desktop computer returns to the C : 
\ADMPN3 DOS prompt. When the
Stratagy DK status light becomes a solid green, Stratagy is operational....

InstallationStratagy DKc---c-II____ ---- --II
NotePossible files you might want to retrieve are. TRACE.OUT and Stratagy.log.
3.Enter the directory to which you want the file to be copied. The default is
C : \AJDMIN3 \TRACE . OUT, If you need a different directory, type over the default. PressEnter.
If the directory already exists, you are given the option of entering a new directory or
overwriting the file.
NoteBe sure to enter the complete path.
FilecopyUse Stratagy Admin’s 
Filecopy option to copy...

Stratagy DKInstallationWhen the copy is complete, the following status box is displayed:
7.Press any key to continue.
Trace DiagnosticsTrace is a diagnostic tool that is designed to assist you in troubleshooting Stratagy’s activity.
When Trace is enabled, it is automatically turned on when Stratagy loads up and logs data
until Stratagy software is shut down.
To log the trace data, you can use a text file called TRACE.OUT. The size of the trace file can
be configured using the truce-cup parameter (see...

-.Stratagy DK
+Site telephone number
4Remote system’s password
And the port upgrade will be activated by Toshiba remotely.
NoteThe Stratagy DK must be reset for the new ports to be activated.
Step 15:Shut Down the Stratagy DKOccasionally you will need to shut down, or exit, Stratagy call pro&sing. Circumstances
include:
+Turning power off to perform hardware maintenance
+Moving the system to another location
CAUTION!Never shut Stratagy down by turning off the Strata DK’s power. Doing so
may corrupt the...

*Shutdown, SCANDISK and Restart - Shuts down, runs ScanDisk program and then
restarts Stratagy.NoteThere is no screen interaction during the running of the 
ScanDisk Utility.
*Shutdown and STOP for power off - Takes Stratagy off-line and does not restart it.
NoteThe “Shutdown and STOP for power off’ option is not available when accessing
Stratagy 
remotely.
3.Highlight your selection and press Enter.
Stratagy DK 
l~stallation Guide April 199733